MM EC-8/MM EC-10 :  MULTI-MASTER 8, 10 flute, 30°and 45° helix, interchangeable solid carbide endmill heads with various corner radii  
 
 
Shouldering Slotting Ramp down
  Designation
D
Flute
ap
r
Ts
D2
l
Ha°
Rd°		 fz
(min)		 fz
(max)
  Grade
  MM EC160A12R0.5-8T10  16.00  8  12.00  0.50  T10  15.30  20.50  30.0  5.0  0.05  0.13 IC908
  MM EC160A12R0.5-8T10H  16.00  8  12.00  0.50  T10  15.30  20.50  30.0  5.0  0.05  0.13 IC908
  MM EC160A12R1.0-8T10  16.00  8  12.00  1.00  T10  15.30  20.50  30.0  5.0  0.05  0.13 IC908
  MM EC160A12R1.6-8T10  16.00  8  12.00  1.60  T10  15.30  20.50  30.0  5.0  0.05  0.13 IC908
  MM EC160A12R2.0-8T10  16.00  8  12.00  2.00  T10  15.30  20.50  30.0  5.0  0.05  0.13 IC908
  MM EC160B12R0.5-8T10  16.00  8  12.00  0.50  T10  15.30  20.50  45.0  5.0  0.05  0.13 IC908
  MM EC160B12R1.0-8T10  16.00  8  12.00  1.00  T10  15.30  20.50  45.0  5.0  0.05  0.13 IC908
  MM EC160B12R1.6-8T10  16.00  8  12.00  1.60  T10  15.30  20.50  45.0  5.0  0.05  0.13 IC908
  MM EC160B12R2.0-8T10  16.00  8  12.00  2.00  T10  15.30  20.50  45.0  5.0  0.05  0.13 IC908
  MM EC200A15R1.0-10T12  20.00  10  15.00  1.00  T12  18.30  25.50  30.0  3.0  0.05  0.13 IC908
  MM EC200A15R2.0-10T12  20.00  10  15.00  2.00  T12  18.30  25.50  30.0  3.0  0.05  0.13 IC908
  MM EC250A22R0.8-10T15  25.00  10  22.00  0.80  T15  23.90  37.00  30.0  3.0  0.05  0.13 IC908

For Clamping keys (should be ordered separately), tightening torques and clamping instructions, click on "More Info".
Do not apply lubricant to the threaded connection.
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer