ISCAR Main Banner
 Milling - Plunging & recessing                    OPTIONS: Position the cursor on the picture for a description Cutting Conditions Machine Power 

HELIDO UPFEED Face Mills for Fast Feed, Carrying Double-Sided Inserts with 6 Cutting Edges FF FWX-08
HELIDO UPFEED Face Mills for Fast Feed, Carrying Double-Sided Inserts with 6 Cutting Edges

SHREDMILL-Rough Profiling Tools. ERW
SHREDMILL-Rough Profiling Tools.

SHREDMILL- Rough Profiling Tools with a FLEXFIT adaptation. ERW-M
SHREDMILL- Rough Profiling Tools with a FLEXFIT adaptation.

SHREDMILL-Rough Profiling Tools. FRW
SHREDMILL-Rough Profiling Tools.

ROUNDMILL face mills carrying round inserts for profiling and milling of round corners. FR
ROUNDMILL face mills carrying round inserts for profiling and milling of round corners.

Toroidal bull nose endmills with CNHT...and ENHT...inserts. E93CN
Toroidal bull nose endmills with CNHT...and ENHT...inserts.

Toroidal bull nose endmills with MULTI-MASTER adaptation using CNHT  and ENHT  inserts. E93CN-MMT
Toroidal bull nose endmills with MULTI-MASTER adaptation using CNHT and ENHT inserts.

Toroidal bull nose endmills with FLEXFIT adaptation, using CNHT...and ENHT... inserts. E93CN-M
Toroidal bull nose endmills with FLEXFIT adaptation, using CNHT...and ENHT... inserts.

Toroidal bull nose face mills using ENHT... inserts. Used for undercutting and finishing cut mainly on steep walls. F93CN
Toroidal bull nose face mills using ENHT... inserts. Used for undercutting and finishing cut mainly on steep walls.

45n Eand mills using SEKN/R-42.. inserts F45E (endmill)
45n Eand mills using SEKN/R-42.. inserts

Face mills using HM90 APCR 1505.., HELIALU inserts for machining  aluminum. HM90 FAL-15
Face mills using HM90 APCR 1505.., HELIALU inserts for machining aluminum.

Long reach endmills for machining aluminum using HM90 AXCR 1505 inserts. HM90 EAL-15
Long reach endmills for machining aluminum using HM90 AXCR 1505 inserts.

Endmills for aluminum with integral ER adaptation. Available for HM90  AXCR 1505 or HM90 APCR 1605 inserts. HM90 EAL-ER
Endmills for aluminum with integral ER adaptation. Available for HM90 AXCR 1505 or HM90 APCR 1605 inserts.

Endmills with integral HSK adaptation using HM90 AXCR 1505 inserts for machining aluminum. HM90 EAL-HSK63A-15
Endmills with integral HSK adaptation using HM90 AXCR 1505 inserts for machining aluminum.

Long reach endmills for machining aluminum, using HM90 APCR 1605 inserts. HM90 EAL-16
Long reach endmills for machining aluminum, using HM90 APCR 1605 inserts.

Endmills for aluminum with integral CLICKFIT adaptation, using HM90 APCR 1605..R-P inserts. HM90 EAL-CF4-16
Endmills for aluminum with integral CLICKFIT adaptation, using HM90 APCR 1605..R-P inserts.

Endmills for machining aluminum using HM90 APCR 1605..R-P inserts with corner radii equal or larger than 5 mm. HM90 EAL-16BR
Endmills for machining aluminum using HM90 APCR 1605..R-P inserts with corner radii equal or larger than 5 mm.

Endmills with integral HSK adaptation for machining aluminum, using HM90 APCR 1605.. inserts. HM90 EAL-HSK63A-16
Endmills with integral HSK adaptation for machining aluminum, using HM90 APCR 1605.. inserts.

Face mills using HM90 APCR 1605.., HELIALU inserts for machining  aluminum. HM90 FAL-16
Face mills using HM90 APCR 1605.., HELIALU inserts for machining aluminum.

ols.  Z!m should not be used on  BR  tools.serts with cornerZ!adii equal or larger than 5 mm. HM90 FAL-16BR
ols. Z!m should not be used on BR tools.serts with cornerZ!adii equal or larger than 5 mm.

Endmills for machining aluminum carrying HM90 APCR 2206.. inserts. HM90 EAL-22
Endmills for machining aluminum carrying HM90 APCR 2206.. inserts.

Solid carbide roughing endmills, 4-7 flute rougher, 45° helix-short length (1xD  ). ECR-B-S
Solid carbide roughing endmills, 4-7 flute rougher, 45° helix-short length (1xD ).

Solid carbide roughing end mills, 4-7 flute, 45h helix, long reach (3xD), used for high stock removal rates. ECR-B-L
Solid carbide roughing end mills, 4-7 flute, 45h helix, long reach (3xD), used for high stock removal rates.

Solid carbide extra long 4xD roughing endmills 4-5 flute with 45° helix angle, used for high stock removal rates ECR-B-X
Solid carbide extra long 4xD roughing endmills 4-5 flute with 45° helix angle, used for high stock removal rates

MULTI-MASTER interchangeable 2 flute, FEEDMILL solid carbide head. Used for very high feed at small DOC milling. MM FF
MULTI-MASTER interchangeable 2 flute, FEEDMILL solid carbide head. Used for very high feed at small DOC milling.

3 Flute, 45° HelixM, Interchangeable Solid Carbide Endmill Heads MM EC-3
3 Flute, 45° HelixM, Interchangeable Solid Carbide Endmill Heads

4 Flute, Interchangeable Solid Carbide Endmill Heads, 30°, 45° Helix, Various Corner Radii MM EC-4
4 Flute, Interchangeable Solid Carbide Endmill Heads, 30°, 45° Helix, Various Corner Radii

MULTI-MASTER interchangeable solid carbide, 2 10° flute, economical type, slot drill endmill heads. MM HC
MULTI-MASTER interchangeable solid carbide, 2 10° flute, economical type, slot drill endmill heads.

MULTI-MASTER undersized for keyways (DIN 6885), interchangeable solid carbide heads. MM ECU
MULTI-MASTER undersized for keyways (DIN 6885), interchangeable solid carbide heads.

MULTI-MASTER interchangeable solid carbide milling heads, used for machining aluminum. MM EA
MULTI-MASTER interchangeable solid carbide milling heads, used for machining aluminum.

MULTI-MASTER interchangeable, torodial 2 flute, solid carbide heads. MM HT
MULTI-MASTER interchangeable, torodial 2 flute, solid carbide heads.