|
|
MF EWX
Moderate Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges
|
|
ADK
Extended Flute Cutters with ADKT/R-15... Inserts
|
|
APK-FE
Extended Flute Endmills with APKT/R-10... Inserts
|
|
CM D10
Ball Nose Endmills D=10 mm
|
|
DZ-2.25XD
Indexable Serrated Insert Drills, Drilling Depth 2.25xD
|
|
DZ-3XD
Indexable Serrated Insert Drills, Drilling Depth 3xD
|
|
DZ-4XD
Indexable Serrated Insert Drills, Drilling Depth 4xD
|
|
|
|
|
E45KT
45° Endmills, Carrying Octagonal or Round Inserts
|
|
E45X
45° Chamfering Endmills with X/Q/SOMT 06 Inserts
|
|
|
|
E75A
75° Endmills with AP..-1003... Inserts
|
|
E90AC
Drilling Endmills with APKT/ADKT Inserts
|
|
E90SP
Endmills with Square S/XPMT Inserts
|
|
E90X
Endmills with Square Q/S/XOMT Inserts
|
|
E90XC
Drilling Endmills with Square S/XOMT Inserts
|
|
ETS
T-Slot Endmills
|
|
|
GM
Endmills for Groove Milling, with GIPI/GIFI/TIPI Inserts
|
|
SPK
Extended Flute Endmills with S/XPMT / QPMR 10... Inserts
|
|
XOK
Extended Flute Endmills with S/Q/XOMT-06.. Inserts
|
|
|
|
|
ECM
Multifunctional Endmills for Four Insert Shapes
|
|
|
3M E90AX
90° Endmills for 3M AXKT...Inserts
|
|
3M AXK-13
Heavy Duty Extended Flute Endmills with 3M AXKT 1304... Inserts
|
|
|
|
|
|
MTSR
Indexable Threading Endmills
|
|
|
|
BCM
Ball Nose Endmills with Tangent Straight Edge Inserts for Finish Profiling
|
|
3M E45AX-20
Heavy Duty 45° Endmills with 3M AXKT 2006... Inserts
|
|
DCM-3.5D (7.5-20.9 mm)
Indexable Head Drills without a Flange and One Flat Shanks, Drilling Depth 3.5xD, Suitable for Chamfering Holders
|
|
FF EW
Fast Feed Endmills with FF WOMT... Inserts
|
|
PH
High Productivity Center Cutting Plungers with PLHT 1305-PDX Inserts
|
|
PH-A
High Productivity Center Cutting Plungers with Spiral Flutes Carrying PLHT 1305-PDX Inserts
|
|
DCT (M8-M24)
Indexable Head Drills with Chamfering Insert, Mainly for Pre-Thread Holes
|
|
|
|
|
|
HP E90AN-07
Endmills with HELIPLUS HP ANKT 0702.. Inserts
|
|
DR-2D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
|
|
HP ANK-07
Extended Flute Endmills with HP ANK-07... Inserts
|
|
DR-MF-2.25D
Multifunction Drilling, Boring, Facing and External Turning Tool
|
|
|
|
HP ADK-19
Extended Flute Cutters with HP ADCT/ADKT 1906... Inserts
|
|
DR-3D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
|
|
DR-4D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
|
|
TRIB
Grooving Shell Mills with Triple-Edged Precision Ground Inserts
|
|
|
HM90 EAL-22
Long Reach Endmills for Machining Aluminum, with HM90 APCR 2206... Inserts
|
|
H490 E90AX-17
90° Endmills Carrying H490 ANKX 17... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
|
|
|
|
|
T490 LNK-13
Extended Flute Endmills with T490 LNMT/HT 13... Tangentially Clamped Inserts
|
|
H490 E90AX-12
90° Endmills Carrying H490 ANKX 12...Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
|
|
HTP-LN10
Side Plungers Carrying Tangentially Clamped Inserts with 4 Cutting Edges
|
|
T490 LNM-08
Extended Flute Endmills with T490 LNMT/HT 08... Tangentially Clamped Inserts
|
|
T490 ELN-08
90° Face Mills Using Tangentially Clamped Inserts with 4 Helical, 8 mm Long Cutting Edges
|
|
T490 ELN-16
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, 16 mm Long Cutting Edges
|
|
T490 ELN-13
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, 12.5 mm Long Cutting Edges
|
|
FF EWX-05
Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges
|
|
CM D08
Ball Nose Endmills D=8 mm
|
|
SOE45 8/16
Multifunctional Endmills for Octagonal, Square and Round Insert Contours with Various Entry Angles
|
|
FF EWX-04
Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges
|
|
H490 E90AX-09
90° Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
|
|
DCN A-1.5D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 1.5xD
|
|
DCN A-3D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 3xD
|
|
DCN A-5D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 5xD
|
|
DCN A-8D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 8xD
|
|
DCNS-3D
Indexable Head Drills without a Flange and One Flat Shank, Drilling Depth 3xD, Suitable for Chamfering Holders
|
|
DCNS-5D
Indexable Head Drills without a Flange and One Flat Shank, Drilling Depth 5xD, Suitable for Chamfering Holders
|
|
DR-5D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 5xD
|
|
SGSF-W
Grooving and Slitting Cutters with Integral Weldon Shanks
|
|
|
|
|
T490 LNK-16
Extended Flute Endmills with T490 LNMT/HT 16... Tangentially Clamped Inserts
|
|
H490 ANK-09C
Extended Flute Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
|
|
HM390 ETP-10
90° Endmills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges
|
|
