ISCAR Main Banner
 Threading - Internal thread milling                    Opciók: A leírás megtekintéséhez kattintson a képre  

GTIN ER menetfúró patron DIN típus. MTECS-ISO
GTIN ER menetfúró patron DIN típus.

Keményfém, ISO menetmaró. Belső menetekhez. MTEC-ISO
Keményfém, ISO menetmaró. Belső menetekhez.

Solid Carbide Internal Threading Endmills with Coolant Holes for ISO Thread Profile MTECB-ISO
Solid Carbide Internal Threading Endmills with Coolant Holes for ISO Thread Profile

Small Diameter, Short, Left-Hand, Solid Carbide, ISO Profile Threading Endmills for Hardened Steel MTECSH-ISO
Small Diameter, Short, Left-Hand, Solid Carbide, ISO Profile Threading Endmills for Hardened Steel

Solid Carbide Internal Threading Endmills with Coolant Holes Located in the Flutes MTECZ-ISO
Solid Carbide Internal Threading Endmills with Coolant Holes Located in the Flutes

Small Diameter, Short ,Solid Carbide, J-Type Profile Threading Endmills MTECS-MJ
Small Diameter, Short ,Solid Carbide, J-Type Profile Threading Endmills

60° Partial Solid Carbide Thread Mills with Coolant Holes Directed to the Cutting Edges, for Int. and Ext. Threads MTECI-A60
60° Partial Solid Carbide Thread Mills with Coolant Holes Directed to the Cutting Edges, for Int. and Ext. Threads

Solid Carbide Endmills with Internal Coolant Holes and a Reduced Diameter Neck, for Deep Internal ISO Profile Threading. MTECQ ISO
Solid Carbide Endmills with Internal Coolant Holes and a Reduced Diameter Neck, for Deep Internal ISO Profile Threading.

Solid Carbide Endmills with Internal Coolant Holes and a Reduced Diameter Neck, for Deep Internal UN Profile Threading. MTECQ UN
Solid Carbide Endmills with Internal Coolant Holes and a Reduced Diameter Neck, for Deep Internal UN Profile Threading.

Keményfém, BSW menetmaró. Ugyan az a szerszám külső és belső menetekhez. MTEC-W
Keményfém, BSW menetmaró. Ugyan az a szerszám külső és belső menetekhez.

Solid Carbide Internal or External Threading Endmills with Coolant Holes for BSP Thread Profile MTECB-W
Solid Carbide Internal or External Threading Endmills with Coolant Holes for BSP Thread Profile

Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes for Internal or External Whitworth Thread MTECZ-W
Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes for Internal or External Whitworth Thread

Keményfém, UN menetmaró. Belső menetekhez. MTEC-UN
Keményfém, UN menetmaró. Belső menetekhez.

Small Diameter, Short, Solid Carbide, UN Profile Threading Endmills for Hardened Steel MTECS-UN
Small Diameter, Short, Solid Carbide, UN Profile Threading Endmills for Hardened Steel

Solid Carbide Threading Endmills with Coolant Holes for Internal UN Thread Profile MTECB-UN
Solid Carbide Threading Endmills with Coolant Holes for Internal UN Thread Profile

Small Diameter, Short, Left-Hand, Solid Carbide, UN Profile Threading Endmills for Hardened Steel MTECSH-UN
Small Diameter, Short, Left-Hand, Solid Carbide, UN Profile Threading Endmills for Hardened Steel

Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes for Internal UN Thread Profile MTECZ-UN
Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes for Internal UN Thread Profile

Small Diameter, Short ,Solid Carbide, UNJ-Type Profile Threading Endmills MTECS-UNJ
Small Diameter, Short ,Solid Carbide, UNJ-Type Profile Threading Endmills

Keményfém, BSPT menetmaró. Ugyan az a szerszám külső és belsőmenetekhez. MTEC-BSPT
Keményfém, BSPT menetmaró. Ugyan az a szerszám külső és belsőmenetekhez.

Solid Carbide External or Internal Threading Endmills with Coolant Holes for BSPT Thread Profile MTECB-BSPT
Solid Carbide External or Internal Threading Endmills with Coolant Holes for BSPT Thread Profile

Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes for Internal or External BSPT Thread Profile MTECZ-BSPT
Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes for Internal or External BSPT Thread Profile

Keményfém, NPT menetmaró. Ugyan az a szerszám külső és belsőmenetekhez. MTEC-NPT
Keményfém, NPT menetmaró. Ugyan az a szerszám külső és belsőmenetekhez.

Solid Carbide Threading Endmills with Coolant Holes for External or Internal NPT Thread Profile MTECB-NPT
Solid Carbide Threading Endmills with Coolant Holes for External or Internal NPT Thread Profile

Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes for Internal or External NPT Thread Profile MTECZ-NPT
Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes for Internal or External NPT Thread Profile

Keményfém, NPTF menetmaró. Ugyan az a szerszám külső és belsőmenetekhez. MTEC-NPTF
Keményfém, NPTF menetmaró. Ugyan az a szerszám külső és belsőmenetekhez.

Solid Carbide Threading Endmills with Coolant Holes for External or Internal NPTF Thread Profile MTECB-NPTF
Solid Carbide Threading Endmills with Coolant Holes for External or Internal NPTF Thread Profile

Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes for Internal or External NPTF Thread Profile MTECZ-NPTF
Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes for Internal or External NPTF Thread Profile

Menetmaró száras kivitel. MTSR
Menetmaró száras kivitel.

Menetmaró, hosszú keményfém szárral. MTSR-C
Menetmaró, hosszú keményfém szárral.

Menetmaró, keményfém szárral egy pontos lapkához. MTSR-C-SINGLE
Menetmaró, keményfém szárral egy pontos lapkához.

Menetmaró, többlapkás. MTSR-Double Insert
Menetmaró, többlapkás.

Endmills for Helical Threading Inserts MTSRH (Endmills)
Endmills for Helical Threading Inserts

Shell Mills for Helical Threading Inserts MTSRH (Helical Shell Mill)
Shell Mills for Helical Threading Inserts

Menetmaró többlapkás kivitel. MTSR-MULTI (Shell Mill)
Menetmaró többlapkás kivitel.

Interchangeable Solid Carbide Milling Heads, for 55° Partial Profile Thread Milling MM TRD-W
Interchangeable Solid Carbide Milling Heads, for 55° Partial Profile Thread Milling

Interchangeable Solid Carbide Milling Heads, for 60° Partial Profile Thread Milling MM TRD-M
Interchangeable Solid Carbide Milling Heads, for 60° Partial Profile Thread Milling

Carbide Milling Heads with a Threaded Connection for Internal ISO Metric Thread MT-ISO-MM
Carbide Milling Heads with a Threaded Connection for Internal ISO Metric Thread

Carbide Milling Heads with a Threaded Connection for Internal UN Thread Profile MT-UN-MM
Carbide Milling Heads with a Threaded Connection for Internal UN Thread Profile