ISCAR Main Banner ISCAR Main Banner
 Milling - Facing                    OPTIONS : Position the cursor on the picture for a description  

Multifunctional Endmills for Octagonal, Square and Round Insert Contours with Various Entry Angles SOE45 8/16
Multifunctional Endmills for Octagonal, Square and Round Insert Contours with Various Entry Angles

Multifunctional Face Mills for Octagonal, Square and Round Insert Contours with Various Entery Angles SOF45
Multifunctional Face Mills for Octagonal, Square and Round Insert Contours with Various Entery Angles

Heavy Duty 45° Face Mills, Carrying Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges SOF45-26
Heavy Duty 45° Face Mills, Carrying Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges

45° Face Mills Carrying Economical Inserts with 8 Helical Right-Hand Cutting Edges S845 F45SX-16
45° Face Mills Carrying Economical Inserts with 8 Helical Right-Hand Cutting Edges

45° Extra Fine Pitch Face Mills with Wedge Clamped Inserts, Carrying Square or Octagonal Inserts with 8/16 Cutting Edges SOF45CL
45° Extra Fine Pitch Face Mills with Wedge Clamped Inserts, Carrying Square or Octagonal Inserts with 8/16 Cutting Edges

45° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges F45NM
45° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges

45° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges F45WG
45° Face Mills, Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges

Face Mills, Carrying Square Inserts with 8 Cutting Edges IQ845 FSY-R07
Face Mills, Carrying Square Inserts with 8 Cutting Edges

45° Endmills, Carrying Octagonal or Round Inserts E45KT
45° Endmills, Carrying Octagonal or Round Inserts

45° Face Mills, Carrying Octagonal or Round Inserts F45KT
45° Face Mills, Carrying Octagonal or Round Inserts

Face Mills Carrying Octagonal, Round and High Feed Segmented Radius Inserts HOF
Face Mills Carrying Octagonal, Round and High Feed Segmented Radius Inserts

45° Screw Clamped Face Mills with SEK/MT 12... Inserts F45ST
45° Screw Clamped Face Mills with SEK/MT 12... Inserts

45° Screw Clamped Endmills with SEK/MT 12... Inserts F45ST (endmill)
45° Screw Clamped Endmills with SEK/MT 12... Inserts

90° Face Mills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-15
90° Face Mills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges

90° Face Mills Carrying the HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges HM390 FTP-10
90° Face Mills Carrying the HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges

90° Face Mills Carrying .708 P290 FPW
90° Face Mills Carrying .708" Long Edged Inserts

45° Endmills with SEKN/R 12... Inserts F45E (endmill)
45° Endmills with SEKN/R 12... Inserts

Face Mills Carrying Double-Sided Inserts with Six .250 H606 FR-.50
Face Mills Carrying Double-Sided Inserts with Six .250" Radius Cutting Edges

Face Mills Carrying Double-Sided Inserts with Six .236 H606 FR-12
Face Mills Carrying Double-Sided Inserts with Six .236" (6 mm) Radius Cutting Edges

45° Face Mills with SEKN/R 12... Inserts F45E
45° Face Mills with SEKN/R 12... Inserts

45° Face Mills with LN..1506... Tangentially Clamped Inserts F45LN-N15
45° Face Mills with LN..1506... Tangentially Clamped Inserts

65° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical Cutting Edges T465 FLN-22ST
65° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical Cutting Edges

Heavy Duty 45° Face Mills with 3M AXKT 2006... Inserts 3M F45AX-20
Heavy Duty 45° Face Mills with 3M AXKT 2006... Inserts

45° Face Mills with HM90 AD..-1505... Inserts F45AD
45° Face Mills with HM90 AD..-1505... Inserts

Heavy Duty 45° Endmills with 3M AXKT 2006... Inserts 3M E45AX-20
Heavy Duty 45° Endmills with 3M AXKT 2006... Inserts

Heavy Duty, 75° Face Mills with 3M AXKT 1304.../2006... Inserts 3M F75AX
Heavy Duty, 75° Face Mills with 3M AXKT 1304.../2006... Inserts

75° Endmills with AP..-1003... Inserts E75A
75° Endmills with AP..-1003... Inserts

75° Face Mills with HM90 AD..-1505... Inserts F75A
75° Face Mills with HM90 AD..-1505... Inserts

75° Face Mills with AP..-1003... Inserts F75AP
75° Face Mills with AP..-1003... Inserts

Fast Feed Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges FF EWX-M-04
Fast Feed Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges

Fast Feed Endmills with MULTI-MASTER Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges FF EWX-MM-04
Fast Feed Endmills with MULTI-MASTER Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges

Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges FF EWX-04
Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges

Moderate Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges MF FWX-05
Moderate Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges

Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges FF FWX-05
Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges

Fast Feed Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges FF EWX-M-05
Fast Feed Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with 6 Cutting Edges

Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges FF EWX-05
Fast Feed Endmills, Carrying Double-Sided Inserts with 6 Cutting Edges

Fast Feed Face Mills FF FW
Fast Feed Face Mills

43° Face Mills with 6 Cutting Edged Double-Sided Inserts F45WX-08
43° Face Mills with 6 Cutting Edged Double-Sided Inserts

Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges FF FWX-08
Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges

Moderate Feed Face Mills, Carrying Double-Sided Inserts with 6 Cutting Edges MF FWX-08
Moderate Feed Face Mills, Carrying Double-Sided Inserts with 6 Cutting Edges

Fast Feed Endmills with FF WOMT... Inserts FF EW
Fast Feed Endmills with FF WOMT... Inserts

Fast Feed Endmills with FLEXFIT Threaded Adaptation FF EW-M
Fast Feed Endmills with FLEXFIT Threaded Adaptation

Fast Feed Endmills with CLICKFIT Shanks FF EW-CF
Fast Feed Endmills with CLICKFIT Shanks

Fast Feed Milling Cutter, Multifunctional, for Octagonal and Square Insert Contours with Various Entery Angles FF SOF
Fast Feed Milling Cutter, Multifunctional, for Octagonal and Square Insert Contours with Various Entery Angles

Face Mills Carrying Double-Sided Inserts with Four .197 H400 FR-10
Face Mills Carrying Double-Sided Inserts with Four .197" (5 mm) Radius Cutting Edges

Endmills Carrying Double-Sided Inserts with Four .197 H400 ER-10
Endmills Carrying Double-Sided Inserts with Four .197" (5 mm) Radius Cutting Edges

Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with Four Radii Cutting Edges H400 ER-M
Endmills with FLEXFIT Threaded Connection, Carrying Double-Sided Inserts with Four Radii Cutting Edges

Endmills with MULTI-MASTER Threaded Connection, Carrying Double-Sided Inserts with Four Radii Cutting Edges H400 ER-MM
Endmills with MULTI-MASTER Threaded Connection, Carrying Double-Sided Inserts with Four Radii Cutting Edges

Face Mills Carrying Double-Sided Inserts with Four .236 H400 FR-12
Face Mills Carrying Double-Sided Inserts with Four .236" (6 mm) Radius Cutting Edges

Endmills Carrying Double-Sided Inserts with Four .236 H400 ER-12
Endmills Carrying Double-Sided Inserts with Four .236" (6 mm) Radius Cutting Edges

Face Mills Carrying Double-Sided Inserts with Four .315 H400 FR-16
Face Mills Carrying Double-Sided Inserts with Four .315" (8 mm) Radius Cutting Edges

Endmills with FLEXFIT Threaded Adaptation Carrying Round Inserts for Profiling and Milling of Round Corners ER-M
Endmills with FLEXFIT Threaded Adaptation Carrying Round Inserts for Profiling and Milling of Round Corners

Face Mills with Round Inserts for Profiling and Milling of Round Corners FR
Face Mills with Round Inserts for Profiling and Milling of Round Corners

Face Mills with Round Inserts for Profiling and Milling of Round Corners FR
Face Mills with Round Inserts for Profiling and Milling of Round Corners

Endmills with Round Inserts for Profiling and Milling of Round Corners ER
Endmills with Round Inserts for Profiling and Milling of Round Corners

