DGFHR/L :  Double and single ended, parting and grooving reinforced blades for DO-GRIP inserts.  
 
 
Ext. Grooving Parting
  Designation
B1		 W
minFor DG: 1.0 insert - modify holder.		 W
max
A2
A
l1
h1		 D
maxThe specified limit refers to the tool.
R/L
  DGFHR 26T16-2  26.0  1.90  2.50  8.0  1.70  110.00  21.4  42.0  R
  DGFHL 26T23-2  26.0  1.90  2.50  8.0  1.60  110.00  21.4  42.0  L
  DGFHR 26T23-2  26.0  1.90  2.50  8.0  1.60  110.00  21.4  42.0  R
  DGFHL 26T16-3  26.0  3.00  3.18  8.0  2.40  110.00  21.4  30.0  L
  DGFHR 26T16-3  26.0  3.00  3.18  8.0  2.40  110.00  21.4  30.0  R
  DGFHL 26T23-3  26.0  3.00  3.18  8.0  2.40  110.00  21.4  42.0  L
  DGFHR 26T23-3  26.0  3.00  3.18  8.0  2.40  110.00  21.4  42.0  R
  DGFHL 32T22-2  32.0  1.90  2.50  8.0  1.60  110.00  24.8  42.0  L
  DGFHR 32T22-2  32.0  1.90  2.50  8.0  1.60  110.00  24.8  42.0  R
  DGFHL 32T22-4  32.0  4.00  4.00  8.0  3.40  110.00  24.8  42.0  L
  DGFHR 32T22-4  32.0  4.00  4.00  8.0  3.40  110.00  24.8  42.0  R
  DGFHL 32T33-3  32.0  3.00  3.18  8.0  2.40  110.00  24.8  60.0  L
  DGFHR 32T33-3  32.0  3.00  3.18  8.0  2.40  110.00  24.8  60.0  R
  DGFHL 32T33-4  32.0  4.00  4.00  8.0  3.40  110.00  24.8  60.0  L
  DGFHR 32T33-4  32.0  4.00  4.00  8.0  3.40  110.00  24.8  60.0  R
  DGFHL 32T41-4  32.0  4.00  4.00  10.0  3.40  110.00  24.8  80.0  L
  DGFHR 32T41-4  32.0  4.00  4.00  8.0  3.40  110.00  24.8  80.0  R

Insert limit is Tmax=18 mm. If deeper penetration is required, the insert should be modified into single-ended by the user.
DG..1.0 insert can be mounted into pocket sizes 2 and 3. In that case the pocket width has to be modified-click on "More Info"
Print  Send by mail  Save to word  Save to Excel


Terms of Use and Legal Disclaimer