ISCAR Main Banner
  •  
 Drilling - Drilling                    OPTIONS: Position the cursor on the picture for a description Cutting Conditions Machine Power 

CHAMDRILLJET 1.5xD drills with indexable heads have coolant holes which pass through the drill and the drilling head. DSM­1.5D (Dia 10.0-19.9)
CHAMDRILLJET 1.5xD drills with indexable heads have coolant holes which pass through the drill and the drilling head.

CHAMDRILLJET 3xD drills with indexable heads have coolant holes which pass through the drill and the drilling head. DSM­3D (Dia 10.0-19.9)
CHAMDRILLJET 3xD drills with indexable heads have coolant holes which pass through the drill and the drilling head.

CHAMDRILLJET 5xD drills with indexable heads and coolant holes which pass through the drill and the drilling head. DSM­5D (Dia 10.0-19.9)
CHAMDRILLJET 5xD drills with indexable heads and coolant holes which pass through the drill and the drilling head.

CHAMDRILL indexable head drills, with 3xD drilling depth. DCM-3D (Dia 7.5-25.9)
CHAMDRILL indexable head drills, with 3xD drilling depth.

Indexable Drilling Heads Used on CHAMGUN Gundrills GDI
Indexable Drilling Heads Used on CHAMGUN Gundrills

Indexable head drills without a flange. Drilling depth 3.5xD DCM-3.5D (D7.5-20.9 Type B)
Indexable head drills without a flange. Drilling depth 3.5xD

CHAMDRILL indexable head drills, with 5xD drilling depth. DCM-5D (Dia 7.5-25.9)
CHAMDRILL indexable head drills, with 5xD drilling depth.

CHAMDRILL indexable head drills. Drilling depth 8xD. DCM-8D (Dia 10-25.9)
CHAMDRILL indexable head drills. Drilling depth 8xD.

CHAMDRILL drills with chamfering insert, used mainly for pre-thread holes. DCT (M8-M24)
CHAMDRILL drills with chamfering insert, used mainly for pre-thread holes.

MULTI-MASTER Centering drill heads according to DIN 332 MM ECS
MULTI-MASTER Centering drill heads according to DIN 332

Solid carbide drills without coolant holes. Drilling depth 4xD. SCD-AP4 (Dia 0.8-2.9)
Solid carbide drills without coolant holes. Drilling depth 4xD.

Solid carbide drills without coolant holes. Drilling depth 6xD. SCD-AP6 (Dia 0.8-2.9)
Solid carbide drills without coolant holes. Drilling depth 6xD.

3-Flute solid carbide drills drilling depth 5xD (Without coolant holes) DIN 6537 SCCD-AP5
3-Flute solid carbide drills drilling depth 5xD (Without coolant holes) DIN 6537

Solid carbide drills without coolant holes. Drilling depth 3xD. SCD-AP3 (Dia3.0-20.0)
Solid carbide drills without coolant holes. Drilling depth 3xD.

Solid Carbide Drills 20xD Ratio with internal coolant - Shank DIN 6535 HA. SCD-ACP20
Solid Carbide Drills 20xD Ratio with internal coolant - Shank DIN 6535 HA.

Pre-Thread Solid carbide drills with coolant holes. SCDT
Pre-Thread Solid carbide drills with coolant holes.

Solid Carbide Drills 20-22xD Ratio with internal coolant - Shank DIN 6535 HA. (for automotive crankshaft applications) SCD-ACP-CS
Solid Carbide Drills 20-22xD Ratio with internal coolant - Shank DIN 6535 HA. (for automotive crankshaft applications)

Solid carbide drills without coolant holes. Drilling depth 5xD. SCD-AG5 (Dia3.0-20.0)
Solid carbide drills without coolant holes. Drilling depth 5xD.

Solid carbide drills with coolant holes. Drilling depth 5xD. SCD-ACG5 (Dia3.0-20.0)
Solid carbide drills with coolant holes. Drilling depth 5xD.

Solid carbide drills with coolant holes. Drilling depth 8xD. SCD-ACG8 (Dia3.0-10.0)
Solid carbide drills with coolant holes. Drilling depth 8xD.

Solid Carbide Drills for Hard Materials, Drilling Depth 5xD SCD-AH5 (Dia 3.0-12.0)
Solid Carbide Drills for Hard Materials, Drilling Depth 5xD

Solid carbide drilling reamers straight flute-3xD (for drilling/reaming of ferritic materials only). DIN 6537. SCDR-ACK3 (Dia3.0-20.0)
Solid carbide drilling reamers straight flute-3xD (for drilling/reaming of ferritic materials only). DIN 6537.

Solid carbide drilling reamers straight flute-5xD (for drilling/reaming of ferritic materials only). DIN 6537. SCDR-ACK5 (Dia3.0-20.0)
Solid carbide drilling reamers straight flute-5xD (for drilling/reaming of ferritic materials only). DIN 6537.

HSS twist drills 6-9xD. Used for deep holes in steel, malleable cast iron, aluminum and magnesium alloys. HSD-AG6 (H.S.S.)
HSS twist drills 6-9xD. Used for deep holes in steel, malleable cast iron, aluminum and magnesium alloys.

HSS twist drills 10-20xD. Used for very deep holes in steel, malleable cast iron, aluminum and magnesium alloys. HSD-AG10 (H.S.S.)
HSS twist drills 10-20xD. Used for very deep holes in steel, malleable cast iron, aluminum and magnesium alloys.