Rough Profiling Endmills with Serrated or Regular Round Inserts ERW
Rough Profiling Endmills with Serrated or Regular Round Inserts

Rough Profiling Tools with a FLEXFIT Adaptation ERW-M
Rough Profiling Tools with a FLEXFIT Adaptation

Rough Profiling Tools with a MULTI-MASTER Adaptation ERW-MM
Rough Profiling Tools with a MULTI-MASTER Adaptation

Rough Profiling Face Mills with Serrated or Regular Round Inserts FRW
Rough Profiling Face Mills with Serrated or Regular Round Inserts

Face Mills for Four Different Insert Contours FCM
Face Mills for Four Different Insert Contours

Coarse Pitch Face Mills for Four Different Insert Contours FRCM
Coarse Pitch Face Mills for Four Different Insert Contours

90° Face Mills Using Tangentially Clamped Inserts with 4 Helical, .315 T490 FLN-08
90° Face Mills Using Tangentially Clamped Inserts with 4 Helical, .315" Long Cutting Edges

90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying Tangentially Clamped Inserts T490 ELN-MM..-08
90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying Tangentially Clamped Inserts

90° Endmills Using Tangentially Clamped Inserts with 4 Helical, .315 T490 ELN-08
90° Endmills Using Tangentially Clamped Inserts with 4 Helical, .315" Long Cutting Edges

90° Endmills with a FLEXFIT Threaded Adaptation Carrying Tangentially Clamped Inserts T490 ELN-M-08
90° Endmills with a FLEXFIT Threaded Adaptation Carrying Tangentially Clamped Inserts

90° Face Mills Using Tangentially Clamped Inserts with 4 Helical Long Cutting Edges T490 FLN-13
90° Face Mills Using Tangentially Clamped Inserts with 4 Helical Long Cutting Edges

90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, .490 T490 ELN-13
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, .490" Long Cutting Edges

90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, .490 T490 ELN-CF-13
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, .490" Long Cutting Edges with a CLICKFIT Adaptation

90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, .630 T490 FLN-16
90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, .630" Long Cutting Edges

90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, .630 T490 ELN-16
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, .630" Long Cutting Edges

Endmills with Tangentially Clamped Inserts T290 ELN-05
Endmills with Tangentially Clamped Inserts

Endmills with Tangentially Clamped Inserts and MULTI-MASTER Adaptation T290 ELN-MM-05
Endmills with Tangentially Clamped Inserts and MULTI-MASTER Adaptation

90° Face Mills with T290 LNMT 1004... Tangentially Clamped Inserts T290 FLN-10
90° Face Mills with T290 LNMT 1004... Tangentially Clamped Inserts

Endmills with Tangentially Clamped Inserts T290 ELN-10
Endmills with Tangentially Clamped Inserts

90° Face Mills with T290 LNMT 1506... Tangentially Clamped Inserts T290 FLN-15
90° Face Mills with T290 LNMT 1506... Tangentially Clamped Inserts

90° Face Mills with LN..1106... Tangentially Clamped Inserts F90LN-N11
90° Face Mills with LN..1106... Tangentially Clamped Inserts

90° Face Mills with LN..1506... Tangentially Clamped Inserts F90LN-N15
90° Face Mills with LN..1506... Tangentially Clamped Inserts

86° Face Mills Using all 8 Cutting Edges of LN..1506... Tangentially Clamped Inserts F86LNX-15
86° Face Mills Using all 8 Cutting Edges of LN..1506... Tangentially Clamped Inserts

86° Face Mills Carrying all 8 Cutting Edges of LN..1106... Tangentially Clamped Inserts F86LNX-11
86° Face Mills Carrying all 8 Cutting Edges of LN..1106... Tangentially Clamped Inserts

88° Face Mills Carrying Inserts with 8 Cutting Edges S890 FSN-13
88° Face Mills Carrying Inserts with 8 Cutting Edges

Face Mills for Machining Aluminum, with HM90 APCR 1605... Inserts HM90 FAL-16
Face Mills for Machining Aluminum, with HM90 APCR 1605... Inserts

90° Face Mills for Machining Aluminum at High Rotation Speed, Carrying Super Positive and Polished Rake Inserts HSM90S FAL-14
90° Face Mills for Machining Aluminum at High Rotation Speed, Carrying Super Positive and Polished Rake Inserts

