ISCAR Main Banner
  •  
  ISO TURN Cutting Conditions       
Chip Load Application :  Finishing Medium Roughing
Workpiece Material Groups :
Hardness HB
             		Workpiece Form :
Round Rod Pipe Interrupted
External / Internal
Turning Style :
Tool Structure :
Chipformer selection:
    
Insert :                   Corner Radius :
    CALCULATE RE-CALCULATE
Grade :
Recomendation Results :
Depth of cut (ap)   {mm}
Feed rate (f)   {mm/rev}
Cutting speed (Vc)   {m/min}
Spindle speed (n)   {rpm}
Tool life (T)   {min}
Time per pass (t)  {sec}
Metal removal rate (Q)  {cm3/min}
Net power (Pc)   {Kw}
Max profile height (Rt)   {μm}
Average roughness (Ra)   {μm}
Theoretical roughness (RMS)  {μm}

Elem.1  Elem.2  corner radius insert length incert ic   a  W  D
Ap min Ap max A=Ap*F KrKra Ka Kd KcoKm default grade: - recomend Vc
group grade : - default group Vc
Vc= (Elm1  /  (     T    *    A    ) +   Elm2 )  *  Kco  *   Kr   *   Kd *  Km *   Kra
Vc=( / ( * ) + ) * * * * * =
X = Current Vc = Vc * ( recomendedVc/groupVc );
factor * Vc (incase of 21-30)
Coolant thru :
YES NO
Machine Rigidity :
Good Average Poor
Clamping Rigidity :
Good Average Poor
W.P. Diameter (Dmax)  {mm}
Axial Cutting Length (lz)  {mm}