HSS twist drills 3-4xD. Used for stainless steel, mild steel and aluminum alloys. HSD-AM3 (H.S.S.)
HSS twist drills 3-4xD. Used for stainless steel, mild steel and aluminum alloys.

HSS twist drills 4-5xD. Used for stainless steel, mild steel and aluminum alloys. HSD-AM6 (H.S.S.)
HSS twist drills 4-5xD. Used for stainless steel, mild steel and aluminum alloys.

DR indexable square insert drills. Drilling depth 2D. DR-2D-N (Dia 14-60)
DR indexable square insert drills. Drilling depth 2D.

DR indexable square inserts drills with coolant holes. Drilling depth - 3xD. DR-3D-N (Dia 14-38)
DR indexable square inserts drills with coolant holes. Drilling depth - 3xD.

DR indexable square inserts drills with coolant holes. Drilling depth - 4xD. DR-4D-N (Dia 14-34)
DR indexable square inserts drills with coolant holes. Drilling depth - 4xD.

DR indexable HELIQUAD insert drills. Drilling depth 2xD. DR-2XD (Dia16-60)
DR indexable HELIQUAD insert drills. Drilling depth 2xD.

DR indexable HELIQUAD insert drills. Drilling depth 3xD. DR-3XD (Dia16-38)
DR indexable HELIQUAD insert drills. Drilling depth 3xD.

Indexable drills with a CLICKFIT adaptation, using square inserts. Drilling depth 3xD. DR-3XD-CF (Dia 17 & 22)
Indexable drills with a CLICKFIT adaptation, using square inserts. Drilling depth 3xD.

Cartridges used for large diameter drills CA-SOMT
Cartridges used for large diameter drills

DZ indexable serrated insert drills. Drilling depth 2.25xD. DZ-2.25XD (Dia23-55)
DZ indexable serrated insert drills. Drilling depth 2.25xD.

DR large diameter drills with cartridges DR-CA-N
DR large diameter drills with cartridges

DZ indexable serrated insert drills. Drilling depth 3xD. DZ-3XD (Dia23-38)
DZ indexable serrated insert drills. Drilling depth 3xD.

DZ indexable serrated insert drills. Drilling depth 4xD. DZ-4XD (Dia23-33)
DZ indexable serrated insert drills. Drilling depth 4xD.

Drills with a CLICKFIT adaptation using triangular inserts with a serrated cutting edge. Drilling depth 3xD. DZ-3XD-CF (Dia25&32)
Drills with a CLICKFIT adaptation using triangular inserts with a serrated cutting edge. Drilling depth 3xD.

Internal coolant boring and drilling bars for XOMT inserts. A-SXFOR-DR
Internal coolant boring and drilling bars for XOMT inserts.

Multifunction drilling, boring, facing and external turning tool. DR-MF-2.25D
Multifunction drilling, boring, facing and external turning tool.

Multifunction, solid carbide tools. Used for drilling, facing, int. and ext. turning on Swiss and small CNC machines. PICCO-MF
Multifunction, solid carbide tools. Used for drilling, facing, int. and ext. turning on Swiss and small CNC machines.

Solid carbide tools, used for drilling, facing, int. and ext. turning and threading on Swiss and small CNC machines. PICCO-MFT
Solid carbide tools, used for drilling, facing, int. and ext. turning and threading on Swiss and small CNC machines.

Deep Single Tube counterboer with through hole, External 4 start thread connection and 1-Brazed tip. DST-E1
Deep Single Tube counterboer with through hole, External 4 start thread connection and 1-Brazed tip.

Deep, Single Tube counterborer without a through hole, Internal Thread and a Brazed Tip DST-I1
Deep, Single Tube counterborer without a through hole, Internal Thread and a Brazed Tip

Deep Single Tube Drill with External Single Thread Connection and a Brazed Single Tip DSD-E0
Deep Single Tube Drill with External Single Thread Connection and a Brazed Single Tip

Deep, Single Tube Drill with External 4 Start Thread Connection and a Brazed Single Tip DSD-E1
Deep, Single Tube Drill with External 4 Start Thread Connection and a Brazed Single Tip

Deep Single Tube Drill with External 4 Start Thread Connection and 3 Brazed Tips DSD-E3
Deep Single Tube Drill with External 4 Start Thread Connection and 3 Brazed Tips

Deep Single Tube Drill with Internal Thread and a Brazed Tip DSD-I1
Deep Single Tube Drill with Internal Thread and a Brazed Tip

Deep, Single Tube counterborer with Through Hole, External, 4 Start Thread Connection and a Brazed Tip DSC-E1
Deep, Single Tube counterborer with Through Hole, External, 4 Start Thread Connection and a Brazed Tip

Deep, Single Tube Counterborer with through hole, Internal Thread and a Brazed Tip DSC-I1
Deep, Single Tube Counterborer with through hole, Internal Thread and a Brazed Tip

Deep, Double Tube Drill with External 4 Start Thread connection and Brazed Tips DDD-E3
Deep, Double Tube Drill with External 4 Start Thread connection and Brazed Tips

Deep, Double Tube Conuterborer with a Through Hole, External 4 Start Thread Connection and a Brazed Tip DDC-E1
Deep, Double Tube Conuterborer with a Through Hole, External 4 Start Thread Connection and a Brazed Tip

Deep Double Tube Conuterborer without a Through Hole, External 4 Start Thread Connection and a Brazed Tip DDT-E1
Deep Double Tube Conuterborer without a Through Hole, External 4 Start Thread Connection and a Brazed Tip