Face Mills for Machining Aluminum, Carrying Inserts with Corner Radii Equal or Larger Than .197 HM90 FAL-16BR
Face Mills for Machining Aluminum, Carrying Inserts with Corner Radii Equal or Larger Than .197"

Endmills with Integral ER Collet Adaptation for Machining Aluminum HM90 EAL-ER
Endmills with Integral ER Collet Adaptation for Machining Aluminum

Face Mills with HM90 APCR 1505.. Inserts for Machining Aluminum HM90 FAL-15
Face Mills with HM90 APCR 1505.. Inserts for Machining Aluminum

Long Reach Endmills for Machining Aluminum, with HM90 AXCR 1505... Inserts HM90 EAL-15
Long Reach Endmills for Machining Aluminum, with HM90 AXCR 1505... Inserts

Face Mills for Machining Aluminum, with HM90 APCR 2206... Inserts HM90 FAL-22
Face Mills for Machining Aluminum, with HM90 APCR 2206... Inserts

Extended Flute Shell Mills for Machining Aluminum SM-22
Extended Flute Shell Mills for Machining Aluminum

90° Face Mills with HP ANKT 0702.. Inserts HP F90AN-07
90° Face Mills with HP ANKT 0702.. Inserts

90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying HELIPLUS HP ANKT 0702.. Inserts HP E90AN-MM-07
90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying HELIPLUS HP ANKT 0702.. Inserts

90° Face Mills with HM90 APKT 1003... Inserts HM90 F90AP-10
90° Face Mills with HM90 APKT 1003... Inserts

Endmills for HM90 AP.. 1003... Inserts HM90 E90A-10
Endmills for HM90 AP.. 1003... Inserts

Endmills using APKT/APKR-10.. inserts. E90A
Endmills using APKT/APKR-10.. inserts.

Endmills with a CLICKFIT Adaptation Carrying HM90 AP.. 1003... Inserts HM90 E90A-CF-10
Endmills with a CLICKFIT Adaptation Carrying HM90 AP.. 1003... Inserts

90° Face Mills with HM90 ADKT 1505... Inserts HM90 F90A-15
90° Face Mills with HM90 ADKT 1505... Inserts

90° Endmills for HM90 ADKT-1505... Inserts HM90 E90AD-15
90° Endmills for HM90 ADKT-1505... Inserts

90° Endmills with a CLICKFIT Adaptation for HM90 ADKT-1505... Inserts HM90 E90AD-CF-15
90° Endmills with a CLICKFIT Adaptation for HM90 ADKT-1505... Inserts

90° Face Mills with HP AD.. 1906... Long Edged Inserts HP F90AT-19
90° Face Mills with HP AD.. 1906... Long Edged Inserts

90° Endmills with HP AD.. 1906.. Inserts HP E90AT-19
90° Endmills with HP AD.. 1906.. Inserts

90° Face Mills with HP AD.. 2207... Long Edged Inserts HP F90AT-22
90° Face Mills with HP AD.. 2207... Long Edged Inserts

90° Endmills with HP AD.. 2207.. Inserts HP E90AT-22
90° Endmills with HP AD.. 2207.. Inserts

90° Endmills with a CLICKFIT Adaptation, with HP AD..2207.. Inserts HP E90AT-CF-22
90° Endmills with a CLICKFIT Adaptation, with HP AD..2207.. Inserts

90° Face Mills Carrying the H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-09
90° Face Mills Carrying the H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

90° Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 E90AX-09
90° Endmills Using H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

90° Face Mills Carrying Double-Sided Inserts with 4 Helical Cutting Edges H490 F90AX-12
90° Face Mills Carrying Double-Sided Inserts with 4 Helical Cutting Edges

90° Endmills Carrying H490 ANKX 12...Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 E90AX-12
90° Endmills Carrying H490 ANKX 12...Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-17
90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges

90° Endmills Carrying H490 ANKX 17... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 E90AX-17
90° Endmills Carrying H490 ANKX 17... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges




Terms of Use and Legal Disclaimer