ISCAR Main Banner ISCAR Main Banner
  •  
 Milling      Family: ADKT 1505..R/L-HM Inserts with 2 Helical Cutting Edges and Various Corner Radii for General Use       Designation: ADKT 150516L-HM  
 
 
   Bottom Shouldering   Counter boring   Countersinking   Drill mill   Facing   Plunging & recessing   Ramp down  
Shouldering   Side slotting   Slanted shoulder. & chamfer.   Slotting  
r W F l ap S fz(min) fz(max)
  1.60   9.57   1.37   15.60   13.85   5.60   0.08   0.15

  Catalog No Grade Alternative Primary View
File (2D)		 Model (3D)
  5690908 IC328   Not Available
2D Required		 Not Available
3D Required
  L - Left-hand inserts are used only for special tools.
 

Inserts with corner radii larger than 0.8 mm should be used on ADK & SM tools only on the face of the cutter.





Terms of Use and Legal Disclaimer