EFP-E4,5CF :  4, 5 flute 38° helix, solid carbide roughing endmills with chip splitting cutting edges, variable pitch (CHATTERFREE) and large radius frontal edge for high feed rates (FEEDMILL).  
 
 
Shouldering Slotting Ramp down Helical interpolation Profiling Plunging & recessing
  Designation
D
d
L
rUsed for programming
Flute
Ha°
apMaximum D.O.C. for high feed milling (FEEDMILL)		 ap
max
Rd°		 fz
(min)		 fz
(max)
  Grade
  EFP-E4CF 06-12C06R1.0M57  6.00  6.00  57.00  1.00  4  38.0  0.30  12.00  5.0  0.02  0.30 IC903
  EFP-E4CF 08-16C08R1.4M63  8.00  8.00  63.00  1.40  4  38.0  0.40  16.00  5.0  0.03  0.40 IC903
  EFP-E4CF 10-20C10R1.7M72  10.00  10.00  72.00  1.70  4  38.0  0.50  20.00  5.0  0.03  0.50 IC903
  EFP-E5CF 10-24C10R1.7M72  10.00  10.00  72.00  1.70  5  38.0  0.50  24.00  5.0  0.03  0.50 IC903
  EFP-E4CF 12-25C12R2.0M83  12.00  12.00  83.00  2.00  4  38.0  0.60  24.00  5.0  0.04  0.50 IC903
  EFP-E5CF 12-32C12R2.0M83  12.00  12.00  83.00  2.00  5  38.0  0.60  32.00  5.0  0.04  0.50 IC903
  EFP-E4CF 16-32C16R2.7M92  16.00  16.00  92.00  2.70  4  38.0  0.80  32.00  5.0  0.05  0.60 IC903
  EFP-E5CF 16-40C16R2.7M92  16.00  16.00  92.00  2.70  5  38.0  0.80  40.00  5.0  0.05  0.60 IC903
  EFP-E4CF 20-40C20R3.4M104  20.00  20.00  104.00  3.40  4  38.0  1.00  40.00  5.0  0.05  0.70 IC903
  EFP-E5CF 20-48C20R3.4M104  20.00  20.00  104.00  3.40  5  38.0  1.00  48.00  5.0  0.05  0.70 IC903

Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer