SDN-LN08
Disk type Grooving and slitting cutters.
|
|
|
|
SDN-LN12
Full slot, disk type slotting cutters using LNET 12 tangentially mounted inserts.
|
|
SDN-CALN12
Full width slotting cutter, disk type, with cartridges carrying tangentially mounted inserts.
|
|
FDN-LN12
Full Slot Cutters Using LNET 12... Tangentially Mounted Inserts
|
|
FDN-CALN12
Full slot, adjustable slotting cutters with cartridges using LNET 12 inserts, 6.0-10.5 mm width range.
|
|
SDN-CALN11
Full width slotting cutter, disk type, with cartridges carrying tangentially mounted inserts.
|
|
FDN-CALN11
Full slot, adjustable slotting cutters with cartridges using LNMT 1106 inserts,
|
|
SDN-CALN15
Full width slotting cutter, disk type, with cartridges carrying tangentially mounted LN.. 1506.. inserts.
|
|
FDN-CALN15
Full slot, adjustable slotting cutters with cartridges using LNMT 1506PNTN-HT inserts, 18.9-25.6 mm width range.
|
|
ETS
"T-slot" endmills.
|
|
SDN
Full width, disk type slotting cutters.
|
|
FDN
Full width, flanged-type slotting cutters.
|
|
FDN-CM
Full width slotting cutters flanged type, using round and octagonal inserts.
|
|
FDN-CF4
Full width slotting cutters flanged type with a CLICKFIT adaptation.
|
|
FSB
Bottom-side, flanged-type slotting cutters.
|
|
GM
Endmills for groove milling, using GMP & GIPI/GIFI inserts.
|
|
GM-DG
Slitting cutters using DO-GRIP self clamping system.
|
|
SGSF
Slitting cutters using SELF-GRIP inserts.
|
|
TGSF
Slitting cutters using TANG-GRIP inserts.
|
|
MM TS-N
MULTI-MASTER interchangeable solid carbide T-Slot milling heads with chamfered corners.
|
|
MM TS-H
Interchangeable solid carbide T-Slot with different corner radii milling heads and a MULTI-MASTER threaded adaptation.
|
|
MM GRIT-K/P-45A
MULTI-MASTER interchangeable solid carbide heads for 45° chamfering.
|
|
MM GRIT-22K/P,28K
MULTI-MASTER interchangeable solid carbide small diameter, groove milling heads.
|
|
MM GRIT-16K/18P
MULTI-MASTER interchangeable solid carbide small diameter, groove milling heads.
|
|
|
