A/S-MWLNR/L-W
Top Wedge Lock Boring Bars for Double-Sided Trigon Inserts
|
|
A/S-PDUNR/L
Lever Lock Boring Bars for 55° Negative Rhombic Inserts
|
|
A/S-PWLNR/L
Lever Lock Boring Bars for Double-Sided Trigon Inserts
|
|
A-SVUNR/L
Boring Bars with Internal Coolant Holes for 35° Negative Rhombic Inserts
|
|
A-SXFOR/L
Boring Bars with Coolant Holes Using XOMT Inserts
|
|
DZ-2.25XD
Indexable Serrated Insert Drills, Drilling Depth 2.25xD
|
|
DZ-3XD
Indexable Serrated Insert Drills, Drilling Depth 3xD
|
|
DZ-4XD
Indexable Serrated Insert Drills, Drilling Depth 4xD
|
|
|
|
|
|
GHIUR/L
Undercutting and Turning Boring Bars
|
|
HELIIR/L
Grooving and Turning Bars with Coolant Holes for HELI-GRIP Utility Inserts
|
|
HFIR/L-MC
Boring Bars for Internal Grooving and Turning
|
|
S-CSKPR/L
Clamp Lock Boring Bars for 11° Clearance Square Inserts
|
|
S-CTFPR/L
Clamp Lock Boring Bars for 11° Clearance Triangular Inserts
|
|
S-MTLCR/L-W
Wedge Lock Boring Bars for 7° Clearance Triangular Inserts
|
|
S-MTLNR/L-W
Wedge Lock Boring Bars for Negative Triangular Inserts
|
|
S/A-PCLNR/L
Lever Lock Boring Bars for Negative 80° Rhombic Inserts
|
|
S-PQFNR/L
Lever Lock Boring Bars for Negative Square Inserts with 80° Corners, for Internal Facing
|
|
S-PQLNR/L
Lever Lock Boring Bars for Negative Square Inserts with 80° Corners
|
|
S-PTFNR/L
91° Lead Angle Lever Lock Boring Bars for Negative Triangular Inserts
|
|
E/S-SCLCR/L
Screw Lock Boring Bars for 80° Rhombic Inserts with 7° Clearance
|
|
E/S-SDUCR/L
Screw Lock Boring Bars for 55° Rhombic Inserts with 7° Clearance
|
|
S/A-SQLCR/L
Screw Lock Boring Bars for 80° Square Inserts with 7° Clearance
|
|
S-STFCR/L
Screw Lock Boring Bars for Triangular 7° Clearance Angle Inserts
|
|
A/E/S-STFPR/L
Screw Lock Boring Bars for Triangular Inserts with 11° Clearance
|
|
S-STLCR/L
Screw Clamp Bars for 7° Clearance Triangular Inserts
|
|
A/S-STLPR/L
Screw Lock Boring Bars for Triangular Inserts with 11° Clearance
|
|
S/A-SVLBCR/L
Screw Lock Back Boring Bars for 35° Rhombic 7° Clearance Inserts
|
|
A/S-SVLFCR/L
Screw Lock Boring Bars for 35° Rhombic Inserts with 7° Clearance
|
|
A/S-SVQCR/L
Screw Lock Boring Bars for 35° Rhombic Inserts with 7° Clearance
|
|
E/S-SWUBR/L
Screw Clamp Miniature Boring Bars for Small WBMT Trigon Inserts
|
|
SIR/L
Internal Threading Bars
|
|
TGIR/L-C
Grooving and Turning Bars with Coolant Holes for TOP-GRIP Utility Inserts
|
|
A-SXFOR-DR
Boring and Drilling Bars for XOMT Inserts
|
|
A-SKUNR/L
Screw Lock Boring Bars for 55° Parallelogram Inserts
|
|
|
|
MG
Internal Grooving, Turning and Threading Bars
|
|
S-SUXCR/L-CM
Screw Lock Boring Bars for Four Different 7° Clearance Geometries
|
|
|
MGUHR
Solid Carbide Bars, for Internal Turning and Threading at 4 mm Minimum Bore Diameter
|
|
GEHIR/L
Internal Machining Bars with Coolant Holes
|
|
DCM-3.5D (7.5-20.9 mm)
Indexable Head Drills without a Flange and One Flat Shanks, Drilling Depth 3.5xD, Suitable for Chamfering Holders
|
|
A/E-STFPR-X
Boring Bars for Small Diameters for TPGX 11° Clearance Triangular Inserts
|
|
A/E-SWUCR
Boring Bars for Small Diameters Using WCGT Trigon Inserts
|
|
GEHIMR/L
Internal Machining Boring Bars with Coolant Holes, for Insert Widths Less than 1.9 mm
|
|
GEHIUR/L
Undercutting and Turning Boring Bars with Coolant Holes
|
|
DCT (M8-M24)
Indexable Head Drills with Chamfering Insert, Mainly for Pre-Thread Holes
|
|
|
|
|
GEHIR/L-SC
Internal Machining Solid Carbide Bars with Coolant Holes
|
|
GEHIMR/L-SC
Internal Machining Solid Carbide Bars with Coolant Holes, for Insert Widths Less than 1.9 mm
|
|
DR-2D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
|
|
S-MULNR/L-MW
MULTI-WEDGE Lock Boring Bars for 80° Negative Rhombic, Trigon and Square Inserts
|
|
S-SLANR/L-TANG
Boring Bars for LNMX Tangentially Screw Clamped Insert with 4 Cutting Edges for High Metal Removal Rates
|
|
DR-MF-2.25D
Multifunction Drilling, Boring, Facing and External Turning Tool
|
|
CHAMRING
Drill Holders for Drilling and Chamfering in One Operation
|
|
|
DR-3D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
|
|
DR-4D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
|
|
S-DDUNR/L
R-Clamp Boring Bars for ISO Negative DNMG Inserts
|
|
S-DWLNR/L
R-Clamp Boring Bars for Negative Trigon Inserts
|
|
S-DCLNR/L
R-Clamp Boring Bars for 80° Negative Diamond Inserts
|
|
DCN R-3D
Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 3xD
|
|
DCN R-5D
Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 5xD
|
|
MIFHR
Bars for Face and Internal Grooving, Undercutting and Threading Inserts
|
|
DR-4D-T
Indexable Insert Drills for Non-Rotating Applications with Coolant Holes and One Flat Shanks, Drilling Depth 4xD
|
|
DCN R-8D
Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 8xD
|
|
DCN R-1.5D
Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 1.5xD
|
|
A-PWLNR/L-X
Lever Lock Boring Bars for Negative WNMX Trigon Inserts
|
|
DCN A-1.5D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 1.5xD
|
|
DCN A-3D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 3xD
|
|
DCN A-5D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 5xD
|
|
DCN A-8D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 8xD
|
|
DCN R-12D
Indexable Head Drills with Coolant Holes and Cylindrical Shanks, Drilling Depth 12xD
|
|
DCNS-3D
Indexable Head Drills without a Flange and One Flat Shank, Drilling Depth 3xD, Suitable for Chamfering Holders
|
|
DCNS-5D
Indexable Head Drills without a Flange and One Flat Shank, Drilling Depth 5xD, Suitable for Chamfering Holders
|
|
DR-5D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 5xD
|
|
SXCIB
Broaching Holders for Lathe and Milling Machines
|
|
