Select Language
Čeština
Deutsch
English
Español-España
Français
Hrvatski
Italiano
Lietuvių
Magyar
Nederlands
Polski
Português
Slovenčina
Slovenščina
Suomi
Svenska
Türkçe
Ukrainian
Русский
中文
日本語
Home Page
Log In
Calculators
My Assemblies
Grades Guide
Search Path
New Search
Groove-Turn & Parting
ISO-Turning
Threading
Milling
Hole Making
Reaming
Boring
Tooling Systems
Modular Adaptations
Multifunction Tools
Search Results
* Use
%
as a wild card search character (CNMG
%
F3P) and
//
if items' specific grade is required (CNMG%F3P
//
IC8250)
Contains
Begins with
Ends with
Equals
By Family
By Product
By Grade Info
By Spare Part
By Brand Name
All
Groove-Turn & Parting
ISO-Turning
Threading
Milling
Hole Making
Reaming
Tooling Systems
Boring
Multifunction Tools
All
Loading
All
Insert
Tool
Solid tool
Holder
Accessories
Show New Products - Yes
Show New Products - No
PICCO/MG PCO (Holder)
Holders for PICCO-CUT Inserts and Small Diameter Boring Bars
GHIC-50
Boring Bars for Internal Grooving and Turning Blades, DMIN=1.96"
GHIC-70
Boring Bars for Internal Grooving and Turning Blades, DMIN=2.75"
GHIC-85
Boring Bars for Internal Grooving and Turning Blades, DMIN=3.35"
GHAR/L-8
External Holders for Grooving and Turning Adapters
HAI-C
Boring Bars with Coolant Holes for Internal Grooving and Turning Adapters
IHAXF
Brazed and Indexable Boring Bars for the MB Modular Boring System
IHAXF-AVI
Heavy Metal Vibration Damping Boring Bars
GHAIR/L-GE
Bars with Coolant Holes for Internal Grooving and Turning Adapters
IHAXF-E
Carbide Vibration Dampening Boring Bars
PLT
Cover Plate Protects the Serrated Faces When a Single Toolholder is Used
DT-BLANK
Dovetail Tool Blanks for Multi-Spindle Machines, for Special Profile Inserts
CA-R/L-LNET 12
Adjustable Cartridge for FDN/SDN-CALN 12 Full Slot Adjustable Slotting Cutters
CA90-R/L-LN11/15
Adjustable Cartridge for SDN and FDN-CALN11/CALN15
TS***
Drill Tubes - STS System - Inner Single-Start Thread Connection
TS-I**
Drill Tubes - STS System - Inner 2 or 4- Start Thread Connection
TS-O**
Drill Tubes - STS System - Outer Single-Start Thread Connection
TDO-I (D.725-2.56)
Double Tube Drill System with 4-Start Thread Connection Outer Tubes
TDO-I (D2.56-6.77)
Double Tube Drill System with 4-Start Thread Connection Outer Tubes
CAOD
Drilling / Boring / Trepanning Head Peripheral Cartridge
CAID
Drilling head Inner Cartridge
CAORC
Boring Head Central Cartridge
GP/GPB
Deep Drilling Head Guide Pads
MM ESB-G
Interchangeable Solid Carbide Ball Nose Blank Heads
SGP
Drilling Head Sub-Guide Pads
GPP
Drilling Head Guide Pad Protectors
GHAIR/L-GI
Bars with Coolant Holes for Internal Grooving and Turning Adapters
MAHR/L-JHP
Holders with High-Pressure Coolant Channels for MODULAR-GRIP Adapters
MAHPR/L-JHP
Holders with High-Pressure Coolant Channels for MODULAR-GRIP Perpendicularly Mounted Adapters
SD S-A-SP
Stepped Cylindrical Shanks for Interchangeable Solid Carbide Milling Heads
THBR/L/N-IQ
Blades Carrying Cartridges for Wide Grooving Inserts
BHDN
Broaching Holders for Lathe and Milling Machines
SD CAB
Adapters for Connecting SD Solid Carbide T-Slot Milling Heads and MULTI-MASTER Shanks
CA90 1723-R/L-T490-13
Adjustable Cartridge for SDN and FDN-CALN13
CA90 1928-R/L-PM15
Adjustable Cartridge for SDN and FDN-CAPM15 Slotting Cutters
JHP COPPER SEAL
High-Pressure Copper Seal
GHAR/L-JHP
Holders with High-Pressure Coolant Channels for Grooving and Turning Adapters
MAHR/L-MG-XL-JHP
Holders with High-Pressure Coolant Channels for Interchangeable Adapters
SBB
Holders for Small Diameter Metric (4-7 mm) Boring Bars
THMPR/L D45-JHP
Holders with High-Pressure Coolant Channels for Pentagonal TANG-GRIP Adapters
NMAHR/L-JHP
Holders with High-Pressure Coolant Channels Carrying MODU-GRIP Adapters
THMPR/L D22-JHP
Holders with High-Pressure Coolant Channels for Pentagonal SLIM-GRIP Adapters
SD FM-S-A-SP
Stepped Cylindrical Shanks for Interchangeable Solid Carbide Face Milling Heads
SW-C-D-JHP
Shanks for SGST Slim Slot Milling Disk Cutters
FLEXFIT HOLDER
FLEXFIT Threaded Modular Shank with 3 Flats for Side Clamping
AVC-D80-VH
Perpendicular Adaptor for External Square-Shank Tools
PICCO-N (Holder)
Holders for PICCO-JET Inserts with Inner Coolant Channels
MAHPR/L-XL-JHP
Holders with High-Pressure Coolant Channels for MODULAR-GRIP Perpendicularly Mounted Adapters
MM TC-G
Interchangeable Cemented Carbide Blank Heads
MM ESR BLANKS
Interchangeable Solid Carbide Blank Heads
MM ESR-1.5D BLANKS
Interchangeable Solid Carbide Blank Heads
NQCH-JHP
JETCUT Square Shanks for NEOSWISS Modular Heads intended for Swiss-Type Machines
MM CAB-T-T-W
MULTI-MASTER Shank Reducers
MAHR/L-JHP-MC
Holders with Bottom Inlets for High-Pressure Coolant Channels Carrying MODULAR-GRIP Grooving and Turning Adapters
SBTS##S-JHP
Spacer for Tool Extension for Height Adjustable Modular Back-End Machining System for Swiss-Type Machines
GPS-PLUS
Deep Drilling Solid Carbide Plus Size Guide Pads
NEO-SWISS DEMO KIT 2024
NEO-SWISS Demo Kit 2024
C#-Q3-SMXCR/L-SL
Safety Lock Tools with CAMFIX Shanks for High Feed Positive Inserts for Roughing Applications
PENTA 24N-J-SL
Five Cutting Edges for Parting and Grooving with Positive Rake Angle Clamped Onto Standard PENTACUT Holders.
GQIN
4 Cutting Edges Precision Grounded Inserts for Internal Grooving and Recessing Operations
HM390 FTP/D-JHP
90° JHP Face Mill with HM390 Triangular Inserts
AVC-PTLNR/L
Interchangeable Boring Heads Carrying 80° Rhombic Inserts
PCLXR/L-PAD-JHP
Lever Lock Adapter with High-Pressure Coolant carrying CXMG 80° Rhombic Inserts
TAG N-C (full radius)
Grooving and Slitting full radius inserts
D6NMG-F3P
Double-Sided Triangular Inserts with 55° Corner Angle and a Positive Rake Angle, for Finishing ISO-P Materials
D6NMG-M3P
Double-Sided Triangular Inserts with 55° Corner Angle and a Positive Rake Angle, for Semi-Finishing and Finishing ISO-P
D6NMG-M3M
Double-Sided Triangular Inserts with 55° Corner Angle and a Positive Rake Angle, for Semi-Finishing and Finishing ISO-M
PICCO PMC R/L
Inserts with Three Cutting Edges for Internal Turning and Chamfering
TGV N
Double Sided Tangential Insert for SWISS Type Machines, Intended for Grooving, Parting and Recessing Small Parts
Q3-SMXCR/L-SL-JHP
Safety Lock Tools on which High Feed Positive Inserts are Mounted for Roughing Applications.
Q3-SMXCN-SL-JHP
Safety Lock Tools on which High Feed Positive Inserts are Mounted for Roughing Applications.
Q3-MCMT-R3M-SL
High Feed Inserts with 3 Reinforced Cutting Edges and a Positive Flank.
Q3-MCMT-R3P-SL
High Feed Inserts with 3 Reinforced Cutting Edges and a Positive Flank.
TGVR/L-JHP
Grooving, Parting and Recessing Tools Carrying TGV Inserts with Channels for High-Pressure Coolant
CPV (CER)
Ceramic Precision Inserts for Grooving Multi V-Ribbed Pulleys
PCHR/L-24-JHP-QC
Grooving, Parting and Recessing Tools with Safety Lock Clamping for Five Cutting Edged Inserts
GIVR/L
Double-Edged Groove-Turn Inserts for Back Turning ,Undercutting and Profiling
PENTA 24N-C-SL
First Choice for The Parting of Bars, Hard Materials, and Tough Applications with a Negative Cutting Rake Angle
WCGX
Precision Ground Trigon Inserts for Modular MNC Drills
C#-Q3-SMXCN-SL-Y
Y-Axis Turning Tools with Safety Lock Clamping Mechanism for Positive Inserts, for Roughing and Medium Applications.
FFQ4 D-MM-06
Fast Feed Endmills with MULTI-MASTER Threaded Adaptation Carrying Single-Sided Square Inserts with 4 Cutting Edges
ECI-5-VF-CS
5 Flute Chip Splitter Endmill, Assorted Radii and Variable Pitch for Chatter Dampening.
S890 SNMU 1306HP
Double-Sided Square Inserts with 8 Cutting Edges
MDR ANMU PNTR
Double-Sided Rectangle Inserts with 2 Center Cutting Edges for Drilling and 2 Peripheral Cutting Edges for Milling
TJS M00 ST
High-Pressure Coolant Driven HSM Spindle with a Straight Shank for Small Diameter Cutting Tools
FFQ4 SOMT/W 0602
Single-Sided Square Inserts with 4 Cutting Edges for Fast Feed Milling
GCP (CER)
Straight Edge Grooving and Recessing Inserts for Machining Heat-Resistant Alloys
GCP-R (CER)
Full Nose Grooving & Turning Ceramic Inserts for Machining Heat-Resistant Alloys
T488 LNHU (CER)
Tangentially Clamped Ceramic Insert for Machining Gray and Ductile Iron
APCW 1604 (CER)
Radial Clamped Ceramic Insert Used for High-Speed Machining Gray and Nodular Cast Iron
SNGN-ZN (CER)
Radial Double-Sided Ceramic Face Milling Inserts Used for H igh-Speed Machining Gray and Nodular Cast Iron
SNGF (CER)
Radial Double-Sided Ceramic Face Milling Inserts with a Chipbreaker
SDCW (CER)
Ceramic Square Inserts for Machining Cast Iron
AVC-SVPCR/L
Interchangeable Boring Heads Carrying 35° Rhombic Inserts with 7° Clearance and 117.5 Approach Angle
AVC-SVQCR/L
Interchangeable Boring Heads Carrying 35° Rhombic Inserts with 7° Clearance and 107.5 Approach Angle
INDN AP AD
Tool Holder Adapter AP Unit
INDN AP DISC/SPLIT
Induction Coil Stop Disc AP Unit
INDN BS DISC
Induction Coil Stop Disc BS Unit
INDN BS AD HSK
Tool Holder Adapter BS Unit
INDN SETTING DISC
Height Setting Discs Inch
MM TS2-A
Double-Sided Cylindrical Shanks for Interchangeable Heads
SNGN-EN (CER)
Negative Square Double-Sided Ceramic Inserts for Machining Cast Iron, Hardened Steel and Heat-Resistant Alloys
SNGN-AN (CER)
Negative Square Double-Sided Ceramic Inserts for Machining Cast Iron, Hardened Steel and Heat-Resistant Alloys
AVC-DDMNR/L
Interchangeable Boring Heads Carrying 55° Rhombic Inserts
CNMX-M3P/R3P
Double-sided 80° Rhombic Inserts, Used for Railroad Wheel Re-turning.
SCLCR/L-PAD-JHP
Screw Lock Adapter with High-Pressure Coolant Mounts 80° Diamond Inserts with 7° Clearance Angle
VCGT (PCD)
Positive 35° Rhombic Inserts with PCD Top Corner Tip and Positive Rake for Finishing Non-Ferrous Materials
CXGG-M3N-P
CXGG 80° Double-Sided and Double-Positive Polished rhombic inserts
SBTH-JHP
Square Shank Tool Holders for Height Adjustable Modular Back-End Machining Systems for Swiss-Type Machines
PCLNR/L-PAD-JHP
Lever Lock Adapter with High-Pressure Coolant Mounts 80° Diamond Inserts
PDJNR/L-PAD-JHP
Lever Lock Adapter with High-Pressure Coolant Mounts 55° Diamond Inserts
HM90 F90AP-10-JHP
90° JHP Face Mills Carrying HELI2000 and HELIMILL Inserts
HM90 F90A-15-JHP
90° JHP Face Mills Carrying HELI2000 and HELIMILL Inserts
RNGN S (CBN)
Negative Round Type Solid CBN Inserts for Cast Iron Machining
CCGW W (CBN)
Positive 80° Rhombic Inserts with a CBN Top Corner Tip and Wiper for Hardened Steels and Cast Iron
CCGW 2MT MM (CBN)
Positive 80° Rhombic Inserts with 2 MM Chipbreaking CBN Mini Tips for Hardened Steel and Cast Iron
VCGT MD/RD (PCD)
Positive 35° Rhombic Inserts with MD/RD Chipbreaking PCD Tips for Non-Ferrous Materials Finishing & Medium App.
VCGW (CBN)
Positive 35° Rhombic Inserts with a Single CBN Tip and Flat Rake Angle for Hardened Steel and Cast Iron
VCGW (PCD)
Positive 35° Rhombic Inserts with a Single PCD Tip and Flat Rake Angle for Finishing Non-Ferrous Materials
VCGW 2MT (CBN)
Positive 35° Rhombic Inserts with 2 Single CBN Mini Tips for Hardened Steel and Cast Iron
VCGW MT (CBN)
Positive 35° Rhombic Inserts with a Single CBN Mini Tip for Hardened Steel and Cast Iron
VCGW MT (PCD)
Positive 35° Rhombic Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials
CPGT (PCD)
Positive 80° Rhombic Inserts with PCD Top Corner Tip and Positive Rake for Finishing Non-Ferrous Materials
CPGT R/L-L (PCD)
Positive 80° Rhombic Inserts with Full-Edge PCD Tip Positive Rake for Finishing Non-Ferrous Materials
CPGW (CBN)
Positive 80° Rhombic Inserts with CBN Top Corner Tip for Hardened Steel and Cast Iron
CPGW (PCD)
Positive 80° Rhombic Inserts with PCD Top Corner Tip for Finishing Non-Ferrous Materials
CPGW R/L-L (CBN)
Positive 80° Rhombic Inserts with Full-Edge CBN Tip (Right or Left Hand) for Hardened Steel and Cast Iron
CPGW R/L-L (PCD)
Positive 80° Rhombic Inserts with Full-Edge PCD Tip (Right or Left Hand) for Finishing Non-Ferrous Materials
DCGT (PCD)
Positive 55° Rhombic Inserts with PCD Top Corner Tip and Positive Rake for Finishing Non-Ferrous Materials
DCGT MD/RD (PCD)
Positive 55° Rhombic Inserts with MD/RD Chipbreaking PCD Tips for Non-Ferrous Materials Finishing & Medium App.
DCGW (CBN)
Positive 55° Rhombic Inserts with CBN Top Corner Tip for Hardened Steel and Cast Iron
DCGW (PCD)
Positive 55° Rhombic Inserts with PCD Top Corner Tip for Finishing Non-Ferrous Materials
DCGW 2MT (CBN)
Positive 55° Rhombic Inserts with 2 CBN Mini Tips for Hardened Steel and Cast Iron
DCGW 2MT MM (CBN)
Positive 55° Rhombic Inserts with 2 MM Chipbreaking CBN Mini Tips for Hardened Steel and Cast Iron
DCGW MT (CBN)
Positive 55° Rhombic Inserts with a Single CBN Mini Tip for Hardened Steel and Cast Iron
DCGW MT (PCD)
Positive 55° Rhombic Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials
DCGW W-2MT (CBN)
Positive 55° Rhombic Inserts with 2 CBN Mini Tips and Wiper for Hardened Steel and Cast Iron
DCGW W-MT (CBN)
Positive 55° Rhombic Inserts with a Single CBN Mini Tip and Wiper for Hardened Steel and Cast Iron
DCGW W-MT (PCD)
Positive 55° Rhombic Inserts with a Single PCD Mini Tip and Wiper for Finishing Non-Ferrous Materials
SNGN S (CBN)
Negative Square Solid CBN Inserts for Cast Iron Machining
GRIP-T
Utility Double-Ended Inserts for External, Internal and Face Machining
GDMT
Utility Double-Ended Inserts for Grooving and Turning
SPMT-FF
Insert with 4 Cutting Edges for Fast Feed Milling
RDS RNMU/RNMW
Double-Sided Round Inserts with 12 Cutting Edges for Profile Milling
XNMU 06
Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
DXJNR/L-X-JHP-MC
Rigid Clamp Tools with Channels for High-Pressure Coolant Carrying 70° Rhombic Inserts
SNMM-R4P
Single-Sided Square Inserts for Heavy Turning Applications on Steel
SNMG-R3P
Double-Sided Square Inserts with Chipformer for rough Machining
SDMT-FF
Insert with 4 Cutting Edges for Fast Feed Milling
BLR
Round Segment Double-Sided Inserts for Ball Nose Milling Cutters
NQCH-SER/L-JHP
Screw Lock JETCUT Modular Heads which Mount ISO Laydown Threading Inserts for Swiss-Type Machines
CCGT (PCD)
Positive 80° Rhombic Inserts with PCD Tip with a Positive Rake Angle for Finishing Non-Ferrous Materials
CCGT R/L-L (PCD)
Positive 80° Rhombic Inserts with Full-Edge PCD Tips (Right or Left Hand) for Finishing Non-Ferrous Materials
SBTT-SDNCN-JHP
Screw Lock JETCUT Modular Heads Mount 7° Clearance 55° Rhombic Inserts for Back-End Machining on Swiss-Type Machines
SBTT-SVVCN-JHP
Screw Lock JETCUT Modular Heads Mount 7° Clearance 35° Rhombic Inserts for Back-End Machining on Swiss-Type Machines
SBTT#-SVUCR/L-JHP
Screw Lock JETCUT Modular Heads Mount 7° Clearance 35° Rhombic Inserts for Back-End Machining on Swiss-Type Machines
SBTT#-SVQCR/L-JHP
Screw Lock JETCUT Modular Heads Mount 7° Clearance 35° Rhombic Inserts for Back-End Machining on Swiss-Type Machines
CCGT MD/RD (PCD)
Positive 80° Rhombic Inserts with 2 Types MD/RD Chipbreaking PCD Tips for Non-Ferrous Materials Finishing & Medium App.
SBTT#-SCLCR/L-JHP
Screw Lock JETCUT Modular Heads Mount 7° Clearance 80° Rhombic Inserts for Back-End Machining on Swiss-Type Machines
SBTT#-SDJCR/L-JHP
Screw Lock JETCUT Modular Heads Mount 7° Clearance 55° Rhombic Inserts for Back-End Machining on Swiss-Type Machines
SBTT#-SVJCR/L-JHP
Screw Lock JETCUT Modular Heads Mount 7° Clearance 35° Rhombic Inserts for Back-End Machining on Swiss-Type Machines
SBTT#-SVJBR/L-JHP
Screw Lock JETCUT Modular Heads Mount 5° Clearance 35° Rhombic Inserts for Back-End Machining on Swiss-Type Machines
SBTT#-16ER/L-JHP
Screw Lock JETCUT Modular Heads Mount ISO Laydown Threading Inserts for Back-End Machining on Swiss-Type Machines
CCGW (CBN)
Positive 80° Rhombic Inserts with CBN Tips with a Flat Rake Angle for Hardened Steel and Cast Iron
CCGW (PCD)
Positive 80° Rhombic Inserts with PCD Tips with a Flat Rake Angle for Finishing Non-Ferrous Materials
CCGW R/L-L (CBN)
Positive 80° Rhombic Inserts with Full-Edge CBN Tips (Right or Left Hand) for Hardened Steels and Cast Iron
CCGW R/L-L (PCD)
Positive 80° Rhombic Inserts with Full-Edge PCD Tips (Right or Left Hand) for Finishing Non-Ferrous Materials
CCGW W (PCD)
Positive 80° Rhombic Inserts with a PCD Top Corner Tip and Wiper for Finishing Non-Ferrous Materials
TJS M90 ST
High-Pressure Coolant Driven HSM Spindle with a Straight Shank for Small Diameter Cutting Tools
NQCH-SCHR/L-BF-JHP
Screw Lock JETCUT Modular Heads Carrying SWISSCUT Inserts for Grooving and Turning on Swiss-Type Machines
NQCH-Y-SCHR-BF-JHP
Screw Lock JETCUT Modular Heads Carrying SWISSCUT Inserts for Grooving and Turning in Y-Axis on Swiss-Type Machines
NQCH-SWLNR/L-S-JHP
Screw Lock JETCUT Modular Heads Carrying Positive Double-Sided Trigon Inserts for Swiss-Type Machines
DCGT-F1M-20P
55° Rhombic Inserts with a 7° Positive Flank for Semi-Finish and Finish Turning on Soft Materials and High-Temp. Alloys.
VCGT-F1M-20P
35° Rhombic Inserts with a 7° Positive Flank for Semi-Finish and Finish Turning on Soft Materials and High-Temp. Alloys.
EBI-6-VF
6 Flute, Ball Nose Endmills With and Without Relieved Necks
ECI-6-VF
6 Flute Endmill With and Without Relieved Neck, Assorted Radii and Variable Pitch for Chatter Dampening
FFX4 XNMU-08
"Bone Shaped" Inserts with 4 Cutting Edges for Fast Feed Milling
ECI-7-VF
7 Flute Endmill With and Without Relieved Neck, Assorted Radii and Variable Pitch for Chatter Dampening
GRIPA
Ground Double-Ended Inserts for External, Internal and Face Machining
GRIPA (full radius)
Ground Double-Ended Full Radius Inserts for External, Internal and Face Machining
DCGT-F1M-12P
55° Rhombic Inserts with a 7° Positive Flank for Finish Turning on Soft Materials and High-Temp. Alloys.
VCGT-F1M-12P
35° Rhombic Inserts with a 7° Positive Flank for Finish Turning on Soft Materials and High-Temp. Alloys.
MM CONNECTION KIT
MM CONNECTION KIT
XNMG-F3P
Double-Sided 70° Rhombic Inserts for Semi-Finishing and Finishing Applications
XNMG-M3P
Double-Sided 70° Rhombic Inserts for Medium Machining Conditions on Steel
XNMG-F3M
Double-sided 70° Rhombic Inserts for Stainless Steel Finishing Applications
XNMG-M3M
Double-Sided 70° Rhombic Inserts for Machining Stainless and Low Carbon Steel
ECI-5-VF
5 Flute Endmill With and Without Relieved Neck, Assorted Radii and Variable Pitch for Chatter Dampening
EBI-5-VF
5 Flute, Ball Nose Endmills With and Without Relieved Necks
AVC-GEAIR/L
Internal Grooving, Turning and Threading Adapters
AVC-GAIR/L
Internal Grooving Turning and Threading Adapters
SHIM GPS
Shims for GPS Pads
HM90 E90AD-M-15-JHP
90° JHP Endmills With a FLEXFIT Threaded Adaptation Carrying HELI2000 and HELIMILL Inserts
TNF GN-IQ
Face Grooving Single-Ended Inserts for Machining Steel
FFQ8 SZMU
Double-Sided Square Inserts with 8 Cutting Edges for High Feed Milling
HCT-QF
Taper Barrel-Shaped Inserts with 2 Cutting Edges
HLB-QF
Combined Barrel and Lens-shaped Inserts with 2 Cutting Edges
HM390 TDCR 1505
Triangular Inserts with 3 Helical Cutting Edges for 90° Shoulder Accuracy
S890 SZMU-0804PN
Double-Sided Square Inserts with 8 Cutting Edges
S890 FSZ-R08
Face Mills Carrying Square Double-Sided Inserts with 8 Cutting Edges
PENTA 17R/L-SP-RS
Pentagonal Inserts (5 edges) with a High Positive Rake for Parting Soft Materials
ETS-XN09
T-SLOT Endmills Carrying XNMU 0904 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
PICCO-620-N (Face Grooving Along Shaft)
Inserts with Internal Coolant Channel for Grooving Along Shaft Dmin .236"
FRN
Face Mill for Wedge-Clamped Double-Sided Round Inserts
XNMU 09
Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
PICCO R 050.20-N (Turning)
Inserts with Inner Coolant Channel for Internal Turning and Chamfering Next to the Bottom of Blind Holes
PENTA 17R/L-P-RS
Lead Angle Edge Pentagonal Inserts (5 edges) for Parting Miniature Parts
EBI-4-VF
4 Flute Ball Nose Endmills With and Without Relieved Necks
H690 EWN-04
90° Endmills Carrying H690 WNMU 0403 Double-Sided Trigonal Inserts with 6 Helical Cutting Edges
H690 WNMU 0403
Trigonal Inserts with 6 Helical Cutting Edges for 90° Shoulder Milling
Thread anvils EL/IR
Thread Anvils for External Left & Internal Right
Thread anvils ER/IL
Thread Anvils for External Right & Internal Left
RPHX/RPMX
Round Milling Inserts with Specially Shaped Indexing Grooves
GFT-C
Thin Parting, Grooving & Slitting Single-Ended Inserts for Soft Materials
PICCO ACE-N
Holders for PICCO-JET Inserts with Inner Coolant Channels
PICCO R/L 047-N
Inserts with Inner Coolant Channel for Internal Deep Profiling
TJS HPC CAT
High Pressure Coolant Driven HSM Spindle with CAT Shank for Small Diameter Cutting Tools
SNMG-F3S
Double-Sided 90° Rhombic Inserts for Titanium and Heat Resistant Materials for Finishing Applications
HSM90S APCR 2207
Super Positive Inserts with a Polished Rake for Machining Aluminum at High Rotational Speed
PENTA 17-P-RS/LS (full radius)
Precision Grooving Pentagonal Full Radius Inserts for Soft Materials
HSM90S FAL-22
90° Face Mills Carrying Super Positive and Polished Rake Inserts for Machining Aluminum at High Rotation Speeds
HSM90SFD-HSK80FM-22
Endmill with Integral HSK FM Type Shanks for Makino Machine Models MAG Series A Flange-Pin Spindles for Milling Aluminum
DCGT-F2M
55° Rhombic Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
VCGT-F2M
35° Rhombic Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
E90SO-MM-04
Endmills with a MULTI-MASTER Connection Carrying Inserts for Shouldering and Fast Feed Applications
FFX4 XNMU/W-04
"Bone Shaped" Inserts with 4 Cutting Edges for Fast Feed Milling
TR6 ER
Multifunction Endmills That Carry Four Different Insert Geometries
TR6 FR
Multifunction Face Mills That Carry Four Different Insert Geometries
TAG N-HF
Single-Ended Inserts for High Feed Parting and Grooving, Hard Materials and Tough Applications
SOMT 0402-FF
Square Milling Inserts for Fast Feed Milling
FFV-D-R-VN07
Fast Feed Shell Mill Carrying Tangentially Clamped Inserts with 4 Cutting Edges
PENTA 17-NP-RS/LS
Pentagonal Inserts for Precision Grooving and Turning Next to High Shoulder Applications
VNGU-R3N
Double-Sided Sharp Edged Positive Rake Inserts for Rough Machining Aluminum and Other Non-Ferrous Materials
DDJNR/L-JHP-MC
Rigid Clamp Tools with Channels for High-Pressure Coolant Carrying 55° Rhombic Inserts
HM390 TPKR 0401
Triangular Miniature Inserts with 3 Helical Cutting Edges for 90° Shoulders
HM390 TPKT/CT 0502
Triangular Inserts with 3 Helical Cutting Edges for 90° Shoulder Accuracy
DCLNR/L-JHP-MC
Rigid Clamp Tools with Channels for High-Pressure Coolant Carrying 80° Rhombic Inserts
DWLNR/L-JHP-MC
Rigid Clamp Tools with Channels for High Pressure Coolant Carrying the 80° Trigon Inserts
FFT3 EFM-MM 03
Endmills with a MULTI-MASTER Threaded Adaptation Carrying Single-Sided Small Trigon Inserts for Fast Feed Milling
FFT3 WXMT 03
Single-Sided Small Trigon Inserts for Fast Feed Milling
E90SO-04
Endmills Carrying Square Inserts for Shouldering and Fast Feed Milling Applications
FFT3 EFM-MM 02
Small Diameter Endmills with a MULTI-MASTER Threaded Adaptation that Mount Triangular Inserts for Fast Feed Milling
FFT3 TXMT 02
Triangular Miniature Inserts for Fast Feed Milling at Small Depths of Cut
SOMT/CT 0402
Square Milling Inserts for General Use
PENTA 17-ER/EL
Back Turning Pentagonal Inserts for Short Chipping Materials
PENTA 17-MT-RS/LS
Precision Ground Pentagonal External Threading Inserts with a 60° Partial Profile for General Applications
PENTA 17-WT-RS/LS
Precision Ground Pentagonal External Threading Inserts with a 55° Partial Profile for General Applications
GFT-J
Thin Parting, Grooving and Slitting Single-Ended Inserts for Soft Materials
SCHR/L-41BF
Grooving and Turning Tools with Back and Front Clamping for Swiss-Type and Automatic Machines
SCIR/L-41-AD
Turning Inserts
TR6 TNCU/MU
Double-Sided Inserts with Six Round Cutting Edges, Available in .0197 up to .1181" Corner Radii
TR90 TXMT
Single-Sided Insert with Three Cutting Edges for 90° Shoulder and Face Milling
TRFF TXMT
Single-Sided Insert with Three Cutting Edges for High Feed Machining
TR45 TXMT
Single-Sided Inserts with Three Cutting Edges for 45° Chamfering and Face Milling
TR6 ER-M
Multifunction Endmills with FLEXFIT Threaded Adaptation That Carry Four Different Insert Geometries
GIMT
Utility Single-Ended Inserts for Grooving and Turning
T490 LNMT 1306PNR-FF
Tangentially Clamped Inserts with 2 Cutting Edges for Fast Feed Milling
MEFL
Screw-Clamped Inserts for External Face Grooving and Turning Next to Shafts
T490 LNMT 1306PNTR-FW
Tangentially Clamped Inserts with 4 Serrated and Helical Cutting Edges
MM ET
Solid Carbide Tapered Heads with 20/30° Helix, Variable Pitch and Coolant Holes for CHATTERFREE Finishing Operations
INRD-R/L
Precision, Single-Ended Full Radius Deep Grooving Inserts with a Flat Rake
MF FHX-R06
34° Face Mills Carrying Hexagonal Inserts with 12 Cutting Edges
H690 EWN-07
90° Endmills Carrying H690 WNMU 0705 Double-Sided Trigonal Inserts with 6 Helical Cutting Edges
MM EC-H-4-CF
Interchangeable Carbide Endmill Heads for CHATTERFREE Milling Alloyed Steel
PICCO R/LX050
Reinforced Boring Inserts with Internal Coolant Holes
SCHR/L-22BF-JHP
Grooving and Turning Tools with High-Pressure Coolant Channels for Swiss-Type and Automatic Machines
GPS
Deep Drilling Solid Carbide Guide Pads
SCMT-F3M
Square Positive Flank Inserts for Stainless Steel Finishing Applications
VCMT-F3M
35° Rhombic Positive Flank Inserts for Stainless Steel Finishing Applications
SCMT-M3P
Square Positive Flank Inserts for Medium Machining Conditions on Steel
H690 WNHU/WNMU 0705
Trigonal Inserts with 6 Helical Cutting Edges for 90° Shoulder Milling
MM S-A-C#
MULTI-MASTER Threaded Connection Shanks with a CAMFIX (ISO 26623-1) Exchangeable Adaptation
EPGT-F1P
75° Rhombic Inserts with a Positive Flank for Very Low Finish Turning Conditions on Steel
A/E-SEXPR/L-03
Screw Lock Boring Bars Carrying 75° Rhombic Inserts with 11° Clearance for .177" Minimum Bore Diameter
VCGT-(PCD)
35° Rhombic Single Brazed Tip Corner Inserts for Aluminum Finishing (PCD)
DNGP-F2M
Double-Sided 55° Rhombic Inserts for Semi-Finishing and Finishing on Stainless Steel
DNGP-F2P
Double-Sided 55° Rhombic Inserts for Semi-Finishing and Finishing Applications on Alloyed Steel
A/E-SDXNR/L-07
Boring Bars Carrying DNGP 22.. Double-Sided 55° Rhombic Inserts for Small Diameters
A/E-SDZNR/L-07
Back Turning Boring Bars Carrying DNGP 22.. Double-Sided 55° Rhombic Inserts for Small Diameters
CNMG-VL
Double-Sided 80° Rhombic Inserts with a Chipformer for High Temperature Alloys and Stainless Steel Valves
HM390 TDKT 1907
Triangular Inserts with 3 Helical Cutting Edges for 90° Shoulder Accuracy
T490 LNMT/LNHT 1106
Tangentially Clamped Inserts with 4 Helical Cutting Edges
PENTA 24N-C
Inserts with 5 Cutting Edges for Parting and Grooving Bars, Hard Materials and Tough Applications
PENTA 24N-C (full radius)
Full Radius Grooving Inserts with 5 Cutting Edges for Hard Materials and Tough Applications
PCHR/L-34-JHP
Grooving, Parting and Recessing Tools Carrying PENTA Inserts with Channels for High-Pressure Coolant
GEMI (full radius)
Utility Double-Ended Full Radius Inserts for Internal and External Grooving and Profiling
FF VNMT 0706
Tangentially Clamped Inserts with 4 Cutting Edges for Fast Feed Milling
SCIR/L-22-AD
Turning Inserts with a Front Relief Angle
FFQ4 SOMT/W 1205
Single-Sided Square Inserts with 4 Cutting Edges for Fast Feed Milling
ACME THREADING FLA-PT-I
Double-Ended, Precision, Flat Top Internal Threading Inserts
STUB ACME THREADING FLAS-PT-I
Double-Ended, Precision, Flat Top on Internal Threading Inserts
API BUTTRESS THREADING FLDC-B-I
Double-Ended, Precision, Flat Top Threading Inserts
API THREADING FLDC-I
Double-Ended, Precision, Flat Top Threading Inserts
NPT THREADING FLDC-NPT-I
Double-Ended, Precision, Flat Top Multi-Tooth Threading Inserts
UN THREADING FLTC-I
Double-Ended, Precision, Flat Top Full Profile Threading Inserts
COMM-R3P-IQ
Single-Sided 7° Negative Side Flank 80° Rhombic Inserts for Heavy Turning of Steel
SNMG-R3M
Double-Sided 90° Square Inserts for Rough Machining on Stainless and Low Carbon Steel
TNMG-FFG-CERMET
Double-Sided Triangular Inserts for Semi-Finishing and Finishing Applications on Steel and Cast Iron
VNMG-FNF-CERMET
Double-Sided 35° Rhombic Inserts for Semi-Finishing and Finishing Applications
DCMT-CERMET
Single-Sided 55° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications
CCMT-CERMET
Single-Sided 80° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications
VCMT-FPC-CERMET
35° Rhombic 7° Cermet Positive Flank Inserts for Semi-Finishing Turning of steel and Automotive Components
TPMR-FTF
Triangular 11° Positive Inserts with a Positive Chipformer Exerting, Low Cutting Forces for Finish Turning Applications
MT TNCT-U55
55° Partial Profile Laydown U-Type Thread Milling Inserts, for General Industry
MT TNCT-U60
60° Partial Profile Laydown U-Type Thread Milling Inserts, for General Industry
IHSR-MIFR
Trepanning Cartridges Carrying MINCUT Inserts Mounted on a BHR MB32-32X63 Boring Head
T890 LN.. 1306
Tangentially Clamped Inserts with 4 or 8 Cutting Edges
PENTA 24N-PF (full radius)
Full Radius Pentagonal Inserts with a High Positive Flat Rake for Parting and Precision Grooving
FFQ4 SOMT/W 0904
Single-Sided Square Inserts with 4 Cutting Edges for Fast Feed Milling
FFQ4 SOMT/W 1706
Single-Sided Square Inserts with 4 Cutting Edges for Fast Feed Milling
CCMT-F3P
80° Rhombic Positive Flank Inserts for Semi-Finishing and Finishing Turning of Steel
DCMT-F3P
55° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Steel
VCMT-F3P
35° Rhombic Positive Flank Inserts for Semi-Finishing and Finish Turning of Steel
SCMT-F3P
Square Positive Flank Inserts for Semi-Finishing and Finish Turning of Steel
MM S-A-HSK
MULTI-MASTER Threaded Connection Shanks with an Integral HSK DIN 69893 Form A Tapered Adaptation
GDV
Shanks for SUMOGUN Modular Gundrills with Threaded Connection
EPNI-F
Solid Endmills with a Special Edge Configuration for Machining Different Composite Materials
MT3-55D
55° Partial Profile Laydown Thread Milling Inserts for General Industry
MT3-60D
60° Partial Profile Laydown Thread Milling Inserts for General Industry
MT3-U55D
55° Partial Profile Laydown U-Type Thread Milling Inserts for General Industry
HFPN
Utility Double-Ended Face Machining Inserts
SNMG-M3P
Double-Sided Square Inserts for Medium Machining Conditions on Steel
MINCUT KIT
Contains One Toolholder and a Set of 6 Different Inserts for Internal Face Grooving and Turning Applications
LNAT 1506-PM
Tangentially Clamped Inserts with 4 Cutting Edges for Slotting Cutters
HM390 TCKT/CT 0703
Triangular Inserts with 3 Helical Cutting Edges for 90° Shoulder Accuracy
RPG (CER)
Positive Round Ceramic Inserts for Machining Cast Iron and Heat-Resistant Alloys
PDJCR/L-JHP
Lever Lock Tools with Channels for High Pressure Coolant for 55° Positive Rhombic Inserts for Swiss Automatic Machines
INR/INRP-R/L
Precision Double-Ended Flat Top Round Grooving Inserts
PCBOR/L-IQ
Lever Lock and Dovetail Pocket Rigid Clamping Tools Carrying Unique Double-Sided 80° Rhombic Inserts
PSBOR/L-IQ
Lever Lock and Dovetail Pocket Rigid Clamping Tools Carrying Unique SOMG Double-Sided Square Inserts
PSDON-IQ
Lever Lock and Dovetail Pocket Rigid Clamping Tools Carrying Unique Double-Sided Square Inserts
TAG N-LF
Single-Ended Inserts for Parting, Grooving and Slitting Stainless Steel
TAG N-MF
Single-Ended Inserts for Parting Grooving and Slitting Stainless and Alloy Steel at Medium Feed
DGN-MF
Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds
TNF-P-IQ
Face Grooving Single-Ended Inserts for Machining Steel
COMG-R3P-IQ
Double-Sided 7° Negative Side Flank 80° Rhombic Inserts for Heavy Turning of Steel
SOMG-R3P-IQ
Double-Sided 7° Negative Side Flank Square Inserts for Heavy Turning on Steel
SNMM-R3P
Single-Sided Square Inserts for Rough Turning Applications on Steel
PENTA 24-ISO
Precision Ground ISO Metric Full Profile Pentagonal External Threading Inserts with a Chipformer
PENTA 24-UN
American UN (UNC, UNF, UNEF) Precision Ground Full Profile Pentagonal External Inserts with a Chipformer
PENTA 24-W
Whitworth (BSW, BSF, BSP) B.S.84-1956 DIN 259 Pentagonal Full Profile External Threading Inserts with a Chipformer
PENTA 24-BSPT
BSPT (British Standard Pipe) Precision Ground External Pentagonal Full Profile Threading Inserts with a Chipformer
PENTA 24-NPT
NPT (National Pipe Threads) Precision Ground Pentagonal External Full Profile Threading Inserts with a Chipformer
H606 RXCU 43
Double-Sided Inserts with Six .250" Radius Cutting Edges, for Profile Milling
PENTA 24-WT
Precision Ground Pentagonal External Threading Inserts with a Whitworth 55° Partial Profile
PENTA 24-MT
Precision Ground Pentagonal External Threading Inserts with a 60° Partial Profile for General Applications
SNMG-F3P
Double-Sided Square Inserts for Semi-Finishing and Finishing on Steel
SCHR/L-22BF
Grooving and Turning Tools with Back and Front Clamping for Swiss-Type and Automatic Machines
HM390 TDKT/CT 1505
Triangular Inserts with 3 Helical Cutting Edges for 90° Shoulder Accuracy
TNF-M-IQ
Face Grooving Single-Ended Inserts for Machining Stainless Steel and High Temperature Alloys
XNMU 13
Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
HM390 TPKT/CT 1003
Triangular Inserts with 3 Helical Cutting Edges for 90° Shoulder Accuracy
H690 TNKX 1606
Triangular Inserts with 6 Helical Cutting Edges for 90° Shoulders
H606 RXCU 1206
Double-Sided Round Inserts with Six Cutting Edges for Profile Milling
P290 ACKT
Single-Sided Rectangular Inserts with 2 Serrated Cutting Edges
P290 ACCT/KT
Single-Sided Rectangular Inserts with Two .472 and .708" Straight Cutting Edges
RXMT 1607
Round Milling Inserts
DGN-LF/LFT
Double-Sided Inserts for Parting and Grooving Stainless Steel
H490 ANKX 0904-FF
Double-Sided Rectangular Inserts with 4 Helical Cutting Edges for Fast Feed Milling at Small Depths of Cut
SCMT-M3M
Square Positive Flank Inserts, for Machining Stainless and Low Carbon Steel
VCMT-M3M
35° Rhombic Positive Flank Inserts for Machining Stainless and Low Carbon Steel
CCMT-M3M
80° Rhombic Positive Flank Inserts for Machining Stainless and Low Carbon Steel
SNMG-M3M
Double-Sided Square Inserts with a Special Chipformer for Heavy Machining
GAIR/L
Internal Grooving and Turning Adapters
FGPAM
V-Shaped Inserts for Machining Aluminum Wheels
SCLCR-PAD
Screw Lock Adapter Carrying 80° Diamond Inserts with 7° Clearance Angle
ST-MB
MB Modular Connection System with Straight Cylindrical Shanks
DCMT-M3M
55° Rhombic Positive Flank Inserts for Machining Stainless and Low Carbon Steel
DCNS-3D
Drill Body with Exchangeable Heads, without Flange, One Flat Shank, Drilling Depth 3xD, Suitable for Chamfering Holders
DCNS-5D
Drill Body with Exchangeable Heads, without Flange, One Flat Shank, Drilling Depth 5xD, Suitable for Chamfering Holders
GINI-E
Precision Double-Ended Inserts for Internal Grooving and Turning of Ductile Materials
PICCO ACE
Holders for PICCO-CUT Inserts
RGP
Boring Head Resin Pads
IR/L-NPTF
Internal NPTF (National Pipe Threads) Full Profile Laydown Threading Inserts, for Steam, Gas and Water Pipes
APKT 1003-FF
Insert for Fast Feed Milling
MM CAB-T-T
MULTI-MASTER Shank Extensions
GIP (flat top W<M)
Flat Top Precision Double-Ended Inserts for Grooving
GIP (full radius W<M)
Flat Top Precision Double-Ended Inserts with Full Radius for Grooving
S845 SXHU 1606-W
HELIDO Wiper Insert with a Single Cutting Edge
PENTA 24N-PF/P
Pentagonal Inserts with a High Positive Flat Rake for Parting and Precision Grooving
TAG N-UT
Single-Sided Inserts for Parting, Grooving & Slitting at Low Feeds on Cr-Ni Alloys, Ductile Materials & Low Carbon Steel
TAGB/TAGBA
Single-Ended Utility Inserts for Grooving, Turning and Parting
MM TS-A
Cylindrical Shanks Mount Interchangeable Milling Heads
S865 SNMU 1305ZNTR
Double-Sided Square Inserts with 8 Cutting Edges
GIM-J-RA/LA
Utility Single-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes and Small Diameters
GIM-W-RA/LA
Single-Sided Screw-Clamped Inserts with Central Ridged Chipformer for Parting Alloy Steel
GIM-UT-RA/LA
Single-Ended Screw-Clamped Inserts for Parting at Low Feeds on CrNi Alloys and Low Carbon Steel
TAG N-A
Single-Ended Inserts for Parting, Grooving and Slitting Aluminum
H400 RNHU
Double-Sided Inserts with Four .197, .236 and .315" Radii Cutting Edges for Profile Milling
A-PWLNR/L-X/G
Lever Lock Boring Bars with Coolant Holes Carrying HELITURN LD WNMX or WNMG Trigon Inserts
H490 ANKX/ANCX 1205-FF
Single-Sided Rectangular Inserts with 2 Helical Cutting Edges for Fast Feed Milling at Small Depths of Cut
CCGW/CCMW-2 (CBN)
80° Positive Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys
DCGW/DCMW-2 (CBN)
55° Positive Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys
TPGW-M3 (CBN)
Triangular Positive Inserts with 3 CBN Tips for Machining Sintered Metals and High Temperature Alloys
C#-EM
DIN 1835 Form B Weldon Endmill Holders with CAMFIX (ISO 26623-1) Exchangeable Tapered Shanks
T465 LNHT/LNMT 2212
Tangentially Clamped Inserts with 4 Cutting Edges for 65° Cutters
FTP LNHT 1006
Tangentially Clamped Inserts with 4 Cutting Edges for Plunging and Fast Feed Facing
T490 LNAR-P
Tangentially Clamped Precision Ground Inserts with a Super Positive Rake for Machining Aluminum
MM EFF
4, 6 Flute Solid Carbide Heads for Milling at Very Fast Feeds and Small D.O.C.
MM S-ER-H
Shanks that Mount MULTI-MASTER Solid Carbide Heads with an ER Collet Adaptation and Coolant Holes
PENTA 24N-Z
Inserts with 5 Cutting Edges for Grooving and Parting Tubes, Small and Thin-Walled Parts
HTP LN.. 0604
Tangentially Clamped Inserts with 4 Cutting Edges for Plungers
CNMM-H3P
Single-Sided 80° Rhombic Insert with a Strong Cutting Edge for Extra Rough Turning
MM S-A (straight shanks)
Shanks Mount Interchangeable Milling Heads
MM S-D (89° conical shanks)
Shanks Mount Interchangeable Milling Heads
HTP LN.. 1006
Tangentially Clamped Inserts with 4 Cutting Edges for Plungers
S845 SNMU/SNHU-13
Double-Sided Square Inserts with 8 Cutting Edges
3M AXKT-2006
High Durability Inserts for Heavy Milling Applications
3M AXKT 2006..R-PDR
High Durability Inserts with a Variety of Corner Radii for Heavy Milling
H490 ANKX 1706-FF
Single-Sided Rectangular Inserts with 2 Helical Cutting Edges for Fast Feed Milling at Small Depths of Cut
T290 LNMT/LNHT 0502
Tangential Inserts with 2 Cutting Edges
GFF-N
Face Grooving Inserts
VCGT-DW (PCD)
Inserts with 7° Clearance and a Single PCD Top Corner Tip Chipformer for Machining Aluminum
ADKT 1505-FF
Inserts for Fast Feed Milling
GIPI (full radius)
Precision Double-Ended Full Radius Inserts for Internal Grooving and Recessing
GIFI-E (full radius)
Precision Double-Ended Full Radius Inserts for Internal Profiling and Grooving
PENTA 24N-J (full radius)
Precision Grooving Pentagonal Full Radius Inserts for Soft Materials
GIMY (full radius)
Utility Single-Ended Inserts for Grooving and Profiling
GIMN
Utility Single-Ended Inserts for Grooving and Turning Ductile Materials
ER-NPTF
External NPTF (National Pipe Threads) Full Profile Laydown Threading Inserts, for Steam, Gas and Water Pipes
GIF-E (W=.157-.236 radius)
Precision Double-Ended Full Radius Inserts for Profiling and Grooving
GIF-E (W=.315,.394 full radius)
Precision Double-Ended Full Radius Inserts for Profiling and Grooving
GITM (full radius)
Full Radius CBN Tipped Inserts for Grooving and Turning on Hard Ferrous Materials
GDMY (full radius)
Utility Double-Ended Full Radius Inserts for Grooving and Profiling
GIP (full radius)
Precision Double-Ended Full Radius Inserts for Grooving
GIP-E (full radius)
Precision Double-Ended Full Radius Inserts for Profiling and Grooving
CCMT (PCD)
Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Aluminum Finishing
DCMT (PCD)
55° Rhombic Inserts with a PCD Single Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Applications
HFPR/L (full radius)
Utility Double-Ended Full Radius Face Machining Inserts
C#-CF4 (CLICKFIT)
CLICKFIT Modular Connections with CAMFIX (ISO 26623-1) Exchangeable Tapered Shanks
HM90 APCR 220605-CS
Chip Splitting Insert for Rough Milling of Aluminum
H600 WXCU
Double-Sided Inserts with 6 Cutting Edges for Fast Feed Machining
GIMM 8CC
Single-Ended Utility Insert with a Front Chip Splitter for External Rough Grooving and Side Turning
DCET-WF
55° Rhombic Wiper Inserts for Finishing Operations at High Feeds
CCET-WF
80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
HCM-MM
Ball Nose Multifunction Endmills with a MULTI-MASTER Threaded Adaptation
HM90 ADKW 1505PDR
Milling Inserts for Unfavorable Conditions and Heavy Interrupted Cut on Hardened Steel
VCGT-AF
Inserts with a Very Positive Rake Angle and Sharp Cutting Edge for Semi-Finishing and Finishing Aluminum
CCGT-AF
80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
MM S-ER
Shanks that Mount MULTI-MASTER Solid Carbide Heads with an ER Collet Adaptation
ENHT
Toroidal Bull Nose Peripherally Ground Inserts with 4 Cutting Edges
VCET-WF
35° Rhombic Wiper Inserts for Finishing Operations at High Feeds
SNMG-VL
Double-Sided Square Inserts with a Chipformer for High Temperature Alloys and Stainless Steel Valves
DGN-W
Double-Sided Inserts with Central Ridged Chipformer for Parting and Grooving Hard Materials and Interrupted Cuts
HP ADCR 1906
Milling Inserts with .750" Cutting Edge for Machining Aluminum
HP ADKT/ADCT 1906
Milling Inserts with .750" Cutting Edge for General Use
DCGT-AF
Inserts with a Very Positive Rake Angle and Sharp Cutting Edge for Semi-Finishing and Finishing Aluminum
TAG N-C/W/M
Single-Ended Inserts for Parting, Grooving and Slitting Bars, Hard Materials and Tough Applications
TAG N-J/JS/JT
Single-Ended Inserts for Parting, Grooving and Slitting Soft Materials
PENTA 24N-RS/LS
Pentagonal Inserts for Parting and Precision Grooving Next to High Shoulder Applications
APKW 100304 PDR (PCD)
Single R.H. PCD Tipped Insert for Milling Aluminum
HTP LN.. 1606
Tangentially Clamped Inserts with 4 Cutting Edges for Plungers
TRI
Triple-Edged Groove Milling Inserts
HM90 APKT 1003PD-W
Wiper Insert
LNET 08
Tangentially Clamped Inserts for Slotting and Grooving Cutters
MTH-ISO (external)
Helical Thread Milling Inserts for ISO Metric External Threading
MTH-UN (external)
Helical Thread Milling Inserts for American Full Profile External Threading. Intended for General Applications
LNET 12-TN-MM
Tangentially Clamped Inserts with 4 Cutting Edges for Milling Deep and Long Slots on Steel
LNHT 1106 PN-N HT
Tangentially Clamped Inserts with Straight, Right- and Left-Hand Cutting Edges
SNMG-NF
Double-Sided Square Inserts for Super-Finishing; Controls Chip Flow at Very Low Feeds and Depths of Cut
GDMY-F
Utility Double-Ended Inserts for Grooving and Profiling Ductile Materials
T490 LNMT/LNHT/LNAR 1306
Tangentially Clamped Inserts with 4 Helical Cutting Edges
RCMT/RCCT-MO
Round Positive Rake Milling Inserts
GRIP (full radius)
Utility Double-Ended Full Radius Inserts for External, Internal and Face Machining
GIPA (round W=.118-.236)
Precision Double-Ended Inserts with Polished Top Rake for Machining Aluminum
MM S-B (85° conical shanks)
Shanks Interchangeable Milling Heads
GIF (long pocket)
Precision Double-Ended Inserts for Grooving
VCGT-MD/PF
35° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys
QDCT-PDN
Precision Ground Neutral insert for General Use
DCM-3.5D (.295-.823")
Drill Body with Exchangeable Heads, Internal Coolant, Flat Shank, No Flange, Drilling Depth 3.5xD, for Chamfering Holder
RCCW/RCMW-H-T
Round Milling Inserts with a Mounting Bottom Cylinder and 8 Indexing Cavities on the Insert Flank
CCMT-PF
80° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys
LNKX 1506PN-N PL
Tangentially Clamped Inserts with a Positive Land for Alloyed Steel, Stainless Steel and Cast Iron
LNKX/LNMT 1506PNTN/PN-N MM
Tangentially Clamped Inserts with a Reinforced Negative Land for Unfavorable Conditions
LNET 12..-30X1-N
Tangentially Clamped Inserts with 4 Cutting Edges for Parting and Slitting
PLHT
Tangentially Clamped Inserts with 4 Cutting Edges for Plungers
MM CAB
Adapters for Connecting FLEXFIT Shanks and MULTI-MASTER Milling Heads
FF WOCT/WOMT/WOMW
Arc Cutting Edge Inserts for Fast Feed Machining at Small Depths of Cut
TPGX (CBN)
Triangular Inserts with CBN Single Top Corner Brazed Tip, 11° Clearance for Machining Cast Iron and Hardened Steel
LNKX 1506 1.5X45 PN-N
Tangentially Clamped Chamfered Insert for 90° Cutters
GEAIR/L
Internal Grooving and Turning Adapters
MM S-A (stepped shanks)
Stepped Cylindrical Shanks Mount Interchangeable Milling Heads
HM90 APCR 1605..R-P
Super Positive Inserts with a Polished Rake for Machining Aluminum
PENTA 24N-J
Inserts with 5 Cutting Edges for Parting and Grooving Soft Materials, Tubes, Small and Thin-Walled Parts
3M AXKT 1304..R-PDRMM
High Durability Inserts with a Variety of Corner Radii for Heavy Milling
WCGT
Trigon Inserts with a 7° Positive Flank and Chipformer for Finish Turning
CCMT-WG
80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
DCMT/DCGT-PF
55° Rhombic Inserts with a Positive Flank for Semi-Finish and Finishing on Soft Materials and Exotic Alloys
LNET 12-TN
Tangentially Clamped Inserts with 4 Cutting Edges for Slotting Cutters
DGN-P
Double-Sided Inserts for Parting and Grooving Soft Materials, Thin and Miniature Parts
DGN/DGNM-J/JS/JT
Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
DGN-UT/UA
Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds
HGN-UT
Double-Sided Inserts for Parting and Grooving Low Feeds on Cr-Ni Alloys and Low Carbon Steel
E-SHANK
Solid Carbide Shanks for Economical Boring with Different Interchangeable Heads
SNMM-RP
Single-Sided Square Inserts for Roughing of Soft and Ductile Materials
OFMW-AETN
Octagonal Milling Inserts for Heavy Duty Applications
MM FF
Interchangeable 2 Flute FEEDMILL Solid Carbide Heads for Milling at Very Fast Feeds and Small D.O.C.
HM90 ADKT 1505
Inserts with 2 Helical Cutting Edges for General Use
HP ADKT/ADCT 2207
Inserts with Two 22 mm Long Cutting Edges for General High Shoulder Milling
HM90 AXCR 1505
Super Positive Inserts with a Polished Rake for Machining Aluminum
LNHW 1506 PNTN (CER)
Tangentially Clamped Ceramic Insert for High Speed Machining of Gray and Nodular Cast Iron
LNAR 1506
Tangentially Clamped Insert with a Positive Polished Land and Sharp Cutting Edge
GDMA
Utility Double-Ended Insert for Machining Aluminum
HP ADCR 2207
Milling Inserts with a Very Positive and Polished Rake for Machining Aluminum
HM90 ADCR 1505PDFR-P
Peripherally Ground Insert with a Super Positive Polished Rake for Machining Aluminum and High Temperature Alloys
CNHT/MT 07
Toroidal Bull Nose Peripherally Ground Inserts with 4 Cutting Edges
LNAT 1506..PN-N MM
Tangentially Clamped Precision Ground Inserts with Various Corner Radii for Corner Rounding
HM90 APCR 100304PDFR-P/DP
Inserts with Positive Helical Cutting Edges and Polished Rake for Machining Aluminum and High Temperature Alloys
LNMW 1506 PNTN
Tangentially Clamped Insert for Machining Gray and Nodular Cast Iron
ST-MB-E
MB Modular Connection System with Cylindrical Carbide Shanks
GDMN
Utility Double-Ended Inserts for Grooving and Turning Ductile Materials
DGN-Z
Double-Sided Inserts for Parting Tubes, Thin-Walled and Small Parts
HM90 APCR 2206..R-P
Super Positive Inserts with a Polished Rake for Machining Aluminum
RCMT/RCMW/RCCW-FW
Fully Effective Serrated Inserts with Four Options for Indexing Orientation
GIMY-F
Utility Single-Ended Inserts for Grooving and Profiling Ductile Materials
RCMW/RCCW-MO
Round Flat Rake Milling Inserts
BCR
Ball Nose Inserts with a Straight Cutting Edge Tangent to a Round Corner
SNMA (CBN)
Square CBN Tipped Inserts with a Single Flat Rake for Machining Cast Iron and Hardened Steel
TPGX
Triangular Inserts with an 11° Positive Flank and Ground Chipformer for Finish Turning
HM90 APKT 1003
Inserts for General Use with 2 Helical Cutting Edges for High 90° Shoulder Accuracy
GIA-K (W=.118-.236)
Flat Top Precision Double Ended Inserts with T-Land for Machining Cast Iron
RFMT 1905-76
Round Milling Inserts
3M AXKT 1304
High Durability Inserts for Heavy Milling
HM90 ADCT 1505
General Use Inserts with 2 Helical Cutting Edges for High 90° Shoulder Accuracy
HGPL
Utility Double-Ended Inserts for Face Machining
HM90 APCT 1003
Inserts with a Sharp Cutting Edge for Semi-Finish and Finishing
GDMM-CC
Single-Ended Utility Insert for External Rough Grooving and Side Turning with a Front Chip Splitter
SNMM-NR
Single-Sided Square Inserts with a Special Chipformer for Heavy Machining
VCMT (CBN)
35° Rhombic Single Brazed Tip Corner Inserts for Finishing Cast Iron
CCGW/CCMT (CBN)
80° Rhombic Inserts with a Single CBN Top Corner Tip and 7° Clearance for Machining Hardened Steel
DCMT (CBN)
55° Rhombic Inserts with a Single CBN Top Corner Tip and 7° Clearance for Machining Hardened Steel
RXCW
Precision Ground Flat Rake Round Milling Inserts
RXCR
Precision Ground Positive Rake Round Milling Inserts
QOMT-HQ
Insert with 4 Right- or Left-Hand Cutting Edges for General Use
MM GRT (shanks)
Mount Slitting and Grooving Interchangeable Milling Heads
APKT 1003PDTR/L-RM
Inserts with Reinforced Helical Cutting Edge for Interrupted Cut and Heavy Machining
ADKT 1505PDTR/L-RM
Inserts with Reinforced Helical Cutting Edge for Interrupted Cut and Heavy Machining
QDMT 1205..PDTN-M
Neutral Inserts for Slotting
QPMT 100408PDTN
Neutral Insert with Reinforced Land for Slotting
R90CW
Round Flat Rake Inserts for Profile Milling
APCR 1003PDFR-P
Super Positive Insert with a Polished Rake for Machining Aluminum
SIR/L
Internal Threading Bars
RXMT 10
Positive Rake Round Milling Inserts for Rough Operations
SNMG-PP
Double-Sided Square Inserts for Machining Very Ductile Materials at Medium Cutting Conditions
CCMT/CCGT
80° Rhombic Inserts with a 7° Positive Flank for Semi-Finish and Finish Turning
DCMT/DCGT
55° Rhombic Inserts with a 7° Positive Clearance for Finishing Applications
RNG (CER)
Negative Round Double-Sided Ceramic Inserts for Machining Cast Iron, Hardened Steel, and Heat-Resistant Alloys
VCGT-AS
35° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
IR/L-UNJ
Internal UNJ Profile Laydown Threading Inserts for the Aviation and Aerospace Industries
IR/L-PG
Internal Thread Profile Inserts for the Electric Industry
R90MT
Round Profile Milling Inserts
O45MT
45° Octagonal Milling Insert
GIPM-A46 / GIP-1250
Precision Ground Back Turning Inserts for External Machining on Swiss-Type and Automatic Machines
CCMT/CCGT-SM
Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys
DCMT/DCGT-SM
55° Rhombic Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
VCMT-SM
35° Rhombic Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
OFMT 07
Octagonal Milling Inserts for General Use
GIF-E (W=.315,.394)
Precision Double-Ended Inserts for Grooving and Turning
GIPY
Single-Ended Full Radius Sharp Edged Precision Inserts for Profiling High Temperature Alloys
GDMF
Utility Double-Ended Inserts for Grooving and Turning
CCGT-AS
80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
DCGT-AS
55° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
HGN-C
Parting and Grooving Inserts for Parting Bars, Hard Materials and Tough Applications
HGN-J
Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
SNMG-NR
Double-Sided Square Inserts with a Special Chipformer for Heavy Machining
RFMW 1905
Round Insert with a Reinforced Flat Rake for Profile Milling
OFCR/OFCT-AEN/AETN
Octagonal Milling Inserts with Positive Rake and Sharp Cutting Edges
GHVR/L
Internal and External Profiling Holders for Machining Aluminum Wheels
GHDKR/L
External and Internal Profiling Holders for Machining Aluminum Wheels
MCKNR
Comlock 75° Lead Angle Facing Holders for Negative 100° Rhombic Inserts
XOMT-HQ
Square Inserts for Milling, Drilling and Boring with 2 Right- and 2 Left-Hand Cutting Edges for General Use
XPMT-HQ
Insert with 2 Right- or Left-Hand Cutting Edges with Positive Land
TCMT-19
Triangular Inserts with a 7° Positive Flat Rake for Semi-Roughing Applications at Medium to High Feeds
TNG (CER)
Negative 60° Triangular Double-Sided Ceramic Inserts for Machining Hardened Steel, Cast Iron and Heat Resistant Alloys
SNG (CER)
Negative Square Double-Sided Ceramic Inserts for Machining Cast Iron, Hardened Steel and Heat-Resistant Alloys
SNGA (CER)
Negative Square Double-Sided Ceramic Inserts for Machining Cast Iron and Hardened Steel
SNMA
Double-Sided Square Inserts Without a Chipformer for Short Chipping Materials
SNMG-GN
Double-Sided Square Inserts for General Applications
SNMG-TF
Double-Sided Square Inserts for Machining a Wide Range of Materials under Medium Cutting Conditions
SNMM-NM
Single-Sided Square Inserts for Roughing Applications
SOMT-HQ
Square Milling Inserts for General Use
ADKT 1505PDR/L-HM
Inserts with 2 Helical Cutting Edges for General Use
ADKT 1505PDTR-76
Inserts with 2 Helical Cutting Edges with Ribs Along the Edge for Interrupted Cuts
ADMT 1505PDR-HS
Inserts with a Chip Splitting Serrated Cutting Edge for Roughing
APCR 2206..-HM
Super Positive Inserts with a Polished Rake, for Machining Aluminum
ADCR 1505PDFR
Super Positive Precision Inserts for Aluminum, Stainless Steel and High Temperature Alloys
ADCT 1505PDFR-HM
Peripherally Ground Inserts for Finishing and General Use
ADKR 1505PDR/L
High Positive Inserts for Machining Steel, Stainless Steel and High Temperature Alloys
ADKT 1505..R/L-HM
Inserts with 2 Helical Cutting Edges and Various Corner Radii for General Use
CCMT-14
80° Rhombic Inserts with a 7° Positive Flank for Semi-Finish and Finish Turning
DCMT-14
55° Rhombic Inserts with a Positive Flank for Semi-Finish and Finish Turning on Soft Materials and Exotic Alloys
DCMW
55° Rhombic, 7° Positive Flank Inserts, for Short Chipping Materials
DGN/DGNC/DGNM-C
Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications
ER/L-ACME
External ACME Profile Laydown Threading Inserts for Feed Screws
ER/L-55°
External Laydown Threading Inserts with a 55° Partial Profile for General Applications
ER/L-60°
External Laydown Threading Inserts with a 60° Partial Profile for General Applications
ER/L-ISO
External ISO Metric (DIN13 12-1986 class: 6g) Laydown Threading Inserts for General Applications
ER/L-UN
External American UN Full Profile (UN, UNC, UNF, UNEF) Laydown Threading Inserts for General Applications
ER/L-UNJ
External UNJ Profile Laydown Threading Inserts for the Aviation and Aerospace Industries
ER/L-W
External Whitworth (BSW, BSF, BSP) B.S.84-1956 DIN 259 Medium Class Full Profile Laydown Threading Inserts
GDMU
Utility Inserts for Heavy Grooving on Ductile Materials
GDMY
Utility Double-Ended Inserts for Grooving and Turning
GFF-R/L
Face Grooving Inserts
GIFG-E (W=.315)
Inserts for Deep Face Grooving and Turning
GIFI
Precision Double-Ended Inserts for Internal Grooving and Recessing
GIFI-E
Precision Double-Ended Inserts for Internal Grooving and Turning
GIG
Precision Double-Ended Inserts for Grooving
GIM-W
Single-Sided Inserts with Center Ridged Chipformer and Reinforced Edge for Parting and Grooving Alloy Steel
GIM-C
Parting and Grooving Single-Sided Inserts for Parting Bars, Hard Materials and Tough Applications
GIM-J
Utility Single-Sided Inserts for Parting and Grooving Soft Materials, Tubes and Small Diameters
GIM-UT
Single-Ended Screw-Clamped Inserts for Parting and Grooving at Low Feeds on CrNi Alloys and Low Carbon Steel
GIMF
Utility Single-Ended Inserts for Grooving and Turning
GIMY
Utility Single-Ended Inserts for Grooving and Turning
GHGR/L
External Holders for Deep Grooving and Parting
GHSR/L
External Grooving and Turning Holders for Swiss-Type and Automatic Machines
GIPA/GIDA 8 (full radius)
Precision Double-Ended Inserts with Polished Top Rake for Machining Aluminum
GIP
Precision Double-Ended Inserts for Grooving
GIP-E
Precision Double-Ended Inserts for Grooving and Turning
GIPA (W=.118-.236)
Double-Ended Precision Ground Inserts with a Polished Top Rake for Machining Aluminum
GIPI
Precision Double-Ended Inserts for Internal Grooving and Recessing
GIPI-E
Precision Double-Ended Inserts for Internal Grooving and Turning
GRIP
Utility Double-Ended Inserts for External, Internal and Face Machining
HFPR/L
Utility Double-Ended Face Machining Inserts
IR/L-55°
Internal Laydown Threading Inserts with a 55° Partial Profile for General Applications
IR/L-60°
Internal Laydown Threading Inserts with a 60° Partial Profile for General Applications
IR/L-BSPT
Internal BSPT (British Standard Pipe) B.S.21-1957 Full Profile Laydown Threading Inserts
IR/L-ISO
Internal ISO Metric (DIN13 12-1986 class 6H) Laydown Threading Inserts for General Applications
IR/L-NPT
Internal NPT (National Pipe Threads) Full Profile Laydown Threading Inserts for Steam, Gas and Water Pipes
IR/L-TR
Internal Trapezoid Shaped DIN 103 Laydown Threading Inserts for Feed Screws
IR/L-UN
Internal American UN Full Profile (UN, UNC, UNF, UNEF) Laydown Threading Inserts for General Applications
IR/L-W
Internal Whitworth (BSW, BSF, BSP) B.S.84-1956 DIN 259 Medium Class Full Profile Laydown Threading Inserts
SEKT-AF-R
Super Positive Square Milling Inserts for 45° Finishing and Medium Machining Soft Materials
GHDR/L (short pocket)
External Tools for Turning, Grooving and Parting
GHDR/L (long pocket)
External Tools for Grooving, Turning and Parting
GHDR/L/N-12/14
External Tools for Wide Grooving Inserts
PICCO R/L 050, 053, 055
Inserts for Internal Turning and Chamfering
E30
30° Chamfering Endmills
PICCO-010/610 (Face Grooving)
Inserts for Face Grooving
C#-GHDR/L
