ISCAR Main Banner
  •  
 Milling - Side plunging                    OPTIONS: Position the cursor on the picture for a description Cutting Conditions Machine Power 

TANGPLUNGE-Shell mill plungers using tangentially clamped inserts with 4 cutting edges. HTP-R-LN16
TANGPLUNGE-Shell mill plungers using tangentially clamped inserts with 4 cutting edges.

TANGPLUNGE Side Plungers with Tangentially Clamped Inserts, with 4 cutting edges, diameter Range 25-40 mm HTP-LN10
TANGPLUNGE Side Plungers with Tangentially Clamped Inserts, with 4 cutting edges, diameter Range 25-40 mm

TANGPLUNGE Side Plungers with a FLEXFIT adaptation. for Tangentially Clamped Inserts, with 4 cutting edges. HTP-M-LN10
TANGPLUNGE Side Plungers with a FLEXFIT adaptation. for Tangentially Clamped Inserts, with 4 cutting edges.

TANGPLUNGE Shell Mill Plungers with Tangentially Clamped Inserts, with 4 cutting edges, Diameter Range 40-52 mm HTP-R-LN10
TANGPLUNGE Shell Mill Plungers with Tangentially Clamped Inserts, with 4 cutting edges, Diameter Range 40-52 mm

Side plunge milling cutters, used with XCMT 120408TR inserts. PLX
Side plunge milling cutters, used with XCMT 120408TR inserts.

Side plunge milling cutters with a FLEXFIT adaptation, used with XCMT 120408TR inserts. PLX-M
Side plunge milling cutters with a FLEXFIT adaptation, used with XCMT 120408TR inserts.

HELIDO UPFEED Face Mills for Fast Feed, Carrying Double-Sided Inserts with 6 Cutting Edges FF FWX-08
HELIDO UPFEED Face Mills for Fast Feed, Carrying Double-Sided Inserts with 6 Cutting Edges

Toroidal bull nose endmills with CNHT...and ENHT...inserts. E93CN
Toroidal bull nose endmills with CNHT...and ENHT...inserts.

Toroidal bull nose endmills with MULTI-MASTER adaptation using CNHT and ENHT inserts. E93CN-MMT
Toroidal bull nose endmills with MULTI-MASTER adaptation using CNHT and ENHT inserts.

Toroidal bull nose endmills with FLEXFIT adaptation, using CNHT...and ENHT... inserts. E93CN-M
Toroidal bull nose endmills with FLEXFIT adaptation, using CNHT...and ENHT... inserts.

Toroidal bull nose face mills using ENHT... inserts. Used for undercutting and finishing cut mainly on steep walls. F93CN
Toroidal bull nose face mills using ENHT... inserts. Used for undercutting and finishing cut mainly on steep walls.

HELIDO 90° Face Mills Using the H490 ANKX 17.. Double-Sided, Rectan gular Inserts with 4 Helical Cutting Edges H490 F90AX-17
HELIDO 90° Face Mills Using the H490 ANKX 17.. Double-Sided, Rectan gular Inserts with 4 Helical Cutting Edges

HELIDO 90° endmills using the H490 ANKX 17...double-sided rectangular inserts with 4 helical cutting edges. H490 E90AX-17
HELIDO 90° endmills using the H490 ANKX 17...double-sided rectangular inserts with 4 helical cutting edges.

90° Face Mills Using the H490 ANKX 12.. Double-Sided, Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-12
90° Face Mills Using the H490 ANKX 12.. Double-Sided, Rectangular Inserts with 4 Helical Cutting Edges

HELIDO 90° endmills using the H490 ANKX 12...double-sided rectangular inserts with 4 helical cutting edges. H490 E90AX-12
HELIDO 90° endmills using the H490 ANKX 12...double-sided rectangular inserts with 4 helical cutting edges.