|
 |
 . |
 |
|
|
|
|
|
|
|
|
|
|
|
|
| 63 |
6.00 |
23.0 |
26.00 |
50.00 |
200.00 |
174.0 |
153.00 |
27.0 |
37.0 |
M5 |
0.12 |
|
| 4559305 |
 |
Not Available
3D Required |
 |
Balanced to G6.3/15,000 RPM.
|
| |
 |
4517188 |
WRENCH HYDRO HEX 4
(Optional, should be ordered separately) |
|
|
|
| |
 |
4559432 |
TEST BAR HYDRO 6
(Optional, should be ordered separately) |
|
|
|
| |
|
|
|
Chucking forces will be reduced by 25% if reduction sleeves are used.
A cooling tube must be used with coolant through HSK spindles (ordered separately).
Reduction sleeves are available for 12, 20, 25 and 32 mm bore diameters (must be ordered separately).
Terms of Use and Legal Disclaimer
|
;)