EFP-E4,5CF
Solid Carbide Roughing Endmills with Chip Splitting Cutting Edges, Variable Pitch and Large Radius Frontal Edge

MTECS-W
Short Solid Carbide Internal or External Threading Endmills for BSP and BSF Thread Profiles

ECAP-H3-CF
Solid Carbide Endmills with Different Helix, Variable Pitch, Chip Splitters and Coolant Holes for Machining Aluminum

EC-A-2
2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills

ECC-A-2
2 Flute, 30° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners

EB-A-4 (medium length)
4 Flute, 30° Helix Medium Length Solid Carbide Ball Nose Endmills

EBL-A-4
4 Flute, 30° Helix Long Solid Carbide Ball Nose Endmills

ECL-B-4/6
4 & 6 Flute, 45° Helix Long Solid Carbide Endmills

EC-E-3
3 Flute, 38° Helix Medium Length Solid Carbide Endmills

EC-A-4
4 Flute, 30° Helix Medium Length Solid Carbide Endmills

EC-B-4
4 Flute, 45° Helix Medium Length Solid Carbide Endmills

ECC-E-3
3 Flute, 38° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners

ECC-A-4
4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Chamfered Corners

EB-A-2
2 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills

EB-A-4 (short length)
4 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills

ECXL-B-4/6
4 & 6 Flute, 45° Helix Extra Long Solid Carbide Endmills

ECH-B-6
6 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc

ECA-B-2
2 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum

ERF-A/E-3,4,6
3, 4, 6 Flute, 30° and 38° Helix, (3xD) Solid Carbide Roughing Endmills with Relieved Neck for Alloy and Stainless Steel

ERC-E-3
3 Flute, 38° Helix Medium Length (3xD) Solid Carbide Roughing Endmills with Relieved Necks, for Machining Aluminum

EB-A-3
3 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills

EC-B-3R
3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills with Various Radii

EC-B-4R
4 Flute, 45° Helix Medium Length Solid Carbide Endmills with Various Radii

ECA-F-2
2 Flute, 55° Helix Medium Length Solid Carbide Endmills for Machining Aluminum

EC-D6
6 Flute, 50° Helix Medium Length Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc

MTECS-ISO
Small Diameter Solid Carbide Internal ISO Profile Threading Endmills

EC-A-4R
4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Various Radii

ECF../45
45° Chamfering and Countersinking Solid Carbide Endmills

ECR-B-S
4-7 Flute, 45° Helix Short Length (1xD) Solid Carbide Roughing Endmills

ECR-B-L
4-7 Flute, 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks

ECR-B-M/ECR-B-M...R
4-7 Flute, 45° Helix Medium Length (2xD) Solid Carbide Roughing Endmills

ECR-B-X
4-5 Flute, 45° Helix Solid Carbide Roughing Endmills with 4xD Relieved Necks

MTEC-ISO
Solid Carbide Internal Threading Endmills for ISO Thread Profile

MTEC-W
Solid Carbide Threading Endmills, for Internal or External BSP Thread Profile

MTEC-UN
Solid Carbide Threading Endmills for Internal UN Thread Profile

MTEC-BSPT
Solid Carbide Threading Endmills, for External or Internal BSPT Thread Profile

MTEC-NPT
Solid Carbide Threading Endmills, for External or Internal NPT Thread Profile

MTEC-NPTF
Solid Carbide Threading Endmills, for External or Internal NPTF Thread Profile

ECR-B3-R
3 Flute, (3xD), 45° Helix Solid Carbide Roughing Endmills with Relieved Necks, for High Stock Removal Rates of Aluminum

ECA-B-3
3 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum

ECR-T-M
4 Flute, 20° Helix Medium Length Solid Carbide Roughing Endmills, for High Stock Removal Rates

EB-A2 (rib processing)
2 Flute, 30° Helix Rib Processing Solid Carbide Ball Nose Endmills, for Materials up to 65 HRc

EBRF-T
3, 4 Flute, 20° Helix Long Solid Carbide Roughing Ball Nose, for Materials up to 55 HRc

EC-A2 (rib processing)
2 Flute, 30° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRc

EC-A3/E3 (economical-short)
Economical Type 3 Flute, 30° and 38° Helix Center Cutting Short Solid Carbide Endmills

EC-A4
4 Flute, 30° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc

EC-B3 (economical-short)
Economical Type 3 Flute, 45° Helix Center Cutting Short Solid Carbide Endmills

EC-B4-R
4 Flute, 45° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii, for Hardened Steel

ECT-A2
2 Flute, 30° Tapered Helix Solid Carbide Endmills, for Hardened Steel

ESB-A2
2 Flute, 30° Helix Spherical Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRc

ESB-A4
4 Flute, 30° Helix Spherical Long Solid Carbide Ball Nose Endmills, for Materials up to 65 HRc

MTECS-UN
Small Diameter Solid Carbide UN Profile Threading Endmills, for Hardened Steel

EC-A2 (medium length)
2 Flute, 30° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc

EC-B6
6 Flute, 45° Helix Extra Long Solid Carbide Endmills, for Finishing of Hard Materials up to 65 HRc

