MULTI-WEDGE Lock External Toolholders for 80° Negative Rhombic, Trigon and Square Inserts
|
|
R-Clamp Toolholders with 95° Lead Angle for 80° Negative Rhombic Inserts
|
|
Lever Lock Toolholders for 80° Negative Rhombic Inserts
|
|
Lever Lock Toolholders for 80° Negative Rhombic Inserts with Channels for High Pressure Coolant
|
|
Lever Lock Toolholders for CNMX-HT/MW HELITURNLD 80° Rhombic Inserts with Channels for High Pressure Coolant
|
|
Lever Lock Toolholders for CNMX-HTW HELITURNLD 80° Rhombic Inserts
|
|
Pin and Clamp Toolholders for 80° Negative Rhombic Inserts
|
|
95° Lead Angle Toolholders for Negative CNGX 80° Rhombic Ceramic Dimpled Inserts
|
|
Clamp Lock Toolholders for Ceramic 80° Rhombic Negative Inserts
|
|
Screw Lock Toolholders for 80° Diamond Inserts with 7° Clearance Angle
|
|
Side Lever Lock Tools for 80° Positive Rhombic Inserts for Swiss Automatic Machines
|
|
SUXCR-CM-PAD
Screw Lock Adapter for Four Different 7° Clearance GeometriEs
|
|
Screw Lock Toolholders for Four Different 7° Clearance Geometries
|
|
PCLNR/L-CA
95° Lead Angle Exchangeable Cartridges for 80° Negative Diamond Inserts
|
|
HSK A63WH-MUMNN-MW
MULTI-WEDGE Lock Holder for Negative, 80° Rhombic, Trigon and Square Inserts with an HSK A63WH Adaptation
|
|
HSK A63WH-MULNR/L-MW
MULTI-WEDGE, Toolholders with HSK Taper Shanks for 80° Rhombic, Trigon and Square Inserts
|
|
|
C#-MULNR/L-MW
MULTI-WEDGE, Toolholders for 80° Rhombic, Trigon and Square Inserts with CAMFIX Exchangeable, Tapered Shanks
|
|
C#-MCLNR/L
95° Lead Angle, Toolholders, for Negative, 80° Inserts with CAMFIX Exchangeable, Tapered Shanks
|
|
C#-SCLCR/L
Screw Lock Toolholders with CAMFIX Exchangeable, Tapered Shanks for 80° Rhombic Inserts with 7° Clearance Angle
|
|
C#-T-PCM12XPDM15
Lever Lock Double-Function Tool with CAMFIX Shank for CNMX 1207.. and DNMG 1506.. Inserts for Multi-Task Machines
|
|
C#-PCLNR/L-12-JHP
Lever Lock Toolholders for 80° Negative Rhombic Inserts and CAMFIX Heads with Channels for High Pressure Coolant
|
|
C#-PCLNR/L-X
Lever Lock Toolholders for CNMX-HTW, 80° Negative Rhombic Inserts with ISO 26623-1 Exchangeable, Tapered Shanks
|
|
C#-PCLNR/L-12X-JHP
Lever Lock Tools for CNMX, 80° Negative Rhombic Inserts and CAMFIX Heads with Channels for High Pressure Coolant
|
|
IM-MULNR/L-MW
MULTI-WEDGE, Toolholders with ISO 26622-1(*) Tapered Shank for 80° Rhombic, Trigon and Square Inserts
|
|
IM-MCLNR/L
95° Lead Angle, Toolholders, for Negative, 80° Inserts with ISO 26622-1(*) Tapered Shank
|
|
IM-SCLCR/L
Screw Lock Toolholders with ISO 26622-1(*) Tapered Shanks for 80° Rhombic Inserts with 7° Clearance Angle
|
|
|
