ADCA 1503..R
HELIMILL flat rake inserts with a variety of corner radii, used for profiling and for specific corner dimensions.
|
|
ADCR 1505PDFR
Super Positive Precision Inserts, for Aluminum, Stainless Steel and High Temperature Alloys
|
|
ADCT 1505PDFR-HM
Peripherally Ground Inserts, for Finishing and General Use Applications
|
|
ADKR 1505PD-R/L-HM
Super Positive Inserts, for Machining Aluminum, Stainless Steel and High Temperature Alloys
|
|
ADKT 1505..R/L-HM
Inserts with 2 Helical Cutting Edges and Various Corner Radii for General Use
|
|
|
ADKT 1505PDTR-76
Insert with 2 Helical Cutting Edges with Ribs Along Edge, for Interrupted Cut
|
|
ADMA 150308
HELIMILL flat rake, general use milling insert.
|
|
|
|
|
ADMT 1505PDR-HS
Inserts with a Serrated Cutting Edge for Chip Splitting, for Roughing
|
|
HM90 ADCT 1505
General Use Inserts with 2 Helical Cutting Edges, for High 90° Shoulder Accuracy
|
|
ADKT 1505PDTR-8M
Insert with Reinforced Helical Cutting Edge, for Interrupted Cut and Heavy Milling
|
|
|
HM90 ADCR 1505PDFR-P
Peripherally Ground Insert with a Super Positive Polished Rake, for Machining Aluminum and High Temperature Alloys
|
|
HM90 ADKW 1505PDR
Milling Inserts for Unfavorable Conditions and Heavy Interrupted Cut on Hardened Steel
|
|
|
|
