E30 / T230
30° Chamfering Endmills

MF EWX
Moderate Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges

CM D10
Ball Nose Endmills D=10 mm

E45KT
45° Endmills, Carrying Octagonal or Round Inserts

E45X
45° Chamfering Endmills with X/Q/SOMT 06 Inserts

E90AC
Drilling Endmills with APKT/ADKT Inserts

E90SP
Endmills with Square S/XPMT Inserts

E90X
Endmills with Square Q/S/XOMT Inserts

E90XC
Drilling Endmills with Square S/XOMT Inserts

ERCM
Multifunctional Coarse Pitch Endmills for Four Insert Shapes

3M E90AX
90° Endmills for 3M AXKT...Inserts

HM90 E90A-10
Endmills for HM90 AP.. 1003... Inserts

HM90 E90AD-15
90° Endmills for HM90 ADKT-1505... Inserts

ER
Endmills with Round Inserts for Profiling and Milling of Round Corners

MTSR-C
Indexable Threading Endmills with Cylindrical Carbide Shanks

MTSR-Single Point
Indexable Threading Endmills with Cylindrical Shanks, for Single Point Inserts

BCM
Ball Nose Endmills with Tangent Straight Edge Inserts for Finish Profiling

HCM D12
Ball Nose Multifunction Endmills D=12 mm

HCE
Multifunction Endmills which can Carry Several Insert Geometries

HM90 EAL-16
Long Reach Endmills for Machining Aluminum, with HM90 APCR 1605 Inserts

FF EW
Fast Feed Endmills with FF WOMT... Inserts

HP E90AT-22
90° Endmills with HP AD.. 2207.. Inserts

E93CN
Toroidal Bull Nose Endmills with CNHT...and ENHT... Inserts

HM90 EAL-16BR
Endmills for Machining Aluminum, Carrying HM90 APCR 1605... Inserts with Corner Radii Equal or Larger Than 5 mm

HP E90AN-07
Endmills with HELIPLUS HP ANKT 0702.. Inserts

HM90 EAL-15
Long Reach Endmills for Machining Aluminum, with HM90 AXCR 1505... Inserts

RM-BNT-3D/5D/8D (Shanks)
Shanks for BAYO T-REAM Interchangeable Head Reamers

HM90 EAL-22
Long Reach Endmills for Machining Aluminum, with HM90 APCR 2206... Inserts

H490 E90AX-17
90° Endmills Carrying H490 ANKX 17... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

ERW
Rough Profiling Endmills with Serrated or Regular Round Inserts

T490 LNK-13
Extended Flute Endmills with T490 LNMT/HT 13... Tangentially Clamped Inserts

H490 E90AX-12
90° Endmills Carrying H490 ANKX 12...Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

HTP-LN10
Side Plungers Carrying Tangentially Clamped Inserts with 4 Cutting Edges

T490 ELN-08
90° Face Mills Using Tangentially Clamped Inserts with 4 Helical, 8 mm Long Cutting Edges

T490 ELN-16
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, 16 mm Long Cutting Edges

T490 ELN-13
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, 12.5 mm Long Cutting Edges

T290 ELN-05
Endmills with Tangentially Clamped Inserts

T290 LNK-05
Extended Flute Endmills with T290 LNMT/HT 0502... Tangentially Clamped Inserts

HCM D10
Ball Nose Multifunction Endmills D=10 mm

H400 ER-12
Endmills Carrying Double-Sided Inserts with Four 6 mm Radius Cutting Edges

H490 E90AX-09
90° Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

HTP-LN06
Side Plungers Carrying Tangentially Clamped Inserts with 4 Cutting Edges

H400 ER-10
Endmills Carrying Double-Sided Inserts with Four 5 mm Radius Cutting Edges

P290 EPW
Long Reach Endmills

HM390 ETD-15
90° Endmills Carrying the HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges

HM390 ETP-10
90° Endmills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges