ISCAR Main Banner
 Milling - Slanted shoulder. & chamfer.                    OPTIONS: Position the cursor on the picture for a description  

45° Chamfering Endmills Using the X/Q/SOMT 06 Inserts E45X
45° Chamfering Endmills Using the X/Q/SOMT 06 Inserts

30° Chamfering Endmills E30
30° Chamfering Endmills

45° Chamfering Endmills E45
45° Chamfering Endmills

60° Chamfering Endmills E60
60° Chamfering Endmills

Multi-Functional Endmills for Four Insert Shapes ECM
Multi-Functional Endmills for Four Insert Shapes

65° Face Mills Using Inserts with 8 Cutting Edges S865 FSN-13
65° Face Mills Using Inserts with 8 Cutting Edges

Face Mills for Four Different Insert Contours FCM
Face Mills for Four Different Insert Contours

45° Endmills, Using Octagonal or Round Inserts E45KT
45° Endmills, Using Octagonal or Round Inserts

45° Face Mills, Using Octagonal or Round Inserts F45KT
45° Face Mills, Using Octagonal or Round Inserts

Face Mills Using Octagonal, Round and High Feed, Segmented Radii Inserts HOF
Face Mills Using Octagonal, Round and High Feed, Segmented Radii Inserts

45° Face Mills, Using Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges F45NM
45° Face Mills, Using Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges

45° Face Mills, Using Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges F45WG
45° Face Mills, Using Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges

45° Endmills Using SEKN/R 12... Inserts F45E (endmill)
45° Endmills Using SEKN/R 12... Inserts

45° Face mills Using SEKN/R 12... Inserts F45E
45° Face mills Using SEKN/R 12... Inserts

45°, Screw Clamped Endmills Using SEK/MT 12... Inserts F45ST (endmill)
45°, Screw Clamped Endmills Using SEK/MT 12... Inserts

45°, Screw Clamped Face Mills Using SEK/MT 12... Inserts F45ST
45°, Screw Clamped Face Mills Using SEK/MT 12... Inserts

45° Face Mills Using Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges SOF45 8/16
45° Face Mills Using Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges

45° EndMills Using Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges SOE45 8/16
45° EndMills Using Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges

HELIDO 45° endmills using inserts with 8 helical right-hand cutting edges S845 E45SX-16
HELIDO 45° endmills using inserts with 8 helical right-hand cutting edges

45° Face Mills Carrying Inserts with 8 Helical, Right-Hand Cutting Edges, Providing a Very Economical Solution S845 F45SX-16
45° Face Mills Carrying Inserts with 8 Helical, Right-Hand Cutting Edges, Providing a Very Economical Solution

45° Face Mills Using LN..1506... Tangentially Clamped Inserts F45LN-N15
45° Face Mills Using LN..1506... Tangentially Clamped Inserts

45° Face Mills Using HM90 AD..-1505... Inserts F45AD
45° Face Mills Using HM90 AD..-1505... Inserts

Heavy Duty, 45° Endmills Using 3M AXKT 2006... Inserts 3M E45AX-20
Heavy Duty, 45° Endmills Using 3M AXKT 2006... Inserts

Heavy Duty, 45° Face Mills Using 3M AXKT 2006... Inserts 3M F45AX-20
Heavy Duty, 45° Face Mills Using 3M AXKT 2006... Inserts

2 Flute, Chamfering, Countersinking and Spot Drilling Interchangeable Solid Carbide Heads MM HCD
2 Flute, Chamfering, Countersinking and Spot Drilling Interchangeable Solid Carbide Heads

Chamfering and Countersinking Interchangeable Solid Carbide Heads MM ECF
Chamfering and Countersinking Interchangeable Solid Carbide Heads

Interchangeable 2 flute, solid carbide chamfering head with a MULTI-MASTER adaptation. MM HCF
Interchangeable 2 flute, solid carbide chamfering head with a MULTI-MASTER adaptation.

Torodial, 2 Flute, Interchangeable Solid Carbide Heads MM HT
Torodial, 2 Flute, Interchangeable Solid Carbide Heads

2 Flute, Chip Splitting, Toroidal, Solid Carbide Milling Heads MM HT-NCSR
2 Flute, Chip Splitting, Toroidal, Solid Carbide Milling Heads

2 Flute, Toroidal, Solid Carbide Milling Heads with a Side Tangential Wiper MM HT-NWFR
2 Flute, Toroidal, Solid Carbide Milling Heads with a Side Tangential Wiper

Torodial, 6 Flute, Interchangeable Solid Carbide Heads MM ETR
Torodial, 6 Flute, Interchangeable Solid Carbide Heads

2 Flute, FEEDMILL, Interchangeable Solid Carbide Heads for Milling at Very High Feed and Small D.O.C. MM FF
2 Flute, FEEDMILL, Interchangeable Solid Carbide Heads for Milling at Very High Feed and Small D.O.C.

4 Flute, Solid Carbide Heads for Milling at Very High Feed and Small D.O.C. MM EFF
4 Flute, Solid Carbide Heads for Milling at Very High Feed and Small D.O.C.

2 Flute, 30° Tapered Helix, Solid Carbide Endmills for Hardened Steel ECT-A2
2 Flute, 30° Tapered Helix, Solid Carbide Endmills for Hardened Steel

Multi-Functional Endmills for Four Insert Shapes with a CLICKFIT Adaptation ECM-CF
Multi-Functional Endmills for Four Insert Shapes with a CLICKFIT Adaptation

4 Flute, 25° Tapered Helix, Solid Carbide Endmills for Rib Processing on Hardened Steel ECT-T4
4 Flute, 25° Tapered Helix, Solid Carbide Endmills for Rib Processing on Hardened Steel