ISCAR Main Banner ISCAR Main Banner
 Milling - Slotting                    OPTIONS : Position the cursor on the picture for a description  

Endmills with Tangentially Clamped Inserts and MULTI-MASTER Adaptation T290 ELN-MM-05
Endmills with Tangentially Clamped Inserts and MULTI-MASTER Adaptation

Long Reach Endmills P290 EPW
Long Reach Endmills

90° Endmills Using Tangentially Clamped Inserts with 4 Helical, .315 T490 ELN-08
90° Endmills Using Tangentially Clamped Inserts with 4 Helical, .315" Long Cutting Edges

90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying Tangentially Clamped Inserts T490 ELN-MM..-08
90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying Tangentially Clamped Inserts

90° Endmills with a FLEXFIT Threaded Adaptation Carrying Tangentially Clamped Inserts T490 ELN-M-08
90° Endmills with a FLEXFIT Threaded Adaptation Carrying Tangentially Clamped Inserts

Endmills with Tangentially Clamped Inserts T290 ELN-10
Endmills with Tangentially Clamped Inserts

90° Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 E90AX-09
90° Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

90° Endmills Carrying H490 ANKX 12...Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 E90AX-12
90° Endmills Carrying H490 ANKX 12...Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, .490 T490 ELN-13
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, .490" Long Cutting Edges

90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, .490 T490 ELN-CF-13
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, .490" Long Cutting Edges with a CLICKFIT Adaptation

Endmills for HM90 AP.. 1003... Inserts HM90 E90A-10
Endmills for HM90 AP.. 1003... Inserts

Endmills with a CLICKFIT Adaptation Carrying HM90 AP.. 1003... Inserts HM90 E90A-CF-10
Endmills with a CLICKFIT Adaptation Carrying HM90 AP.. 1003... Inserts

90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying HM90 AP.. 1003... Inserts HM90 E90A-MM-10
90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying HM90 AP.. 1003... Inserts

90° Endmills with a FLEXFIT Threaded Adaptation Carrying HM90 AP.. 1003... Inserts HM90 E90A-M-10
90° Endmills with a FLEXFIT Threaded Adaptation Carrying HM90 AP.. 1003... Inserts

90° Endmills for HM90 ADKT-1505... Inserts HM90 E90AD-15
90° Endmills for HM90 ADKT-1505... Inserts

90° Endmills with a CLICKFIT Adaptation for HM90 ADKT-1505... Inserts HM90 E90AD-CF-15
90° Endmills with a CLICKFIT Adaptation for HM90 ADKT-1505... Inserts

90° Endmills with a FLEXFIT Threaded Adaptation for HM90 ADKT-1505... Inserts HM90 E90AD-M-15
90° Endmills with a FLEXFIT Threaded Adaptation for HM90 ADKT-1505... Inserts

90° Endmills Carrying H490 ANKX 17... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 E90AX-17
90° Endmills Carrying H490 ANKX 17... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

90° Endmills Carrying the HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges HM390 ETD-15
90° Endmills Carrying the HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges

90° Endmills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges HM390 ETP-10
90° Endmills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges

90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, .630 T490 ELN-16
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, .630" Long Cutting Edges

Endmills with HELIPLUS HP ANKT 0702.. Inserts HP E90AN-07
Endmills with HELIPLUS HP ANKT 0702.. Inserts

90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying HELIPLUS HP ANKT 0702.. Inserts HP E90AN-MM-07
90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying HELIPLUS HP ANKT 0702.. Inserts

Endmills with Square Q/S/XOMT Inserts E90X
Endmills with Square Q/S/XOMT Inserts

Endmills with Square S/XPMT Inserts E90SP
Endmills with Square S/XPMT Inserts

90° Endmills for 3M AXKT 1304.../2006... Inserts 3M E90AX
90° Endmills for 3M AXKT 1304.../2006... Inserts

90° Endmills with a CLICKFIT Adaptation for 3M AXKT 1304.../2006... Inserts 3M E90AX-CF
90° Endmills with a CLICKFIT Adaptation for 3M AXKT 1304.../2006... Inserts

Multifunction Endmills which can Carry Several Insert Geometries HCE
Multifunction Endmills which can Carry Several Insert Geometries

Multifunction Endmills with a MULTI-MASTER Threaded Adaptation, which can Carry Several Insert Geometries HCE-MM
Multifunction Endmills with a MULTI-MASTER Threaded Adaptation, which can Carry Several Insert Geometries

Multifunction Endmills with a FLEXFIT Threaded Adaptation, which can Carry Several Insert Geometries HCE-M
Multifunction Endmills with a FLEXFIT Threaded Adaptation, which can Carry Several Insert Geometries

Multifunctional Endmills for Four Insert Shapes ECM
Multifunctional Endmills for Four Insert Shapes

90° Endmills with HP AD.. 1906.. Inserts HP E90AT-19
90° Endmills with HP AD.. 1906.. Inserts

90° Endmills with HP AD.. 2207.. Inserts HP E90AT-22
90° Endmills with HP AD.. 2207.. Inserts

90° Endmills with a CLICKFIT Adaptation, with HP AD..2207.. Inserts HP E90AT-CF-22
90° Endmills with a CLICKFIT Adaptation, with HP AD..2207.. Inserts

Long Reach Endmills for Machining Aluminum, with HM90 AXCR 1505... Inserts HM90 EAL-15
Long Reach Endmills for Machining Aluminum, with HM90 AXCR 1505... Inserts

Long Reach Endmills for Machining Aluminum, with HM90 APCR 1605 Inserts HM90 EAL-16
Long Reach Endmills for Machining Aluminum, with HM90 APCR 1605 Inserts

Long Reach Endmills with CLICKFIT Adaptation for Machining Aluminum, Carrying HM90 APCR 1605... Inserts HM90 EAL-CF4-16
Long Reach Endmills with CLICKFIT Adaptation for Machining Aluminum, Carrying HM90 APCR 1605... Inserts

Endmills for Machining Aluminum, Carrying HM90 APCR 1605... Inserts with Corner Radii Equal or Larger Than .197 HM90 EAL-16BR
Endmills for Machining Aluminum, Carrying HM90 APCR 1605... Inserts with Corner Radii Equal or Larger Than .197"

Long Reach Endmills with Integral HSK Adaptation for Machining Aluminum, Carrying HM90 APCR 1605... Inserts HM90 EAL-HSK63A-16
Long Reach Endmills with Integral HSK Adaptation for Machining Aluminum, Carrying HM90 APCR 1605... Inserts

4 Flute, (3xD) Endmills, 38° Helix, Variable Pitch for Chatter Dampening with Relieved Neck ECI-E4-CF
4 Flute, (3xD) Endmills, 38° Helix, Variable Pitch for Chatter Dampening with Relieved Neck

5 Flute Chatter Free, 38° Helix, Medium Length (1xD) Endmills ECI-E5-CF
5 Flute Chatter Free, 38° Helix, Medium Length (1xD) Endmills

4 Flute Endmills with Different Helix (35 & 37°) and Variable Pitch for Chatter Dampening with Assorted Radii ECI-H4R-CF
4 Flute Endmills with Different Helix (35 & 37°) and Variable Pitch for Chatter Dampening with Assorted Radii

4 Flute, (3xD) Endmills with Relieved Necks, Different Helix (35 &37°) and Variable Pitch for Chatter Dampening ECI-H4R-CF (relieved neck)
4 Flute, (3xD) Endmills with Relieved Necks, Different Helix (35 &37°) and Variable Pitch for Chatter Dampening

5 Flute Endmills with Different Helix (36-38°) and Variable Pitch for Chatter Dampening with Assorted Radii ECI-H5R-CF
5 Flute Endmills with Different Helix (36-38°) and Variable Pitch for Chatter Dampening with Assorted Radii

A Combination of Roughing and Finishing Solid Carbide Endmill in a Single Tool EFSI-B44
A Combination of Roughing and Finishing Solid Carbide Endmill in a Single Tool

A Combination of Roughing and Finishing Solid Carbide Endmills with Round Corners EFSI-B44-R
A Combination of Roughing and Finishing Solid Carbide Endmills with Round Corners

A Combination of Roughing and Finishing Solid Carbide Endmill with Variable Pitch for Chatter Free Milling EFSI-E44
A Combination of Roughing and Finishing Solid Carbide Endmill with Variable Pitch for Chatter Free Milling

4 Flute, (3xD), 38° Helix Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges and Relieved Necks ECPI-E4L
4 Flute, (3xD), 38° Helix Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges and Relieved Necks

3 Flute, 38° Helix, Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges for High Stock Removal Rates ECPI-E3L
3 Flute, 38° Helix, Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges for High Stock Removal Rates

2 Flute 30° Helix, Center Cutting Medium Length Solid Carbide Endmills with Chamfered Corners ECCI-A-2
2 Flute 30° Helix, Center Cutting Medium Length Solid Carbide Endmills with Chamfered Corners

Solid Carbide Endmill Roughers, 4 Flute 45° Helix Medium Length (2xD) for High Stock Removal Rates ECRI-B-M
Solid Carbide Endmill Roughers, 4 Flute 45° Helix Medium Length (2xD) for High Stock Removal Rates

3, 4, 6 Flute, 30° and 38° Helix, (3xD) Solid Carbide Roughing Endmills with Relieved Neck for Alloy and Stainless Steel ERFI-A/E-3,4,6
3, 4, 6 Flute, 30° and 38° Helix, (3xD) Solid Carbide Roughing Endmills with Relieved Neck for Alloy and Stainless Steel

3 Flute, (3xD), 45° Helix Solid Carbide Roughing Endmills with Relieved Necks, for High Stock Removal Rates of Aluminum ECRI-B3
3 Flute, (3xD), 45° Helix Solid Carbide Roughing Endmills with Relieved Necks, for High Stock Removal Rates of Aluminum

3 Flute, 38° Helix, Medium Length, Solid Carbide Roughing Endmills for Aluminum ERCI-E-3
3 Flute, 38° Helix, Medium Length, Solid Carbide Roughing Endmills for Aluminum

2 Flute 30° Helix, Center Cutting Solid Carbide Endmills ECI-A-2
2 Flute 30° Helix, Center Cutting Solid Carbide Endmills

FEEDMILL High Productivity Solid Carbide Endmills EFFI-S4
FEEDMILL High Productivity Solid Carbide Endmills

4 Flute, 30° Helix, Medium Length, Solid Carbide Endmills with Chamfered Corners ECCI-A-4
4 Flute, 30° Helix, Medium Length, Solid Carbide Endmills with Chamfered Corners

3 Flute, 38° Helix, Medium Length, Solid Carbide Endmills ECI-E-3
3 Flute, 38° Helix, Medium Length, Solid Carbide Endmills

4 Flute 38° Helix Medium Length Solid Carbide Endmills ECI-E-4
4 Flute 38° Helix Medium Length Solid Carbide Endmills

3 Flute, 45° Helix, Medium Length, Slot / Drill Solid Carbide Endmills ECI-B-3
3 Flute, 45° Helix, Medium Length, Slot / Drill Solid Carbide Endmills

3 Flute, 45° Helix, Medium Length, Solid Carbide Endmills for Machining Aluminum ECAI-B-3
3 Flute, 45° Helix, Medium Length, Solid Carbide Endmills for Machining Aluminum

Solid Carbide Endmills with Different Helix and Variable Pitch for Chatter Dampening for Machining Aluminum ECAI-H3-CF
Solid Carbide Endmills with Different Helix and Variable Pitch for Chatter Dampening for Machining Aluminum

6 Flute, 45° Helix, Medium Length, Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRc ECHI-B6
6 Flute, 45° Helix, Medium Length, Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRc

Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges, Variable Pitch and Large Radius Frontal Edge EFPI-E4,5CF
Sold Carbide Roughing Endmills with Chip Splitting Cutting Edges, Variable Pitch and Large Radius Frontal Edge

2 Flute, 45° Helix, Medium Length, Solid Carbide Endmills for Machining Aluminum ECAI-B-2
2 Flute, 45° Helix, Medium Length, Solid Carbide Endmills for Machining Aluminum

2 Flute, 55° Helix, Medium Length Solid Carbide Endmills for Machining Aluminum ECAI-F-2
2 Flute, 55° Helix, Medium Length Solid Carbide Endmills for Machining Aluminum

3 Flute 45° Helix, Interchangeable Solid Carbide Endmill Heads MM EC-3
3 Flute 45° Helix, Interchangeable Solid Carbide Endmill Heads

4 Flute Interchangeable Solid Carbide Endmill Heads, 30° and 45° Helix, Various Corner Radii MM EC-4
4 Flute Interchangeable Solid Carbide Endmill Heads, 30° and 45° Helix, Various Corner Radii

6 Flute, 45° Helix, Long Solid Carbide Endmills ECLI-B-6
6 Flute, 45° Helix, Long Solid Carbide Endmills

6 Flute Interchangeable Solid Carbide Endmill Heads, 30° and 45° Helix, Various Corner Radii MM EC-6
6 Flute Interchangeable Solid Carbide Endmill Heads, 30° and 45° Helix, Various Corner Radii

8, 10 Flute Interchangeable Solid Carbide Endmill Heads, 30° and 45° Helix, Various Corner Radii MM EC-8/MM EC-10
8, 10 Flute Interchangeable Solid Carbide Endmill Heads, 30° and 45° Helix, Various Corner Radii

6, 8, 10 Flute Interchangeable Solid Carbide Endmill Heads with 50° Helix, for Machining Hardened Steel MM EC-D
6, 8, 10 Flute Interchangeable Solid Carbide Endmill Heads with 50° Helix, for Machining Hardened Steel

Interchangeable Solid Carbide Endmill Heads for Chatter Free Roughing and Finishing Operations MM EC-CF
Interchangeable Solid Carbide Endmill Heads for Chatter Free Roughing and Finishing Operations

Combination of Roughing and Finishing Interchangeable Solid Carbide Endmill Heads MM EFS
Combination of Roughing and Finishing Interchangeable Solid Carbide Endmill Heads

4 Flute 38° Helix with Variable Pitch, Solid Carbide Heads for Chatter Free Roughing and Finishing Applications MM EFS-CF
4 Flute 38° Helix with Variable Pitch, Solid Carbide Heads for Chatter Free Roughing and Finishing Applications

Interchangeable Solid Carbide Slot Drill Milling Heads with Two 10° Helix Flutes MM HC
Interchangeable Solid Carbide Slot Drill Milling Heads with Two 10° Helix Flutes

3 Flute Undersized Interchangeable Solid Carbide Heads for Keyways (DIN 6885) MM ECU
3 Flute Undersized Interchangeable Solid Carbide Heads for Keyways (DIN 6885)

Interchangeable Solid Carbide Rough Milling Heads, for High Metal Removal Rates MM ERS
Interchangeable Solid Carbide Rough Milling Heads, for High Metal Removal Rates

Interchangeable Solid Carbide Slot Drill Milling Heads for Machining Aluminum MM EA
Interchangeable Solid Carbide Slot Drill Milling Heads for Machining Aluminum

Interchangeable Solid Carbide Endmill Heads with Variable Helix for Machining Aluminum MM EA-CF
Interchangeable Solid Carbide Endmill Heads with Variable Helix for Machining Aluminum

Torodial 2 Flute Interchangeable Solid Carbide Heads MM HT
Torodial 2 Flute Interchangeable Solid Carbide Heads

2 Flute Chip Splitting Toroidal, Solid Carbide Milling Heads MM HT-NCSR
2 Flute Chip Splitting Toroidal, Solid Carbide Milling Heads

2 Flute Toroidal Solid Carbide Milling Heads with a Side Tangential Wiper MM HT-NWFR
2 Flute Toroidal Solid Carbide Milling Heads with a Side Tangential Wiper

Torodial 6 Flute Interchangeable Solid Carbide Heads MM ETR
Torodial 6 Flute Interchangeable Solid Carbide Heads

4, 6 Flute Solid Carbide Heads for Milling at Very High Feed and Small D.O.C. MM EFF
4, 6 Flute Solid Carbide Heads for Milling at Very High Feed and Small D.O.C.

2 Flute FEEDMILL Interchangeable Solid Carbide Heads, for Milling at Very High Feed and Small D.O.C. MM FF
2 Flute FEEDMILL Interchangeable Solid Carbide Heads, for Milling at Very High Feed and Small D.O.C.

Extended Flute Shell Mills with HM90 ADKT 1505... Inserts SM
Extended Flute Shell Mills with HM90 ADKT 1505... Inserts

Extended Flute Endmills with APKT/R-10... Inserts APK-FE
Extended Flute Endmills with APKT/R-10... Inserts

Extended Flute Cutters with ADKT/R-15... Inserts ADK
Extended Flute Cutters with ADKT/R-15... Inserts

Heavy Duty Extended Flute Endmills with 3M AXKT 1304... Inserts 3M AXK-13
Heavy Duty Extended Flute Endmills with 3M AXKT 1304... Inserts

Heavy Duty Extended Flute Endmills with CLICKFIT Shanks, Carrying 3M AXKT 1304... Inserts 3M AXK-CF-13
Heavy Duty Extended Flute Endmills with CLICKFIT Shanks, Carrying 3M AXKT 1304... Inserts

Heavy Duty Extended Flute Shell Mills with 3M AXKT 1304.../2006... Inserts 3M SM
Heavy Duty Extended Flute Shell Mills with 3M AXKT 1304.../2006... Inserts

Extended Flute Endmills with S/Q/XOMT-06.. Inserts XOK
Extended Flute Endmills with S/Q/XOMT-06.. Inserts

Extended Flute Endmills with HP ANK-07... Inserts HP ANK-07
Extended Flute Endmills with HP ANK-07... Inserts

90° Face Mills Carrying Double-Sided Inserts with 4 Helical Cutting Edges H490 F90AX-12
90° Face Mills Carrying Double-Sided Inserts with 4 Helical Cutting Edges

90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-17
90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

90° Face Mills with T290 LNMT 1004... Tangentially Clamped Inserts T290 FLN-10
90° Face Mills with T290 LNMT 1004... Tangentially Clamped Inserts

90° Face Mills Using Tangentially Clamped Inserts with 4 Helical, .315 T490 FLN-08
90° Face Mills Using Tangentially Clamped Inserts with 4 Helical, .315" Long Cutting Edges

90° Face Mills Using Tangentially Clamped Inserts with 4 Helical Long Cutting Edges T490 FLN-13
90° Face Mills Using Tangentially Clamped Inserts with 4 Helical Long Cutting Edges

90° Face Mills with T290 LNMT 1506... Tangentially Clamped Inserts T290 FLN-15
90° Face Mills with T290 LNMT 1506... Tangentially Clamped Inserts

90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, .630 T490 FLN-16
90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, .630" Long Cutting Edges

90° Face Mills with LN..1106... Tangentially Clamped Inserts F90LN-N11
90° Face Mills with LN..1106... Tangentially Clamped Inserts

90° Face Mills with LN..1506... Tangentially Clamped Inserts F90LN-N15
90° Face Mills with LN..1506... Tangentially Clamped Inserts

90° Face Mills with HM90 APKT 1003... Inserts HM90 F90AP-10
90° Face Mills with HM90 APKT 1003... Inserts

90° Face Mills with HM90 ADKT 1505... Inserts HM90 F90A-15
90° Face Mills with HM90 ADKT 1505... Inserts

90° Face Mills with S/X/QPMT 1004... Inserts F90SP-10
90° Face Mills with S/X/QPMT 1004... Inserts

90° Face Mills with S/QDM. 12... Inserts F90SD-12
90° Face Mills with S/QDM. 12... Inserts

90° Face Mills Using SDMT 1606... Inserts F90SD-16
90° Face Mills Using SDMT 1606... Inserts

90° Face Mills with HP ANKT 0702.. Inserts HP F90AN-07
90° Face Mills with HP ANKT 0702.. Inserts

90° Face Mills with HP AD.. 1906... Long Edged Inserts HP F90AT-19
90° Face Mills with HP AD.. 1906... Long Edged Inserts

90° Face Mills with HP AD.. 2207... Long Edged Inserts HP F90AT-22
90° Face Mills with HP AD.. 2207... Long Edged Inserts

Heavy Duty 90° Face Mills with 3M AXKT 1304.. Inserts 3M F90AX-13
Heavy Duty 90° Face Mills with 3M AXKT 1304.. Inserts

Heavy Duty 90° Face Mills with 3M AXKT 2006.. Inserts 3M F90AX-20
Heavy Duty 90° Face Mills with 3M AXKT 2006.. Inserts

Face Mills for Four Different Insert Contours FCM
Face Mills for Four Different Insert Contours

Face Mills for Machining Aluminum, with HM90 APCR 1605... Inserts HM90 FAL-16
Face Mills for Machining Aluminum, with HM90 APCR 1605... Inserts

90° Face Mills for Machining Aluminum at High Rotation Speed, Carrying Super Positive and Polished Rake Inserts HSM90S FAL-14
90° Face Mills for Machining Aluminum at High Rotation Speed, Carrying Super Positive and Polished Rake Inserts

Face Mills for Machining Aluminum, Carrying Inserts with Corner Radii Equal or Larger Than .197 HM90 FAL-16BR
Face Mills for Machining Aluminum, Carrying Inserts with Corner Radii Equal or Larger Than .197"

Face Mills for Machining Aluminum, with HM90 APCR 2206... Inserts HM90 FAL-22
Face Mills for Machining Aluminum, with HM90 APCR 2206... Inserts

90° Face Mills Carrying the H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-09
90° Face Mills Carrying the H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

90° Face Mills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-15
90° Face Mills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges

90° Face Mills Carrying the HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges HM390 FTP-10
90° Face Mills Carrying the HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges

90° Face Mills Carrying .708 P290 FPW
90° Face Mills Carrying .708" Long Edged Inserts




Terms of Use and Legal Disclaimer