PICCO-010(round face groove)
Inserts for Round Profile Face Grooving

PICCO-010/610(face grooving)
Inserts for Face Grooving

PICCO-015 (face grooving)
Inserts for Deep Face Grooving

PICCO-016/020(face grooving)
Inserts with Coolant Holes for Deep Face Grooving

MGCH-C (face)
Face Machining Inserts for Dmin 12 - Dmax 19 mm Penetration Range, Using GFQR Inserts

MIFHR
Bars for Face and Internal Grooving, Undercutting and Threading Inserts

PCHBR/L
Double-Ended Parting and Grooving Blades for PENTACUT Inserts

PCHPR/L
Facing, Grooving, Parting and Recessing Perpendicular Holders for Inserts with 5 Cutting Edges

PCHPRS/LS
Perpendicular Shank Tools, for Machining Next to Long Central Shaft, Carrying Pentagonal Inserts

PCHR/L-34
Grooving, Parting and Recessing Holders for Inserts with 5 Cutting Edges

HGHR/L-3
Integral Holders for Face Grooving and Turning, Dmin. 12 mm

HFPAD-3
Adapters for Face Machining

HFPAD-4
Adapters for Face Machining

HFPAD-5
Adapters for Face Machining

HFPAD-6
Adapters for Face Machining

HFHR/L-3T
Integral Holders for Facing, Dmin. 25 mm

HFHR/L-4T
Integral Holders for Facing, Dmin. 25 mm

HFHR/L-5T
Integral Holders for Facing, Dmin. 25 mm

HFHR/L-6T
Integral Holders for Facing, Dmin. 26 mm

HFFR/L-T
Blades for Face Machining

HGAER/L-3
Adapters for External Facing Along Shafts

HFAER/L-4T
Adapters for External Facing Along Shafts

HFAER/L-5T, 6T
Adapters for External Facing Along Shafts

GHFG-R/L-8
Holders for Face Grooving and Turning Along Shafts

GHFGR/L-8
Holders for Face Grooving and Turning

GAFG-R/L-8
Adapters for Face Machining

CGFG 51-P8
Blades for Face Machining, with 8 mm Inserts

TNFFA-IQ
Reinforced Face Grooving Blades

SGFFR/L
Face Grooving Integral Shank Tools

SGFFA
Reinforced Face Grooving Blades, for Standard Tool Blocks

SGFFH
Face Grooving Blades

TNFFH-IQ
Face Grooving Blades

HFHR/L-M
Toolholders for Shallow Face Grooving

HFHPR/L-M
Perpendicular Toolholders for Shallow Face Grooving

HGAIR/L-3
Adapters for Internal Face Grooving and Turning

HFAIR/L-4
Adapters for Internal Face Grooving and Turning

HFAIR/L-DG
Adapters for Internal Face Grooving and Turning

HFIR/L-MC
Boring Bars for Internal Grooving and Turning

C#-HFIR/L-MC
Boring Bars for Internal Grooving and Turning with CAMFIX (ISO 26623-1 standard) Exchangeable, Tapered Shanks

CR HFIR/L-M
Cartridges for Face Grooving and Turning

IM-HFIR/L-MC
Tools for Internal Grooving and Turning with ISO 26622-1(*) Tapered Shank