HM90 E90AD-CF-15
Endmills with a CLICKFIT adaptation for HM90 ADKT-1505PDR HELI2000 inserts.
|
|
HP E90AT-19
HELIPLUS, 90° endmills with CLICKFIT adaptation carrying HP AD.. 1906.. inserts.
|
|
HP E90AT-CF-19
HELIPLUS, 90° endmills with CLICKFIT adaptation carrying HP AD.. 1906.. inserts.
|
|
HP E90AT-22
HELIPLUS 90° endmills using HP AD.. 2207.. 22 mm cutting edge inserts.
|
|
HP E90AT-CF-22
HELIPLUS 90° endmills with a CLICKFIT adaptation using HP AD.. 2207.. 22 mm cutting edge inserts.
|
|
FF FWX-08
HELIDO UPFEED Face Mills for Fast Feed, Carrying Double-Sided Inserts with 6 Cutting Edges
|
|
ER
Endmills carrying round inserts for profiling and milling of round corners.
|
|
EC-E4L-CF
4 Flute, 38° Helix with Variable Pitch for Chatter Free Roughing and Finishing Operations
|
|
EC-E5L-CF
5 Flute, 38° Helix with Variable Pitch for Chatter Free Roughing and Finishing Operations
|
|
EFS-B44
FINISHRED, A combination of roughing and finishing solid carbide endmill in a single tool.
|
|
ECR-B-S
Solid carbide roughing endmills, 4-7 flute rougher, 45° helix-short length (1xD ).
|
|
ECR-B-M/ECR-B-M...R
Solid carbide medium length 2xD roughing endmills with 45° helix angle, used for high stock removal rates.
|
|
ECR-B-L
Solid carbide roughing end mills, 4-7 flute, 45h helix, long reach (3xD), used for high stock removal rates.
|
|
ECR-B-X
Solid carbide extra long 4xD roughing endmills 4-5 flute with 45° helix angle, used for high stock removal rates
|
|
ECR-B-MF
Solid carbide roughing endmills, 4,6 flute rougher, 45° helix, medium length, for materials up to 65HRc.
|
|
ECR-T-M
Solid carbide, 4 and 6 flute with 20° helix, medium length roughing endmills. Used for high stock removal rates.
|
|
ERF-A/E-3,4,6
Solid carbide roughing endmills, 3,4,6 flutes, 40° helix.
|
|
ECR-B3-R
Solid carbide roughing end mills, 3 flute 45° Helix, used for high stock removal rates on aluminum.
|
|
ERC-E-3
Solid carbide roughing endmills, 3 flute, 38° helix.
|
|
ECS/ECCS-E-3
Short solid carbide endmills, center cutting with 3, 38° flute helix.
|
|
EC-A-2
Solid carbide medium length endmills, 2 flutes, 30 and 45° helix.
|
|
ECC-A-2
Solid carbide medium length endmills, 2 flutes, 30° helix, center cutting with chamfered corners.
|
|
ECC-A-4
Solid carbide chamfered endmills, 4 flute, 30° helix, center cutting.
|
|
EC-E-3
Solid carbide endmills center cutting, 3 flute, 38° helix.
|
|
ECC-E-3
Solid carbide endmills, chamfered, center cutting, 3 flute,38° helix.
|
|
ECU-E-3
Solid carbide short endmills, center cutting, 3 flutes 38° helix.
|
|
ECU-E-3-R
3 flute undersized slot drill, 38° helix with assorted radii according to DIN 6885.
|
|
EC-B-3
Solid carbide endmills, center cutting, 3 flute, 45° helix.
|
|
EC-B-3...R
3 flute, 45° helix, medium length solid carbide endmills with different corner radii.
|
|
EC-B-4
Solid carbide medium length end-mills, center cutting, 4 flute, 45° helix.
|
|
EC-B-4...R
4 flute, 45° helix, medium length solid carbide endmills with different corner radii.
|
|
EC-A-4
Solid carbide endmills center cutting, 4 flute, 30° helix.
|
|
|
EC-A2 (Medium Length)
Solid carbide endmills, center cutting, 2 flutes, medium length, 30° helix. Used for hard materials up to 65HRc.
|
|
EC-A4
Solid carbide endmills, 4 flutes 30° helix, medium length, center cutting, Used for hard materials up to 65HRc.
|
|
EC-B4-R
4 flute, corner radius solid carbide, extra-long endmills, 45° Helix, used on hardened steel.
|
|
ECA-B-3
Solid carbide endmills for aluminum, center cutting, 3 flutes, 45° helix.
|
|
ECA-F-2
Solid carbide endmills, center cutting, 2 flute 55° helix. Special design for aluminum.
|
|
MM EC-3
3 Flute, 45° HelixM, Interchangeable Solid Carbide Endmill Heads
|
|
MM EC-4
4 Flute, Interchangeable Solid Carbide Endmill Heads, 30°, 45° Helix, Various Corner Radii
|
|
MM EFS
FINISHRED, A combination of roughing and finishing interchangeable solid carbide endmill head.
|
|
MM EC-CF
MULTI-MASTER 4 Flute, 38° Helix with Variable Pitch for Chatter Free Roughing and Finishing Operations
|
|
MM ECU
MULTI-MASTER undersized for keyways (DIN 6885), interchangeable solid carbide heads.
|
|
MM ERS
MULTI-MASTER interchangeable solid carbide, rough milling heads, used for high metal removal applications.
|
|
MM HC
MULTI-MASTER interchangeable solid carbide, 2 10° flute, economical type, slot drill endmill heads.
|
|
MM HT
MULTI-MASTER interchangeable, torodial 2 flute, solid carbide heads.
|
|
MM ETR
MULTI-MASTER toroidal interchangeable, 6 flute solid carbide heads.
|
|
MM FF
MULTI-MASTER interchangeable 2 flute, FEEDMILL solid carbide head. Used for very high feed at small DOC milling.
|
|
MM EA
MULTI-MASTER interchangeable solid carbide milling heads, used for machining aluminum.
|
|
|
