HGHR/L-3
Integral holders for face grooving and turning Dmin. 12 mm.
|
|
MGCH
Solid Carbide Bars for Internal Grooving, Turning and Threading Dmin 8mm
|
|
MGCH-C
Face Machining Solid Carbide Bars for Dmin 12 - Dmax 19mm Penetration Range, Using GFQR Inserts
|
|
HFPAD-3
MODULAR GRIP, adapter for face machining. Dmin 25mm Dmax 400mm.
|
|
HFPAD-4
MODULAR-GRIP adapter for face grooving and turning in the 25-800 mm diameter range.
|
|
HFPAD-5
MODULAR-GRIP adapter for face grooving and turning in the 25-800 mm diameter range.
|
|
HFPAD-6
MODULAR-GRIP adapter for face grooving and turning Dmin 25 mm.
|
|
HFHR/L-3T
Integral holders for facing, Dmin. 25mm.
|
|
HFHR/L-4T
Integral holders for facing, Dmin. 25mm.
|
|
HFHR/L-5T
Integral holders for facing, Dmin. 25mm.
|
|
HFHR/L-6T
Integral holders for facing, Dmin. 26mm.
|
|
HFFR/L-T
Blades for face machining Dmin 48mm.
|
|
HGAER/L-3
Adapters for external facing, along shaft. Dmin.12 mm.
|
|
HFAER/L-4T
Adapters for external facing along shaft. Dmin. 12 mm.
|
|
HFAER/L-5,6T
Adapters for external facing along shaft Dmin 12 mm.
|
|
GHFG-R/L-8
Holders for face grooving and turning Dmin. 50 mm. Can machine along a shaft.
|
|
GHFGR/L-8
Holders for face grooving and turning Dmin. 80 mm.
|
|
GAFG-R/L-8
Adapters for face machining, Dmin 80 mm.
|
|
CGFG 51-P8
Blades for face machining, carrying 8 mm inserts, Dmin 180 mm.
|
|
SGFFR/L
SELF-GRIP, face-grooving integral shank tools.
|
|
SGFFA
Self-Grip, face-grooving adapter blades used on the standard tool blocks.
|
|
SGFFH
SELF-GRIP, face-grooving blades.
|
|
HFHR/L-M
Integral holders for shallow facing, Dmin. 20mm.
|
|
HFHPR/L-M
Perpendicular holders for facing, Dmin. 20mm.
|
|
GHMR/L
External Machining Holders for Shallow Grooving
|
|
GHMPR/L
Perpendicular External Holders for Shallow Grooving
|
|
GAM
External Machining Adapters for Partially Supported CUT-GRIP Inserts
|
|
HGAIR/L-3
Adapters for internal facing. Dmin 12 mm.
|
|
HFAIR/L-4T
Adapters for internal facing. Dmin 12 mm.
|
|
|
HFIR/L-MC
Boring bars for facing, Dmin. 20mm.
|
|
C-HFIR/L-MC
Tools for internal groonig and turning compatible with COROMANT CAPTO® system.
|
|
CR HFIR/L-M
Cartridges for face grooving and face turning Dmin. 60mm.
|
|
KM-HFIR/L-MC
Tools for internal groonig and turning with KM® adaptation.
|
|
|
