ECP-E4L :  4 flute, 38° helix medium length solid carbide roughing endmills with chip splitting cutting edges for high stock removal rates. Used for machining stainless steel and high temperature alloys.  
 
 
Shouldering Slotting Ramp down Helical interpolation Counter boring
  Designation
D
d
ap
H
L
Flute
Ha°
ShankC-Cylindrical, W-Weldon
Ch		 fz
(min)		 fz
(max)
  Grade
  ECP-E4L 05-12/17C06S57  5.00  6.00  12.00  17.00  57.00  4  38.0  C  0.20  0.02  0.05 IC900
  ECP-E4L 05-12/17W06S57  5.00  6.00  12.00  17.00  57.00  4  38.0  W  0.20  0.02  0.05 IC900
  ECP-E4L 06-14/20C06S57  6.00  6.00  14.00  20.00  57.00  4  38.0  C  0.30  0.03  0.06 IC900
  ECP-E4L 06-14/20W06S57  6.00  6.00  14.00  20.00  57.00  4  38.0  W  0.30  0.03  0.06 IC900
  ECP-E4L 08-18/26C08S63  8.00  8.00  18.00  26.00  63.00  4  38.0  C  0.40  0.03  0.08 IC900
  ECP-E4L 08-18/26W08S63  8.00  8.00  18.00  26.00  63.00  4  38.0  W  0.40  0.03  0.08 IC900
  ECP-E4L 10-22/32C10S72  10.00  10.00  22.00  32.00  72.00  4  38.0  C  0.40  0.03  0.09 IC900
  ECP-E4L 10-22/32W10S72  10.00  10.00  22.00  32.00  72.00  4  38.0  W  0.40  0.03  0.09 IC900
  ECP-E4L 12-26/38C12S83  12.00  12.00  26.00  38.00  83.00  4  38.0  C  0.40  0.04  0.10 IC900
  ECP-E4L 12-26/38W12S83  12.00  12.00  26.00  38.00  83.00  4  38.0  W  0.40  0.04  0.10 IC900
  ECP-E4L 14-30/44C14S100  14.00  14.00  30.00  44.00  100.00  4  38.0  C  0.50  0.04  0.11 IC900
  ECP-E4L 14-30/44W14S100  14.00  14.00  30.00  44.00  100.00  4  38.0  W  0.50  0.04  0.11 IC900
  ECP-E4L 16-34/50C16S100  16.00  16.00  34.00  50.00  100.00  4  38.0  C  0.50  0.05  0.12 IC900
  ECP-E4L 16-34/50W16S100  16.00  16.00  34.00  50.00  100.00  4  38.0  W  0.50  0.05  0.12 IC900
  ECP-E4L 20-42/62C20S125  20.00  20.00  42.00  62.00  125.00  4  38.0  C  0.50  0.05  0.15 IC900
  ECP-E4L 20-42/62W20S125  20.00  20.00  42.00  62.00  125.00  4  38.0  W  0.50  0.05  0.15 IC900

Most recommended for machining stainless steel.
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer