MM EC-CF :  MULTI-MASTER interchangeable solid carbide head, 4 flute, 38° helix with variable pitch for roughing and finishing operations. High material removal rates chatter free. Used for machining alloyed and stainless steel and exotic materials.  
 
 
Shouldering Slotting Ramp down Helical interpolation
  Designation
D
Ch
r
Flute
ap
Ts
D2
l
Ha°		 fz
(min)		 fz
(max)
  Grade
  MM EC080E05C3CF-4T05  8.00  0.3  -  4  5.00  T05  7.70  10.00  38.0  0.03  0.09 IC908
  MM EC080E05R05CF-4T05  8.00  -  0.50  4  5.00  T05  7.70  10.00  38.0  0.03  0.09 IC908
  MM EC100E07C4CF-4T06  10.00  0.4  -  4  7.00  T06  9.60  13.00  38.0  0.03  0.10 IC908
  MM EC100E07R05CF-4T06  10.00  -  0.50  4  7.00  T06  9.60  13.00  38.0  0.03  0.10 IC908
  MM EC120E09C5CF-4T08  12.00  0.5  -  4  9.00  T08  11.70  16.50  38.0  0.04  0.11 IC908
  MM EC120E09R05CF-4T08  12.00  -  0.50  4  9.00  T08  11.70  16.50  38.0  0.04  0.11 IC908
  MM EC500E37C20CF-4T08  12.70  0.5  -  4  9.50  T08  12.40  16.50  38.0  0.04  0.11 IC908
  MM EC500E37R0-CF-4T08  12.70  -  -  4  9.50  T08  12.40  16.50  38.0  0.04  0.11 IC908
  MM EC500E37R15CF-4T08  12.70  -  0.39  4  9.50  T08  12.40  16.50  38.0  0.04  0.11 IC908
  MM EC500E37R31CF-4T08  12.70  -  0.78  4  9.50  T08  12.40  16.50  38.0  0.04  0.11 IC908
  MM EC500E37R62CF-4T08  12.70  -  1.56  4  9.50  T08  12.40  16.50  38.0  0.04  0.11 IC908
  MM EC160E12C6CF-4T10  16.00  0.6  -  4  12.00  T10  15.30  20.50  38.0  0.05  0.13 IC908
  MM EC160E12R05CF-4T10  16.00  -  0.50  4  12.00  T10  15.30  20.50  38.0  0.05  0.13 IC908
  MM EC200E15C6CF-4T12  20.00  0.6  -  4  15.00  T12  18.45  25.50  38.0  0.05  0.17 IC908
  MM EC200E15R05CF-4T12  20.00  -  0.50  4  15.00  T12  18.30  25.50  38.0  0.05  0.17 IC908
  MM EC250E22C6CF-4T15  25.00  0.6  -  4  22.00  T15  23.90  37.00  38.0  0.06  0.17 IC908
  MM EC250E22R05CF-4T15  25.00  -  0.50  4  22.00  T15  23.90  37.00  38.0  0.06  0.17 IC908
  MM EC250E22R30CF-4T15  25.00  -  3.00  4  22.00  T15  23.90  37.00  38.0  0.06  0.17 IC908

For Clamping keys (should be ordered separately), tightening torques and clamping instructions, click on "More Info".
Do not apply lubricant to the threaded connection.
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer