Full Width Slotting Cutters, Flanged Type with Round and Octagonal Inserts
|
|
45° Endmills Using Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges
|
|
45° Extra Fine Pitch Face Mills with Wedge Clamped Inserts
|
|
45° Face Mills, Using Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges
|
|
High Feed Mill Cutter, Using Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges
|
|
45° Face Mills Carrying Economical Inserts with 8 Helical Right-Hand Cutting Edges
|
|
HOF
Face Mills Using Octagonal, Round and High Feed Segmented Radius Inserts
|
|
F45NM
45° Face Mills, Using Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges
|
|
F45KT
45° Face Mills, Using Octagonal or Round Inserts
|
|
45° Screw Clamped Face Mills with SEK/MT 12... Inserts
|
|
F45LN-N15
45° Face Mills with LN..1506... Tangentially Clamped Inserts
|
|
F45WG
45° Face Mills, Using Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges
|
|
Face Mills for Four Different Insert Contours
|
|
45° Face Mills with HM90 AD..-1505... Inserts
|
|
90° Face Mills Using the H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
|
|
Heavy Duty 45° Face Mills with 3M AXKT 2006... Inserts
|
|
Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges
|
|
Moderate Feed Face Mills, Carrying Double-Sided Inserts with 6 Cutting Edges
|
|
High Feed Shell Mill Carrying Tangentially Clamped Inserts with 4 Cutting Edges
|
|
Face Mills Carrying Double-Sided Inserts with Four 5 mm Radius Cutting Edges
|
|
Face Mills Carrying Double-Sided Inserts with Four 6 mm Radius Cutting Edges
|
|
Face Mills Carrying Double-Sided Inserts with Four 8 mm Radius Cutting Edges
|
|
F45WX-08
43° Face Mills with 6 Cutting Edged Double-Sided Inserts
|
|
HELIDO UPFEED Face Mills for Fast Feed, Carrying Double-Sided Inserts with 6 Cutting Edges
|
|
FF FW
Fast Feed Face Mills
|
|
65° Face Mills Carrying Inserts with 8 Cutting Edges
|
|
88° Face Mills Using Inserts with 8 Cutting Edges
|
|
65° Face Mills Using Tangentially Clamped Inserts with 4 Helical, 22 mm Long Cutting Edges
|
|
45° Face Mills with SEKN/R 12... Inserts
|
|
75° Face Mills with AP..-1003... Inserts
|
|
75° Face Mills with HM90 AD..-1505... Inserts
|
|
75° Face Mills with SPKN/SPKR/SPUN 1203.. Inserts
|
|
Heavy Duty, 75° Face Mills with 3M AXKT 1304... Inserts
|
|
Heavy Duty, 75° Face Mills with 3M AXKT 2006... Inserts
|
|
90° Face Mills Using H490 ANKX 12.. Double-Sided, Rectangular Inserts with 4 Helical Cutting Edges
|
|
90° Face Mills Using H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
|
|
90° Face Mills with T290 LNMT 1004... Tangentially Clamped Inserts
|
|
90° Face Mills with Tangentially Clamped Inserts
|
|
90° Face Mills Using Tangentially Clamped Inserts with 4 Helical, 13 mm Long Cutting Edges
|
|
90° Face Mills with T290 LNMT 1506... Tangentially Clamped Inserts
|
|
90° Face Mills Using Tangentially Clamped Inserts with 4 Helical, 16 mm Long Cutting Edges
|
|
90° Face Mills with LN..1106... Tangentially Clamped Inserts
|
|
Adjustable 90° Face Mills (Used Mainly For PCD/CBN Inserts)
|
|
F90LN-N15
90° Face Mills with LN..1506... Tangentially Clamped Inserts
|
|
90° Face Mills with HM90 APKT 1003... Inserts
|
|
|
|
Adjustable Face Mills (used mainly for PCD/CBN inserts)
|
|
F90SP-10
90° Face Mills with S/X/QPMT 1004... Inserts
|
|
F90SD-12
90° Face Mills with S/QDM. 12... Inserts (Japanese standard)
|
|
90° Face Mills Using SDMT 1606... Inserts
|
|
90° Face Mills with HP ANKT 0702.. Inserts
|
|
90° Face Mills with HP AD.. 1906... Long Edged Inserts
|
|
HP F90AT-22
90° Face Mills with HP AD.. 2207... Long Edged Inserts
|
|
3M F90AX-13
Heavy Duty 90° Face Mills with 3M AXKT 1304.. Inserts
|
|
3M F90AX-20
Heavy Duty 90° Face Mills with 3M AXKT 2006.. Inserts
|
|
90° Face Mills with TPKN/R Inserts
|
|
Face Mills for Machining Aluminum, with HM90 APCR 1605... Inserts
|
|
Face Mills for Machining Aluminum, Carrying Inserts with Corner Radii Equal or Larger Than 5 mm
|
|
Face Mills for Machining Aluminum, with HM90 APCR 2206... Inserts
|
|
Face Mills with HM90 AXCR 1505.. Inserts for Machining Aluminum
|
|
Face Mills with Adjustable Cartridges for High Speed Machining of Aluminum Alloys, Cast Iron and Carbon Fiber
|
|
|