HM90 E90A-10
HELI2000 endmills for HM90 APKT 1003PDR inserts.
|
|
HM90 E90A-MM-10
90° endmills with MULTI-MASTER Adaptation, carrying HM90 APKT 1003... inserts.
|
|
HM90 E90A-M-10
90° endmills with a FLEXFIT adaptation for HM90 APKT 1003... HELI2000 inserts.
|
|
|
|
|
HM90 E90AD-CF-15
Endmills with a CLICKFIT adaptation for HM90 ADKT-1505PDR HELI2000 inserts.
|
|
HM90 E90AD-M-15
Endmills with a FLEXFIT adaptation for HM90 ADKT-1505PDR HELI2000 inserts.
|
|
HP F90AN-07
HELIPLUS 90° facemills with HP ANKT 0702.. inserts.
|
|
HP F90AT-19
HELIPLUS 90° facemills with HP AD.. 1906.. inserts.
|
|
|
|
3M E90AX
Endmills for the MILL2000 3M AXKT 1304.../2006....inserts.
|
|
3M E90AX-CF
Endmills with a CLICKFIT adaptation for 3M AXKT MILL2000 inserts.
|
|
E90XC
Drilling endmills using S/XOMT inserts; 12-20 mm dia.
|
|
H490 F90AX-17
HELIDO 90° Face Mills Using the H490 ANKX 17.. Double-Sided, Rectan gular Inserts with 4 Helical Cutting Edges
|
|
H490 E90AX-17
HELIDO 90° endmills using the H490 ANKX 17...double-sided rectangular inserts with 4 helical cutting edges.
|
|
ECR-B-S
Solid carbide roughing endmills, 4-7 flute rougher, 45° helix-short length (1xD ).
|
|
ECR-B-M/ECR-B-M...R
Solid carbide medium length 2xD roughing endmills with 45° helix angle, used for high stock removal rates.
|
|
ECR-B-L
Solid carbide roughing end mills, 4-7 flute, 45h helix, long reach (3xD), used for high stock removal rates.
|
|
ECR-B-X
Solid carbide extra long 4xD roughing endmills 4-5 flute with 45° helix angle, used for high stock removal rates
|
|
ECR-B-MF
Solid carbide roughing endmills, 4,6 flute rougher, 45° helix, medium length, for materials up to 65HRc.
|
|
ECR-T-M
Solid carbide, 4 and 6 flute with 20° helix, medium length roughing endmills. Used for high stock removal rates.
|
|
ERF-A/E-3,4,6
Solid carbide roughing endmills, 3,4,6 flutes, 40° helix.
|
|
ECR-B3-R
Solid carbide roughing end mills, 3 flute 45° Helix, used for high stock removal rates on aluminum.
|
|
|
