T290 ELN-10
Endmills with Tangentially Clamped Inserts

H490 ANK-09C
Extended Flute Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

MF EWX
Moderate Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges

HM390 ETP-10
90° Endmills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges

CM D10
Ball Nose Endmills D=10 mm

E30 / T230
30° Chamfering Endmills

E45 / T245
45° Chamfering Endmills

E45KT
45° Endmills, Carrying Octagonal or Round Inserts

E45X
45° Chamfering Endmills with X/Q/SOMT 06 Inserts

E60 / T260
60° Chamfering Endmills

E90AC
Drilling Endmills with APKT/ADKT Inserts

E90SP
Endmills with Square S/XPMT Inserts

E90X
Endmills with Square Q/S/XOMT Inserts

E90XC
Drilling Endmills with Square S/XOMT Inserts

ECM
Multifunctional Endmills for Four Insert Shapes

3M E90AX
90° Endmills for 3M AXKT...Inserts

HM90 E90A-10
Endmills for HM90 AP.. 1003... Inserts

HM90 E90AD-15
90° Endmills for HM90 ADKT-1505... Inserts

MTSR
Indexable Threading Endmills

MTSR-Double Insert
Double Insert Threading Endmills with Weldon Shanks

BCM
Ball Nose Endmills with Tangent Straight Edge Inserts for Finish Profiling

FF EW
Fast Feed Endmills with FF WOMT... Inserts

HP E90AN-07
Endmills with HELIPLUS HP ANKT 0702.. Inserts

HP ANK-07
Extended Flute Endmills with HP ANK-07... Inserts

TRIB
Grooving Shell Mills with Triple-Edged Precision Ground Inserts

HP E90AT-19
90° Endmills with HP AD.. 1906.. Inserts

ETS-LN08
Grooving and Slitting Cutters

MTSRH (endmills)
Endmills with Coolant Holes for Helical Threading Inserts

H490 E90AX-12
90° Endmills Carrying H490 ANKX 12...Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

T490 LNM-08
Extended Flute Endmills with T490 LNMT/HT 08... Tangentially Clamped Inserts

T490 ELN-08
90° Face Mills Using Tangentially Clamped Inserts with 4 Helical, 8 mm Long Cutting Edges

T490 ELN-13
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, 12.5 mm Long Cutting Edges

FF EWX-05
Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges

CM D08
Ball Nose Endmills D=8 mm

SOE45 8/16
Multifunctional Endmills for Octagonal, Square and Round Insert Contours with Various Entry Angles

FF EWX-04
Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges

H490 E90AX-09
90° Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

DCN A-1.5D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 1.5xD

DCN A-3D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 3xD

DCN A-5D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 5xD

DCN A-8D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 8xD

SGSF-W
Grooving and Slitting Cutters with Integral Weldon Shanks