HSK FM-SRKIN :  SHRINKIN, thermal chuck collets with high torque HSK DIN69893 form FM taper shanks. Used for Makino's machine models MAG3, MAG4 and V77. These tools are based on the HSK63F type with two drive pins which improve torque transmission.  
 
 
RUNOUT (INT) 0.003MM(.00012 HARDNESS 50-52 SURFACE FINISH N5 SHRINKIN G2.5/25000 RPM COOLANT
  Designation
SS
d2
D1
D2
L
L1
L3		 L
min		 L
max
J
KeyHex key size for the rear stopper screw
Kg
  HSK FM63 SRKIN 6X80  63  6.00  21.0  27.00  80.00  54.0  38.00  25.0  36.0  M5  2.50  0.83
  HSK FM63 SRKIN 8X80  63  8.00  21.0  27.00  80.00  54.0  38.00  25.0  36.0  M6  3.00  2.00
  HSK FM63 SRKIN 10X85  63  10.00  24.0  32.00  85.00  59.0  50.50  31.0  42.0  M8  4.00  0.89
  HSK FM63 SRKIN 12X90  63  12.00  24.0  32.00  90.00  64.0  50.50  36.0  47.0  M10  5.00  0.91
  HSK FM63 SRKIN 14X90  63  14.00  27.0  34.00  90.00  64.0  44.50  36.0  47.0  M10  5.00  0.96
  HSK FM63 SRKIN 16X95  63  16.00  27.0  34.00  95.00  69.0  44.50  39.0  50.0  M12  6.00  0.95
  HSK FM63 SRKIN 18X95  63  18.00  33.0  42.00  95.00  69.0  57.00  39.0  50.0  M12  6.00  1.13
  HSK FM63 SRKIN 20X100  63  20.00  33.0  42.00  100.00  74.0  57.00  41.0  52.0  M16  8.00  1.14
  HSK FM63 SRKIN 25X115  63  25.00  44.0  52.70  115.00  89.0  55.00  47.0  58.0  M16  8.00  1.72
  HSK FM63 SRKIN 32X120  63  32.00  44.0  52.70  120.00  94.0  55.00  47.0  58.0  M16  8.00  1.67
  HSK FM80 SRKIN14X80  80  14.00  27.0  34.00  80.00  54.0  47.00  36.0  47.0  M8  4.00  1.30

A cooling tube must be used with all coolant through HSK spindles (should be ordered separately).
Can be used for carbide and HSS tools.
The driving pins which improve torque transmission can be removed, turning the tool holder into a standard HSK F 63 type.
Balanced to G2.5/25,000 RPM.
For shank dimensions, click on "More Info".
ISCAR can guarantee an unbalance value of no more than 1 gr x mm.
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer