90° Endmills Using Tangentially Clamped Inserts with 4 Helical, 13 mm Long Cutting Edges
|
|
90° Endmills Using Tangentially Clamped Inserts with 4 Helical, 13 mm Long Cutting Edges with a CLICKFIT adaptation
|
|
Endmills for HM90 AP.. 1003... Inserts
|
|
Endmills with a CLICKFIT Adaptation for HM90 AP.. 1003... Inserts
|
|
90° Endmills with a MULTI-MASTER Threaded Adaptation for HM90 AP.. 1003... Inserts
|
|
90° Endmills with a FLEXFIT Threaded Adaptation for HM90 AP.. 1003... Inserts
|
|
90° Endmills for HM90 ADKT-1505... Inserts
|
|
90° Endmills with a CLICKFIT Adaptation for HM90 ADKT-1505... Inserts
|
|
Economical Type 2 Flute, 30° Helix Center Cutting Short Solid Carbide Endmills
|
|
90° Endmills with a FLEXFIT Threaded Adaptation for HM90 ADKT-1505... Inserts
|
|
Endmills with HELIPLUS HP ANKT 0702.. Inserts
|
|
90° Endmills with a MULTI-MASTER Threaded Adaptation Using HELIPLUS HP ANKT 0702.. Inserts
|
|
90° Milling Heads with a TS Threaded Adaptation Using HELIPLUS HP ANKT 0702.. Inserts
|
|
90° Endmills with a FLEXFIT Threaded Adaptation Using HELIPLUS HP ANKT 0702.. Inserts
|
|
Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges
|
|
FF EWX-M-05
Fast Feed Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges
|
|
FF EWX-M-04
Fast Feed Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges
|
|
Fast Feed Endmills with MULTI-MASTER Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges
|
|
Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges
|
|
Fast Feed Milling Heads, Carrying Double-Sided Inserts with 6 Cutting Edges
|
|
High Feed Shell Mill Carrying Tangentially Clamped Inserts with 4 Cutting Edges
|
|
Endmills Carrying Double-Sided Inserts with Four 5 mm Radius Cutting Edges
|
|
Endmills Carrying Double-Sided Inserts with Four 6 mm Radius Cutting Edges
|
|
H400 ER-M
Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with Four Radii Cutting Edges
|
|
Fast Feed Endmills with CLICKFIT Shanks
|
|
|
Rough Profiling Endmills with Serrated or Regular Round Inserts
|
|
ERW-M
Rough Profiling Tools with a FLEXFIT Adaptation
|
|
Endmills with Square S/XPMT Inserts
|
|
90° Endmills with CNHT 0703 Inserts
|
|
Toroidal Bull Nose Endmills with CNHT...and ENHT... Inserts
|
|
Bull Nose Endmills with MULTI-MASTER Threaded Adaptation Carrying Toroidal Inserts
|
|
90° Endmills with FLEXFIT Threaded Connection Carrying CNHT 0703 Inserts
|
|
Bull Nose Endmills with FLEXFIT Threaded Adaptation Carrying Toroidal Inserts
|
|
Endmills with Square Q/S/XOMT Inserts
|
|
Multifunctional Endmills for Four Insert Shapes
|
|
Multifunctional Endmills for Four Insert Shapes with a CLICKFIT Adaptation
|
|
90° Endmills with HP AD.. 1906.. Inserts
|
|
90° Endmills with a CLICKFIT Adaptation, with HP AD..1906.. Inserts
|
|
90° Endmills with HP AD.. 2207.. Inserts
|
|
90° Endmills with a CLICKFIT Adaptation, with HP AD..2207.. Inserts
|
|
Long Reach Endmills for Machining Aluminum, with HM90 APCR 2206... Inserts
|
|
90° Face Mills with HM90 APKT 1003... Inserts
|
|
|
90° Face Mills with HP ANKT 0702.. Inserts
|
|
Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges
|
|
Moderate Feed Face Mills, Carrying Double-Sided Inserts with 6 Cutting Edges
|
|
Face Mills Carrying Double-Sided Inserts with Four 5 mm Radius Cutting Edges
|
|
Face Mills Carrying Double-Sided Inserts with Four 6 mm Radius Cutting Edges
|
|
Face Mills Carrying Double-Sided Inserts with Four 8 mm Radius Cutting Edges
|
|
FRW
Rough Profiling Face Mills with Serrated or Regular Round Inserts
|
|
F90SP-10
90° Face Mills with S/X/QPMT 1004... Inserts
|
|
93° Face Mills with Toroidal Inserts
|
|
Face Mills for Four Different Insert Contours
|
|
FR
Face Mills with Round Inserts for Profiling and Milling of Round Corners
|
|
90° Face Mills with HP AD.. 1906... Long Edged Inserts
|
|
HP F90AT-22
90° Face Mills with HP AD.. 2207... Long Edged Inserts
|
|
Face Mills for Machining Aluminum, with HM90 APCR 2206... Inserts
|
|
Solid Carbide Endmills with Different Helix 3, 4 and 5xD Neck Relief for Machining Aluminum
|
|
4 Flut Endmills, with Different Helix and Variable Pitch for Chatter Dampening, with Assorted Radii
|
|
4 Flute Endmills, 38° Helix, Variable Pitch for Chatter Dampening with 3xD Neck Relief
|
|
4 Flute Endmills, with Relieved Necks, Different Helix and Variable Pitch for Chatter Dampening
|
|
4 Flute Long Endmills, with Relieved Necks, Different Helix and Variable Pitch for Chatter Dampening
|
|
5 Flute Endmills with Different Helix (36 - 38°) and Variable Pitch for Chatter Dampening with Assorted Radii
|
|
5 Flute Chatter Free, 38° Helix, Medium Length (3xD) Endmills
|
|
Combination of Roughing and Finishing Solid Carbide Endmill in a Single Tool
|
|
Combination of Roughing and Finishing Solid Carbide Endmill with Variable Pitch for Chatter Free Milling
|
|
4-7 Flute, 45° Helix Short Length (1xD) Solid Carbide Roughing Endmills
|
|
4-7 Flute, 45° Helix Medium Length (2xD) Solid Carbide Roughing Endmills
|
|
4-7 Flute, 45° Helix Long Reach (3xD) Solid Carbide Roughing Endmills
|
|
4-5 Flute, 45° Helix Extra Long Reach (4xD) Solid Carbide Roughing Endmills
|
|
4 and 6 Flute, 45° Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc
|
|
4 Flute, 20° Helix Medium Length Solid Carbide Roughing Endmills, for High Stock Removal Rates
|
|
3, 4, 6 Flute, 30° and 38° Helix Solid Carbide Roughing Endmills, for Maximum Stock Removal of Alloy and Stainless Steel
|
|
3 Flute, 45° Helix Solid Carbide Roughing Endmills, for High Stock Removal Rates on Aluminum
|
|
3 Flute, 38° Helix Medium Length Solid Carbide Roughing Endmills for Aluminum
|
|
3 Flute, 38° Helix Short Solid Carbide Slot / Drill Endmills with Chamfered Corners
|
|
2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills
|
|
FEEDMILL High Productivity Solid Carbide Endmills
|
|
2 Flute, 30° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners
|
|
4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Chamfered Corners
|
|
3 Flute, 38° Helix Medium Length Solid Carbide Endmills
|
|
3 Flute, 38° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners
|
|
3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills
|
|
3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills with Various Radii According to DIN 6885
|
|
3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills
|
|
Economical Type 3 Flute, 45° Helix Center Cutting Short Solid Carbide Endmills
|
|
3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills with Various Radii
|
|
Economical Type 3 Flute, 45° Helix Center Cutting Medium Length Solid Carbide Endmills
|
|
4 Flute, 45° Helix Medium Length Solid Carbide Endmills
|
|
4 Flute, 45° Helix Medium Length Solid Carbide Endmills with Various Radii
|
|
4 Flute, 30° Helix Medium Length Solid Carbide Endmills
|
|
2 Flute, 30° Helix Solid Carbide Endmills, for Rib Processing on Hard Materials up to 65 HRc
|
|
Economical Type 2 Flute, 30° Helix Center Cutting Extra Long Solid Carbide Endmills
|
|
Economical Type 2 Flute, 30° Helix Center Cutting Medium Length Solid Carbide Endmills
|
|
2 Flute, 30° Helix Medium Length, Solid Carbide Endmills, for Hard Materials up to 65 HRc
|
|
Economical Type 3 Flute, 30° and 38° Helix Center Cutting Short Solid Carbide Endmills
|
|
Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Medium Length Solid Carbide Endmills
|
|
4 Flute, 30° Helix Medium Length Solid Carbide Endmills, for Hard Materials up to 65 HRc
|
|
4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Various Radii
|
|
4 Flute, 45° Helix Extra-Long Solid Carbide Endmills with Various Corner Radii, for Hardened Steel
|
|
3 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum
|
|
Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges, Variable Pitch and Large Radius Frontal Edge
|
|
2 Flute, 55° Helix Medium Length Solid Carbide Endmills for Machining Aluminum
|
|
2 Flute, 45° Helix Medium Length Solid Carbide Endmills, for Machining Aluminum
|
|
MM EC-3
3 Flute 45° Helix, Interchangeable Solid Carbide Endmill Heads
|
|
MM EC-4
4 Flute Interchangeable Solid Carbide Endmill Heads, 30° and 45° Helix, Various Corner Radii
|
|
MM EC-6
6 Flute Interchangeable Solid Carbide Endmill Heads, 30°and 45° Helix, Various Corner Radii
|
|
MM EC-D
6, 8, 10 Flute Interchangeable Solid Carbide, Endmill Heads with 50° Helix, for Machining Hardened Steel
|
|
MM EC-8/MM EC-10
8, 10 Flute Interchangeable Solid Carbide Endmill Heads, 30° and 45° Helix, Various Corner Radii
|
|
MM EC-CF
Interchangeable Solid Carbide Endmill Heads for Chatter Free Roughing and Finishing Operations
|
|
MM EFS-CF
4 Flute 38° Helix with Variable Pitch, Solid Carbide Heads for Chatter Free Roughing and Finishing Applications
|
|
MM EFS
Combination of Roughing and Finishing Interchangeable Solid Carbide Endmill Heads
|
|
MM HC
Interchangeable Solid Carbide Slot Drill Milling Heads with Two 10° Helix Flutes
|
|
MM ECU
3 Flute Undersized Interchangeable Solid Carbide Heads for Keyways (DIN 6885)
|
|
MM ERS
Interchangeable Solid Carbide Rough Milling Heads, for High Metal Removal Rates
|
|
MM ERA
Interchangeable Solid Carbide Rough Milling Heads, for Machining Aluminum
|
|
MM EA-CF
Interchangeable Solid Carbide Endmill Heads with Variable Helix for Machining Aluminum
|
|
MM EA
Interchangeable Solid Carbide Slot Drill Milling Heads for Machining Aluminum
|
|
MM HT-NCSR
2 Flute Chip Splitting Toroidal, Solid Carbide Milling Heads
|
|
MM HT-NWFR
2 Flute Toroidal Solid Carbide Milling Heads with a Side Tangential Wiper
|
|
MM HT
Torodial 2 Flute Interchangeable Solid Carbide Heads
|
|
MM ETR
Torodial 6 Flute Interchangeable Solid Carbide Heads
|
|
MM FF
2 Flute FEEDMILL Interchangeable Solid Carbide Heads, for Milling at Very High Feed and Small D.O.C.
|
|
MM EFF
4,6 Flute Solid Carbide Heads for Milling at Very High Feed and Small D.O.C.
|
|
|