EC-A4(economical-extra long)
Economical Type 4 Flute, 30° Helix Center Cutting Extra Long Solid Carbide Endmills

EFS-B44
Combination of Roughing and Finishing Solid Carbide Endmill in a Single Tool

EB-A4 (economical-short)
Economical Type 4 Flute, 30° Helix Ball Nose Short Solid Carbide Endmills

EB-A2 (stub cut length)
2 Flute, 30° Helix Stub Cut Length, Ball Nose Solid Carbide Endmills, for Materials up to 55-70 HRc

EB-A2 (tapered flute & neck)
2 Flute, 30° Helix Tapered Flute and Neck, Solid Carbide Ball Nose Endmills for Materials up to 65 HRc

MTECB-ISO
Solid Carbide Internal Threading Endmills with Coolant Holes for ISO Thread Profile

MTECB-UN
Solid Carbide Threading Endmills with Coolant Holes, for Internal UN Thread Profile

MTECB-NPT
Solid Carbide Threading Endmills with Coolant Holes, for External or Internal NPT Thread Profile

MTECB-NPTF
Solid Carbide Threading Endmills with Coolant Holes, for External or Internal NPTF Thread Profile

MTECB-W
Solid Carbide Internal or External Threading Endmills with Coolant Holes, for BSP Thread Profile

MTECB-BSPT
Solid Carbide External or Internal Threading Endmills with Coolant Holes, for BSPT Thread Profile

EB-A2 (economical)
Economical Type 2 Flute, 30° Helix Ball Nose Solid Carbide Endmills

ECP-E3L
3 Flute, (3xD), 38° Helix Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges and Relieved Necks

ECP-E4L
4 Flute, (3xD), 38° Helix Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges and Relieved Necks

ETR-A2
2 Flute Toroidal Endmills

ECR-B-MF
4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc

MTECSH-ISO
Small Diameter Short Left-Hand, Solid Carbide Internal ISO Profile Threading Endmills, for Hardened Steel

MTECSH-UN
Small Diameter Short Left-Hand Solid Carbide UN Profile Threading Endmills, for Hardened Steel

MTEC E-ISO
Solid Carbide External Threading Endmills for ISO Thread Profile

MTEC E-UN
Solid Carbide Threading Endmills with UN Form, for External Threading

EC-E4L-CF
4 Flute Endmills, 38° Helix, Variable Pitch for Chatter Dampening with 3xD Relieved Necks

EC-E5L-CF
5 Flute Endmills, 38° Helix, Variable Pitch Medium Length (1xD)

MTECZ-ISO
Solid Carbide Internal Threading Endmills with Coolant Holes Located in the Flutes

MTECZ-BSF/BSP
Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes, for Internal or External BSF/BSP Thread

MTECZ-UN
Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes, for Internal UN Thread Profile

MTECZ-NPT
Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes, for Internal or External NPT Thread Profile

MTECZ-BSPT
Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes, for Internal or External BSPT Thread Profile

EB-A2 (long with neck)
2 Flute, 30° Helix Long Solid Carbide, Ball Nose Endmills with Neck for Materials up to 65 HRc

EB-A2 (extra long)
2 Flute, 30° Helix Extra Long Solid Carbide Ball Nose Endmills, for Materials up to 65 HRc

EB-A2 (precision stub cut)
2 Flute, 30° Helix High Precision Ball Nose, Stub Cut Length, for Materials up to 65 HRc

MTECS-MJ
Small Diameter Short Solid Carbide MJ-Type Profile Threading Endmills

MTECS-UNJ
Small Diameter Short Solid Carbide UNJ-Type Profile Threading Endmills

MTECI-A60
60° Partial Profile Solid Carbide Thread Mills with Coolant Holes for Internal and External Threads

EFF-S4
4 Flute High Productivity Solid Carbide Endmills

EC-A2 (economical-medium)
Economical Type 2 Flute, 30° Helix Center Cutting Medium Length Solid Carbide Endmills

EC-A2(economical-extra long)
Economical Type 2 Flute, 30° Helix Center Cutting Extra Long Solid Carbide Endmills

EC-A3/E3 (economical-medium)
Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Medium Length Solid Carbide Endmills

EC-B3 (economical-medium)
Economical Type 3 Flute, 45° Helix Center Cutting Medium Length Solid Carbide Endmills

EC-A4 (economical-medium)
Economical Type 4 Flute, 30° Helix Center Cutting Medium Length Solid Carbide Endmills

EFS-E44
Combination of Roughing and Finishing Solid Carbide Endmill with Variable Pitch for Chatter Free Milling

MTECQ ISO
Solid Carbide Endmills with Internal Coolant Holes and a Reduced Diameter Neck, for Deep Internal ISO Profile Threading

MTECQ UN
Solid Carbide Endmills with Internal Coolant Holes and a Reduced Diameter Neck, for Deep Internal UN Profile Threading

EC-H4L-CFR (relieved neck)
4 Flute Endmills with 3xD Relieved Necks, with Assorted Radii, Different Helix and Variable Pitch for Chatter Dampening

EC-H4M-CFR
4 Flute Endmills with Different Helix and Variable Pitch, for Chatter Dampening with Assorted Radii

MTECZ-Whitworth
Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes, for Internal or External Whitworth Thread