ISCAR Cutting Tools
 Milling
 
  TANGSLOT
ISCAR's new line of slotting cutters has tangentially mounted inserts for strong yet narrow slotting cutters with a fine pitch. The specially designed inserts, designated LNET 12.. have positive, helical rake face chipformers that reduce cutting forces and power consumption by 15 to 25%. Their configuration results in minimal chattering and better tool life. In addition to breaking the chips, the chipformers also deflect chips away from the cut area, leaving the side surfaces unscratched.

These uniquely designed inserts have four cutting edges - two on each side, both right- and left-hand. They are recommended for general applications, especially on cast iron and steel. Special LNER12.. inserts for low-alloyed aluminum and stainless steel are available.

This combination of high precision inserts and tangential cutters provides increased productivity. TANGSLOT is available in 8 to 10 mm (.315 to .394") widths. Special 6.5 to 8 mm (.256 to .315") widths are available on request. The narrow cutters save workpiece material in slitting operations and are a very effective solution for narrow slots. They are recommended for parting applications at higher speeds with better quality for products such as bearing cups. 		 
TangSlot_938_2