EC-H5M-CFR :  5 flute endmills with different helix (36 - 38°) and variable pitch for chatter dampening with assorted radii. Used for very high material removal rates roughing and finishing operations. Full slot milling-up to 1XD.  
 
 
Shouldering Slotting Ramp down Helical interpolation
  Designation
D
d
ap
L
Flute
r
Rd°
ShankC-Cylindrical, W-Weldon		 fz
(min)		 fz
(max)
  Grade
  EC-H5M 04-09C06CFR0.2-57  4.00  6.00  9.00  57.00  5  0.20  5.0  C  0.02  0.04 IC900
  EC-H5M 05-11C06CFR0.2-57  5.00  6.00  11.00  57.00  5  0.20  5.0  C  0.02  0.04 IC900
  EC-H5M 06-13C06CFR0.2-57  6.00  6.00  13.00  57.00  5  0.20  5.0  C  0.03  0.07 IC900
  EC-H5M 06-13W06CFR0.2-57  6.00  6.00  13.00  57.00  5  0.20  5.0  W  0.03  0.07 IC900
  EC-H5M 08-19C08CFR0.4-63  8.00  8.00  19.00  63.00  5  0.40  5.0  C  0.03  0.09 IC900
  EC-H5M 08-19W08CFR0.4-63  8.00  8.00  19.00  63.00  5  0.40  5.0  W  0.03  0.09 IC900
  EC-H5M 10-22C10CFR0.5-72  10.00  10.00  22.00  72.00  5  0.50  5.0  C  0.03  0.10 IC900
  EC-H5M 10-22W10CFR0.5-72  10.00  10.00  22.00  72.00  5  0.50  5.0  W  0.03  0.10 IC900
  EC-H5M 12-26C12CFR0.6-83  12.00  12.00  26.00  83.00  5  0.60  5.0  C  0.04  0.11 IC900
  EC-H5M 12-26W12CFR0.6-83  12.00  12.00  26.00  83.00  5  0.60  5.0  W  0.04  0.11 IC900
  EC-H5M 16-32C16CFR0.8-92  16.00  16.00  32.00  92.00  5  0.80  5.0  C  0.05  0.13 IC900
  EC-H5M 20-38C20CFR1-104  20.00  20.00  38.00  104.00  5  1.00  5.0  C  0.05  0.17 IC900
  EC-H5M 20-38W20CFR1-104  20.00  20.00  38.00  104.00  5  1.00  5.0  W  0.05  0.17 IC900

Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer