ISCAR Main Banner
 Tooling Systems - Center alignment devices                    OPTIONS: Position the cursor on the picture for a description  

Eccentric sleeves are used for enlarging or reducing DR nominal drilling diameter by shifting the drill off center. ECCENTER SLEEVE
Eccentric sleeves are used for enlarging or reducing DR nominal drilling diameter by shifting the drill off center.

FINEFIT Center Alignment Shank and Base with a CAMFIX Adaptations. (Used for specially tailored tool holders) ADJ C-ER
FINEFIT Center Alignment Shank and Base with a CAMFIX Adaptations. (Used for specially tailored tool holders)

FINEFIT DIN 6499 ER Collet Chuck with a CAMFIX Adaptations ADJ C#...
FINEFIT DIN 6499 ER Collet Chuck with a CAMFIX Adaptations

FINEFIT Center Alignment Shank and Base with a DIN 69871 Taper Shank (Used for specially tailored tool holders). ADJ DIN69871
FINEFIT Center Alignment Shank and Base with a DIN 69871 Taper Shank (Used for specially tailored tool holders).

Center Alignment DIN 6499 ER Collet Chucks with DIN 69871 Form A/B Taper Shanks ADJ DIN69871-ER
Center Alignment DIN 6499 ER Collet Chucks with DIN 69871 Form A/B Taper Shanks

FINEFIT Center Alignment Shank and Base with a DIN69893 HSK Taper Shank. (Used for specially tailored tool holders) ADJ HSK A
FINEFIT Center Alignment Shank and Base with a DIN69893 HSK Taper Shank. (Used for specially tailored tool holders)

DIN6499 ER Collet Chucks with Center Alignment (FINEFIT) and HSK DIN69893/A Taper Shanks ADJ HSK A-ER
DIN6499 ER Collet Chucks with Center Alignment (FINEFIT) and HSK DIN69893/A Taper Shanks

Center Alignment Shanks and Bases with BT MAS-403 Tapered Shanks (Used for specially tailored tool holders). ADJ BT
Center Alignment Shanks and Bases with BT MAS-403 Tapered Shanks (Used for specially tailored tool holders).

DIN 6499 ER Collet Chucks with Center Alignment and BT MAS-403 Tapered Shanks ADJ BT-ER
DIN 6499 ER Collet Chucks with Center Alignment and BT MAS-403 Tapered Shanks

FINEFIT Center Alignment Cylindrical Shanks with Bases (Used for specially tailored tool holders) ADJ ST
FINEFIT Center Alignment Cylindrical Shanks with Bases (Used for specially tailored tool holders)

FINEFIT DIN 6499 ER Collet Chucks with Center Alignment and  Cylindrical Shanks ADJ ST-ER
FINEFIT DIN 6499 ER Collet Chucks with Center Alignment and Cylindrical Shanks

Radial and Angular Adjustable Collet Chuck Flanges ADJ ER NOSE
Radial and Angular Adjustable Collet Chuck Flanges

Radial and Angular Adjustable Hydraulic Flanges ADJ HYDRO
Radial and Angular Adjustable Hydraulic Flanges

GYRO Center Alignment ER Collet Chucks with VDI DIN 69880 Shanks GYRO DIN69880-ER
GYRO Center Alignment ER Collet Chucks with VDI DIN 69880 Shanks

GYRO ER Collet Center Alignment Device with a Cylindrical Shank GYRO ST-ER
GYRO ER Collet Center Alignment Device with a Cylindrical Shank