HOF :  HELIOCTO, Face mills carrying octagonal, round and high feed segmented radius inserts.  
 
 
Facing Profiling Ramp down Slanted shoulder. & chamfer. Helical interpolation
  Designation
D
D1
L
D5Dimensions with RFMT 19 round inserts.
L5Dimensions with RFMT 19 round inserts.
Rd°5Dimensions with RFMT 19 round inserts.
D4
D6Dimensions with FF OFMW inserts.
L6Dimensions with FF OFMW inserts.
Z
Da
ArborFor adaptation click on More Info
Kg
  HOF D050-03-22-R07  50.00  62.5  40.00  63.30  40.50  9.0  44.80  64.00  40.60  3  22.00  A  0.29
  HOF D063-04-22-R07  63.00  75.5  40.00  76.30  40.50  6.0  57.80  77.00  40.60  4  22.00  A  0.48
  HOF D080-05-25.40-R07  80.00  92.5  50.00  93.30  50.50  4.5  74.80  94.00  50.60  5  25.40  B  0.95
  HOF D080-05-27-R07  80.00  92.5  50.00  93.30  50.50  4.5  92.50  94.00  50.60  5  27.00  B  0.90
  HOF D100-06-31.75-R07  100.00  112.5  50.00  113.30  50.50  3.0  94.80  114.00  50.60  6  31.75  C  1.36
  HOF D100-06-32-R07  100.00  112.5  50.00  113.30  50.50  3.0  94.80  114.00  50.60  6  32.00  B  1.33
  HOF D125-08-38.10-R07  125.00  137.5  63.00  138.30  63.50  2.5  119.80  139.00  63.60  8  38.10  C  2.78
  HOF D125-08-40-R07  125.00  137.5  63.00  138.30  63.50  2.5  119.80  139.00  63.60  8  40.00  B  2.70
  HOF D160-10-40-R07  160.00  172.5  63.00  173.30  63.50  1.9  154.80  174.00  63.60  10  40.00  C  3.83
  HOF D160-10-50.80-R07  160.00  172.5  63.00  173.30  63.50  1.9  154.80  174.00  63.60  10  50.80  B  4.46
  HOF D200-12-60-R07  200.00  212.5  63.00  213.30  63.50  1.5  194.80  214.00  63.60  12  60.00  C  7.00
  HOF D250-15-60-R07  250.00  262.5  63.00  263.30  63.50  1.2  244.80  264.00  63.60  15  60.00  C  9.95
  HOF D315-18-60-R07  315.00  327.5  80.00  328.30  80.50  0.9  309.80  329.00  80.60  18  60.00  C  20.93

Helical interpolation is applicable up to and including 100 mm diameter.
ap change according to insert.
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer