|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 50 |
10.00 |
27.0 |
30.00 |
80.00 |
72.00 |
53.0 |
37.00 |
32.0 |
42.0 |
M8X1 |
M24 |
3.20 |
|
| 4559296 |
 |
 |
|
Balanced to G6.3/8,000 RPM.
|
| |
 |
4517188 |
WRENCH HYDRO HEX 4
(Optional, should be ordered separately) |
|
|
|
| |
 |
4559434 |
TEST BAR HYDRO 10
(Optional, should be ordered separately) |
|
|
|
| |
|
|
|
Chucking forces will be reduced by 25% if reduction sleeves are used.
Note: Reduction sleeves are available for 12, 20, 25 and 32 mm bore diameters (ordered separately).
The coolant passages in the B type flange are blocked with screws which can be removed when required.
Terms of Use and Legal Disclaimer
|
;)
