HSK A-HYDRO (long) :  Long projection hydraulic chucks with HSK DIN69893 form A tapered shanks.  
 .
 
RUNOUT (INT) 0.003MM(.00012 HARDNESS 58-60 SURFACE FINISH N5 G2.5/HSK63=15000RPM @ HSK100=10000RPM COOLANT
  Designation
SS
d2
D1
D3
D2
L
L1
L3		 L
min		 L
max
J
Kg
  HSK A 63 HYDRO 8X150  63  8.00  25.0  28.00  50.00  150.00  124.0  104.00  27.0  37.0  M6  1.41
  HSK A 63 HYDRO 8X200  63  8.00  25.0  28.00  50.00  200.00  174.0  154.00  27.0  37.0  M6  1.69
  HSK A 100 HYDRO 8X150  100  8.00  25.0  28.00  63.00  150.00  124.0  94.50  27.0  37.0  M6  3.07
  HSK A 100 HYDRO 8X200  100  8.00  25.0  28.00  63.00  200.00  174.0  144.50  27.0  37.0  M6  3.29

Chucking forces will be reduced by 25% if reduction sleeves are used.
A cooling tube must be used with coolant through HSK spindles (ordered separately).
Reduction sleeves are available for 12, 20, 25 and 32 mm bore diameters (must be ordered separately).
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer