GIPA (full radius W=3-6) :  Precision-ground double-ended inserts, polished to avoid built-up edge, used for external machining of aluminum at medium-to-high feeds.  
 
 
Side slotting Ext. Grooving Ext. Profiling Ext. turning aluminum weels Int. Grooving Int. Profiling Int. Machining Aluminum Wheels Face Grooving Face Grooving & Turning
  Designation
W±0.02
R±0.05
M		 D1
min		 ap
(min)		 ap
(max)		 ft
(min)		 ft
(max)		 fg
(min)		 fg
(max)
  Grade
  GIPA 3.00-1.50  3.00  1.50  2.4  160.0  0.00  1.50  0.15  0.30  0.08  0.16 IC20
  GIPA 3.00-1.50-D  3.00  1.50  2.4  160.0  0.00  1.50  0.19  0.36  0.09  0.19 ID5
  GIPA 3.00-1.50YZ-D  3.00  1.50  2.4  160.0  0.00  1.50  0.19  0.36  0.09  0.19 ID5
  GIPA 4.00-2.00  4.00  2.00  3.2  160.0  0.00  2.00  0.20  0.43  0.10  0.22 IC806 IC20
  GIPA 4.00-2.00-D  4.00  2.00  3.2  160.0  0.00  2.00  0.25  0.53  0.12  0.26 ID5
  GIPA 4.00-2.00YZ-D  4.00  2.00  3.2  160.0  0.00  2.00  0.25  0.53  0.12  0.26 ID5
  GIPA 5.00-2.50  5.00  2.50  3.9  160.0  0.00  2.50  0.21  0.48  0.09  0.24 IC806 IC20
  GIPA 5.00-2.50-D  5.00  2.50  3.9  160.0  0.00  2.50  0.22  0.60  0.11  0.30 ID5
  GIPA 5.00-2.50YZ-D  5.00  2.50  3.9  160.0  0.00  2.50  0.22  0.60  0.11  0.30 ID5
  GIPA 6.00-3.00  6.00  3.00  4.8  160.0  0.00  3.00  0.21  0.58  0.11  0.29 IC4 IC20
  GIPA 6.00-3.00-D  6.00  3.00  4.8  160.0  0.00  3.00  0.26  0.72  0.13  0.36 ID5
  GIPA 6.00-3.00YZ  6.00  3.00  4.8  160.0  0.00  3.00  0.21  0.58  0.11  0.29 IC20
  GIPA 6.00-3.00YZ-D  6.00  3.00  4.8  160.0  0.00  3.00  0.26  0.72  0.13  0.36 ID5
  GIPA 6.00-3.00CB  6.00  3.00  4.8  160.0  0.00  3.00  0.21  0.58  0.11  0.29 ID5

Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer