C#-ABB :  Adapters with CAMFIX (ISO 26623-1 standard) exchangeable shanks for boring bars with reduction sleeves.  
 
 
COOLANT
Related tool for : C#-ABB

A/S-MWLNR/L-W A/S-MWLNR/L-W
Top Wedge Lock Boring Bars for Double-Sided Trigon Inserts

A/S-PDUNR/L A/S-PDUNR/L
Lever Lock Boring Bars for 55° Negative Rhombic Inserts

A/S-PWLNR/L A/S-PWLNR/L
Lever Lock Boring Bars for Double-Sided Trigon Inserts

A-SVUNR/L A-SVUNR/L
Boring Bars with Internal Coolant Holes for 35° Negative Rhombic Inserts

DZ-2.25XD DZ-2.25XD
Indexable Serrated Insert Drills, Drilling Depth 2.25xD

GHIR/L (W=1.9-6.4) GHIR/L (W=1.9-6.4)
Internal Grooving and Turning Bars

GHIR/L-C (W=4-6.4) GHIR/L-C (W=4-6.4)
Grooving and Turning Bars with Internal Coolant Holes

GHIUR/L GHIUR/L
Undercutting and Turning Boring Bars

HELIIR/L HELIIR/L
Grooving and Turning Bars with Coolant Holes for HELI-GRIP Utility Inserts

HFIR/L-MC HFIR/L-MC
Boring Bars for Internal Grooving and Turning

S-CSKPR/L S-CSKPR/L
Clamp Lock Boring Bars for 11° Clearance Square Inserts

S-CTFPR/L S-CTFPR/L
Clamp Lock Boring Bars for 11° Clearance Triangular Inserts

S-MTLCR/L-W S-MTLCR/L-W
Wedge Lock Boring Bars for 7° Clearance Triangular Inserts

S-MTLNR/L-W S-MTLNR/L-W
Wedge Lock Boring Bars for Negative Triangular Inserts

S/A-PCLNR/L S/A-PCLNR/L
Lever Lock Boring Bars for Negative 80° Rhombic Inserts

S-PQFNR/L S-PQFNR/L
Lever Lock Boring Bars for Negative Square Inserts with 80° Corners, for Internal Facing

S-PQLNR/L S-PQLNR/L
Lever Lock Boring Bars for Negative Square Inserts with 80° Corners

S-PTFNR/L S-PTFNR/L
91° Lead Angle Lever Lock Boring Bars for Negative Triangular Inserts

E/S-SCLCR/L E/S-SCLCR/L
Screw Lock Boring Bars for 80° Rhombic Inserts with 7° Clearance

E/S-SDUCR/L E/S-SDUCR/L
Screw Lock Boring Bars for 55° Rhombic Inserts with 7° Clearance

S/A-SQLCR/L S/A-SQLCR/L
Screw Lock Boring Bars for 80° Square Inserts with 7° Clearance

S/A-SVLBCR/L S/A-SVLBCR/L
Screw Lock Back Boring Bars for 35° Rhombic 7° Clearance Inserts

A/S-SVLFCR/L A/S-SVLFCR/L
Screw Lock Boring Bars for 35° Rhombic Inserts with 7° Clearance

A/S-SVQCR/L A/S-SVQCR/L
Screw Lock Boring Bars for 35° Rhombic Inserts with 7° Clearance

SIR/L SIR/L
Internal Threading Bars

TGIR/L-C TGIR/L-C
Grooving and Turning Bars with Coolant Holes for TOP-GRIP Utility Inserts

DCM-3D (7.5-25.9 mm) DCM-3D (7.5-25.9 mm)
Indexable Head Drills with One Flat Shanks, Drilling Depth 3xD

DCM-5D (7.5-25.9 mm) DCM-5D (7.5-25.9 mm)
Indexable Head Drills with One Flat Shanks, Drilling Depth 5xD

S-SUXCR/L-CM S-SUXCR/L-CM
Screw Lock Boring Bars for Four Different 7° Clearance Geometries

GHIUR/L-C-A(15° & 27.5°)Bars GHIUR/L-C-A(15° & 27.5°)Bars
Internal Grooving and Turning Bars for Machining Aluminum Wheels

DSM-3D (10.0-19.9 mm 3xD) DSM-3D (10.0-19.9 mm 3xD)
Indexable Head Drills with Coolant Holes, Drilling Depth 3xD

GHIFR/L-A GHIFR/L-A
8° / 10° Approach Angle Bars, for Facing and Internal Machining

DCT (M8-M24) DCT (M8-M24)
Indexable Head Drills with Chamfering Insert, Mainly for Pre-Thread Holes

DCM-8D (10-25.9 mm) DCM-8D (10-25.9 mm)
Indexable Head Drills with One Flat Shanks, Drilling Depth 8xD

GHIUR/L-C-22.5A-8V GHIUR/L-C-22.5A-8V
22.5° Approach Angle Bars, for Facing and Internal Machining

GHIUR/L-UC GHIUR/L-UC
45° Undercutting Bars for Internal Turning of Aluminum Wheels

FGHIFR FGHIFR
8° / 10° Approach Angle Bars, for Interrupted Cuts and Back Turning on Aluminum

DSM-5D (10.0-19.9 mm 5xD) DSM-5D (10.0-19.9 mm 5xD)
Indexable Head Drills with Coolant Holes, Drilling Depth 5xD

DR-2D-N DR-2D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD

S-MULNR/L-MW S-MULNR/L-MW
MULTI-WEDGE Lock Boring Bars for 80° Negative Rhombic, Trigon and Square Inserts

S-SLANR/L-TANG S-SLANR/L-TANG
Boring Bars for LNMX Tangentially Screw Clamped Insert with 4 Cutting Edges for High Metal Removal Rates

DR-MF-2.25D DR-MF-2.25D
Multifunction Drilling, Boring, Facing and External Turning Tool

CHAMRING CHAMRING
Drill Holders for Drilling and Chamfering in One Operation

FGHIUR-C-15A-8 FGHIUR-C-15A-8
15° Approach Angle Bars, for Interrupted Cuts and Back Turning on Aluminum

DSM-1.5D (10.0-19.9mm 1.5xD) DSM-1.5D (10.0-19.9mm 1.5xD)
Indexable Head Drills with Coolant Holes, Drilling Depth 1.5xD

DR-3D-N DR-3D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD

DR-4D-N DR-4D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD

S-DDUNR/L S-DDUNR/L
R-Clamp Boring Bars for ISO Negative DNMG Inserts

S-DWLNR/L S-DWLNR/L
R-Clamp Boring Bars for Negative Trigon Inserts

S-DCLNR/L S-DCLNR/L
R-Clamp Boring Bars for 80° Negative Diamond Inserts

GHIR/L (W=7.0-8.3) GHIR/L (W=7.0-8.3)
Internal Grooving and Turning Boring Bars

DR-4D-T DR-4D-T
Indexable Insert Drills for Non-Rotating Applications with Coolant Holes and One Flat Shanks, Drilling Depth 4xD

A-PWLNR/L-X A-PWLNR/L-X
Lever Lock Boring Bars for Negative WNMX Trigon Inserts

DCN A-1.5D DCN A-1.5D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 1.5xD

DCN A-3D DCN A-3D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 3xD

DCN A-5D DCN A-5D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 5xD

DCN A-8D DCN A-8D
Indexable Head Drills with Coolant Holes and One Flat Shanks, Drilling Depth 8xD

DCNS-3D DCNS-3D
Indexable Head Drills without a Flange and One Flat Shank, Drilling Depth 3xD, Suitable for Chamfering Holders

DCNS-5D DCNS-5D
Indexable Head Drills without a Flange and One Flat Shank, Drilling Depth 5xD, Suitable for Chamfering Holders

DR-5D-N DR-5D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 5xD

SXCIB SXCIB
Broaching Holders for Lathe and Milling Machines




Terms of Use and Legal Disclaimer