MM GRIT-16K/18P
Interchangeable Solid Carbide Small Diameter Groove Milling Heads
|
|
MM HCR
Interchangeable 2 Flute Solid Carbide Ball Nose Milling Heads
|
|
MM EB
Interchangeable Solid Carbide Ball Nose Milling Heads
|
|
MM EC-4
4 Flute Interchangeable Solid Carbide Endmill Heads, 30° and 45° Helix, Various Corner Radii
|
|
MM GRIT-K/P-45A
Interchangeable Solid Carbide Small Diameter 45° Chamfering Heads
|
|
MM TS-N
Interchangeable Solid Carbide T-Slot Milling Heads
|
|
MM HBR
Interchangeable 2 Flute High Precision, Ball Nose Solid Carbide Milling Heads
|
|
MM HCD
2 Flute Interchangeable Solid Carbide Heads, for Chamfering, Countersinking and Spot Drilling
|
|
MM ERS
Interchangeable Solid Carbide Rough Milling Heads, for High Metal Removal Rates
|
|
MM EA
Interchangeable Solid Carbide Slot Drill Milling Heads for Machining Aluminum
|
|
MM HT
Torodial 2 Flute Interchangeable Solid Carbide Heads
|
|
MM ETR
Torodial 6 Flute Interchangeable Solid Carbide Heads
|
|
MM ECU
3 Flute Undersized Interchangeable Solid Carbide Heads for Keyways (DIN 6885)
|
|
MM HC
Interchangeable Solid Carbide Slot Drill Milling Heads with Two 10° Helix Flutes
|
|
MM FF
2 Flute FEEDMILL Interchangeable Solid Carbide Heads, for Milling at Very High Feed and Small D.O.C.
|
|
MM ECF45
Interchangeable Solid Carbide Heads, for Chamfering and Countersinking
|
|
MM TS-H
Interchangeable Solid Carbide T-Slot Milling Heads with Various Corner Radius
|
|
MM HR
Interchangeable 2 Flute Solid Carbide, Concave Radius Milling Heads
|
|
MM HCF
Interchangeable 2 flute, solid carbide chamfering head with a MULTI-MASTER adaptation.
|
|
MM EFS
Combination of Roughing and Finishing Interchangeable Solid Carbide Endmill Heads
|
|
MM EBA
2 Flute High Precision, Interchangeable Solid Carbide Ball Nose Heads, for Machining Aluminum
|
|
MT-W-MM
Carbide Milling Heads with a Threaded Connection, for Internal and External 55° BSW Thread Profile
|
|
MM TRD-W
Interchangeable Solid Carbide Milling Heads, for 55° Partial Profile Thread Milling
|
|
MM HDF
2 Flute Interchangeable Solid Carbide Heads, for Upper and Bottom Chamfering
|
|
MT-ISO-MM
Carbide Milling Heads with a Threaded Connection for Internal ISO Metric Thread
|
|
MT-UN-MM
Carbide Milling Heads with a Threaded Connection, for Internal UN Thread Profile
|
|
MM TRD-M
Interchangeable Solid Carbide Milling Heads, for 60° Partial Profile Thread Milling
|
|
MM HRF
Interchangeable 2 Flute Solid Carbide Ball Nose Finish Milling Heads
|
|
|
MM ECS
Centering Drill (DIN 332), Interchangeable Solid Carbide Heads
|
|
MM EC-8/MM EC-10
8, 10 Flute Interchangeable Solid Carbide Endmill Heads, 30° and 45° Helix, Various Corner Radii
|
|
MM EC-CF
Interchangeable Solid Carbide Endmill Heads for Chatter Free Roughing and Finishing Operations
|
|
MM ERA
Interchangeable Solid Carbide Rough Milling Heads, for Machining Aluminum
|
|
MM EC-3
3 Flute 45° Helix, Interchangeable Solid Carbide Endmill Heads
|
|
MM EC-6
6 Flute Interchangeable Solid Carbide Endmill Heads, 30° and 45° Helix, Various Corner Radii
|
|
MM EC-D
6, 8, 10 Flute Interchangeable Solid Carbide Endmill Heads with 50° Helix, for Machining Hardened Steel
|
|
MM EDF
3 Flute Interchangeable Solid Carbide Heads, for Upper and Bottom Chamfering
|
|
MM EFS-CF
4 Flute 38° Helix with Variable Pitch, Solid Carbide Heads for Chatter Free Roughing and Finishing Applications
|
|
MM HT-NCSR
2 Flute Chip Splitting Toroidal, Solid Carbide Milling Heads
|
|
MM HT-NWFR
2 Flute Toroidal Solid Carbide Milling Heads with a Side Tangential Wiper
|
|
MM EFF
4, 6 Flute Solid Carbide Heads for Milling at Very High Feed and Small D.O.C.
|
|
MM EA-CF
Interchangeable Solid Carbide Endmill Heads with Variable Helix for Machining Aluminum
|
|
MM TS-DG
Double-Groove Internal Grooving Heads with Threaded Connection, for Tube Sheets of Heat Exchangers
|
|
MM TS-45
Interchangeable Solid Carbide Small Diameter 45° Chamfering Heads
|
|
MM ECD
NC Spotting Drills for Accurately Locating a Hole without Using a Guide Bushing
|
|