External Grooving, Turning and Parting Toolholders with CAMFIX Exchangeable Tapered Shanks
GIQR/L 8
Precision Ground Single-Ended Inserts for Internal Grooving and Turning
GIQR/L 8-R
Precision Ground Single-Ended Full Radius Inserts for Internal Grooving and Profiling
CC95MT-SM
Single-Sided 80° Rhombic Inserts for Finishing (CHAMELEON Multifunction Pocket System)
SUXCR-CM
Screw Lock Toolholders for Four Different 7° Clearance Geometric Shapes
PQFNR/L
Lever Lock Face Turning Tools Carrying Negative Inserts with Four 80° Corners
PQLNR/L
Lever Lock Tools Carrying Negative Inserts with Four 80° Corners
SDACR/L-S
Screw Lock Tools Carrying 55° Diamond Inserts with 7° Clearance Angle
SVACR/L-S
91° Lead Angle Screw Lock Tools Carrying 35° Diamond Inserts with 7° Clearance Angle
HM90 E90A-10
Endmills Carrying HM90 AP.. 1003... Inserts
SCACR/L-S
Screw Lock Tools Carrying 80° Diamond Inserts with 7° Clearance Angle for Swiss-Type Machines
XNUW
Blank Inserts for Wide Profile Grooving
LNMT/LNHT 1506PN-R HT
Tangentially Clamped Inserts with 4 Straight Right-Hand Cutting Edges
S-SLANR/L-TANG
Boring Bars Carrying LNMX Tangentially Screw Clamped Inserts with 4 Cutting Edges for High Metal Removal Rates
S/A-MULNR/L-MW
MULTI-WEDGE Lock, Boring Bars for Negative 80° Rhombic, Trigon and Square Inserts
MULNR/L-MW
MULTI-WEDGE Lock, External Toolholders for Negative 80° Rhombic, Trigon and Square Inserts
MM HR
Interchangeable 2 Flute Solid Carbide Corner Round Milling Heads
E-STLPL-HEAD
Interchangeable Screw Clamped Boring Heads for Positive 11° Clearance Triangular Inserts, Mounted on Carbide Bars
E-STFCR-HEAD
Interchangeable Screw Clamped Boring Heads Carrying Positive 7° Clearance Triangular Inserts Mounted on Carbide Bars
PICCO R/L 090
Inserts for Internal Turning and Profiling
SLANR/L-TANG
Screw-Lock Tools Carrying the LNMX.. Tangentially Clamped Inserts
SLLNR/L-HF
Screw Clamped Toolholders for Fast Metal Removal in Longitudinal Turning
UMGR
Miniature Indexable Inserts for Internal Turning
SVJNR/L-F
Screw Lock Tools with a Wedge for High Rigidity Carrying 35° Negative Inserts for Profiling Applications
SVVNN-F
Screw Lock Tools with a Wedge for High Rigidity in Profiling Applications Carrying 35° Negative Inserts
GEPI-UN/UR/UL
Precision Double-Ended Inserts for Internal Undercutting
PICCO-015 (Face Grooving)
Inserts for Deep Face Grooving
PLANR/L-TANG
Lever Lock Tools Carrying LNMX.. Tangentially Clamped Inserts
A-SVLFCR
Screw Lock Boring Bars for 35° Rhombic Inserts with 7° Clearance
GIQR/L 11
Precision Ground Single-Ended Inserts for Internal Grooving and Turning, DMIN .433"
PICCO-010 (Round Face Groove)
Inserts for Round Profile Face Grooving
MTEC E-ISO
Solid Carbide External Threading Endmills for an ISO Thread Profile
SET 16ERM-ISO
Kit Containing 10 Full Profile, External ISO Metric Threading Inserts with Molded Chipformers, 5 Pitch Sizes
DCBNR/L
R-Clamp Tools with 75° Lead Angle Using the 100° Corner of CNMG Inserts
KITI BHFI MB-BL
Contains a Balanceable Fine Boring Head and Various Boring Bars and Inserts
DDJNR/L
R-Clamp Tools with 93° Lead Angle Carrying 55° Negative Rhombic Inserts
LNMT/LNHT 1506...-N HT
Tangentially Clamped Inserts with 4 Straight Cutting Edges: 2 L.H. and 2 R.H.
PRDCN
Lever Lock Tools Carrying RCMX Round Inserts
SWAPR-PAD
90° Lead Angle Screw Lock Adapters Carrying Trigon Inserts for Swiss Automatic Machines
ICP
Exchangeable SUMOCHAM Drilling Heads for Machining ISO P Materials
SUXCR-CM-PAD
Screw Lock Adapter for Four Different 7° Clearance Geometries
ICP-2M
Exchangeable Double Margin SUMOCHAM Drilling Heads, for Machining ISO P Materials with High Surface Finish Results
PICCO R 050 (CBN)
CBN Tipped Inserts for Internal Turning, Profiling and Chamfering Hard Steel
PICCO R/L 047
Inserts for Internal Deep Profiling
PICCO R/L 050-C
Inserts with Chipformers for Internal Boring and Profiling
GIQR/L 11-15
Precision Ground Single-Ended Inserts for Internal Deep Grooving and Turning
GIQR/L 11-15-R
Precision Ground Single-Ended Full Radius Inserts for Deep Internal Grooving and Profiling
PICCO-016/020 (Face Grooving)
Inserts with Coolant Channel for Deep Face Grooving
GIPI (full radius W<M)
Precision Double-Ended Full Radius Inserts for Internal Grooving and Recessing
GIPI (W<M)
Precision Double-Ended Inserts for Internal Grooving and Recessing
GEPI (W<M)
Precision Ground Double-Ended Inserts for Internal Grooving
ICK
Exchangeable SUMOCHAM Drilling Heads for Machining ISO K Materials
PICCO R 050.20
Inserts for Internal Turning and Chamfering Next to the Bottom of Blind Holes
ICK-2M
Exchangeable Double Margin SUMOCHAM Drilling Heads, for Machining ISO K Materials with High Surface Finish Results
GIQR/L 11-R
Precision Ground Single-Ended Full Radius Inserts for Internal Grooving and Profiling
SD-SP
Interchangeable Solid Carbide T-Slot Milling Heads
PWLOR/L-IQ
Lever Lock and Dovetail Pocket Rigid Clamping Tools Carrying Unique Double-Sided Trigon Inserts
PCLOR/L-IQ
Lever Lock and Dovetail Pocket Rigid Clamping Toolholders for Unique Double-Sided 80° Rhombic Inserts
PWXOR/L-TF-IQ
Lever Lock Tools for Fast Feed Longitudinal Turning
SLANR/L-15-TANG-JHP
Screw-Lock Tools with Channels for High-Pressure Coolant Carrying LNMX Tangentially Clamped Inserts
HM390 ETC-07
90° Endmills Carrying HM390 TCKT 0703 Triangular Inserts with 3 Helical Cutting Edges
PLBOR/L
Lever Lock Tools Carrying LOMX Tangentially Clamped Super Heavy Turning Inserts
HCP-IQ
Exchangeable Self-Centering SUMOCHAM Drilling Heads, for Machining ISO P and ISO K Materials
SER/L-JHP
External Threading Tools with Coolant Channels
QCP-2M
Exchangeable Double Margin, Self-Centering SUMOCHAM Drilling Heads, for ISO P Materials with High Surface Finish Results
BGM N-J
Narrow Material Cost Saving Inserts for Grooving and Parting up to .787" Bar Diameters
MM GRIT 28P-DR
Interchangeable 6 Flute Solid Carbide Double-Sided Corner Round Milling Heads
60° PARTIAL PROFILE THREADING FLT
Double-Ended Precision Flat Top Threading Inserts
ICG
Exchangeable Chip Splitting SUMOCHAM Drilling Heads, for Machining ISO M and ISO P Materials
MM ER
Interchangeable 4 Flute Solid Carbide Corner Round Milling Heads
TOGT-DT
Deep Drilling Inserts with 3 Chip Splitting Cutting Edges, a Positive Rake Chipbreaker and a Wiper
PICCO R/LHD 050
Inserts for Internal Turning and Chamfering Hard Steel - Up to 65 HRC
PICCO R/LM
Profiling Inserts with Coolant Channel Optimized for Machining Medical Parts
C#-SRKIN-CX
Thermal Shrink Chucks with CAMFIX (ISO 26623-1) Tapered Shank and Jet Coolant Grooves along the Shank Bore
CAT-SRKIN-CX
Thermal Shrink Chucks with Caterpillar Form AD Tapered Shank and Jet Coolant Grooves along the Shank Bore
LOGT
Deep Drilling Inserts with 2 Chip Splitting Cutting Edges, Positive Rake Chipbreaker and a Wiper
PICCO R/L 050-NC (Turning, with Chipbreaker)
Inserts with Chipformers and Inner Coolant Channel for Internal Boring and Profiling
PICCO R/L 050, 053, 055-N (Turning)
Inserts with Inner Coolant Channel for Internal Turning and Chamfering
PICCO-015-N (Face Grooving)
Inserts with Internal Coolant Channel for Deep Face Grooving
TOGT-GF
Deep Drilling Inserts with 3 Chip Splitting Cutting Edges, a Positive Rake Chipbreaker and a Wiper
TGAQ-JHP
Parting and Grooving Square Adapters with Internal Coolant Holes Carrying TANG-GRIP Tangentially Clamped Inserts
TGAQ
Parting and Grooving Square Adapters Carrying TANG-GRIP Tangentially Clamped Inserts
PICCO-016/020-N (Face Grooving)
Inserts with Internal Coolant Channel for Deep Face Grooving
PICCO R/L 090-N (Turning 90°)
Inserts with Inner Coolant Channel for Internal Turning and Profiling
PICCO-010/610-N (Face Grooving)
Inserts with Internal Coolant Channel for Face Grooving
PICCO-010-N (Full Radius for Face Grooving)
Inserts with Internal Coolant Channel for Round Profile Face Grooving
PICCO R 050-N (Turning with CBN)
CBN Tipped Inserts with Inner Coolant Channel for Internal Turning, Profiling and Chamfering of Hard Steel
PICCO R/LHD 050-N (Turning for Hard Steel)
Inserts with Inner Coolant Channel for Internal Turning and Chamfering of Hard Steel - Up to 65 HRC
ETB
Solid Carbide Taper-Shaped (Barrel) Endmills for 3D Profiling
TGAQ-ECD (JET-CROWN)
Parting and Grooving Square Adapters Compatible with TANG-GRIP Inserts (Single-Ended)
NQCH-SCACR/L-S-JHP
Screw Lock JETCUT Modular Heads Carrying 7° Clearance 80° Rhombic Inserts for Swiss-Type Machines
IHP
Exchangeable Drilling Heads for DCN Drills, for Machining ISO P Materials (Non-alloy and Carbon Steel)
NQCH-SVACR/L-S-JHP
Screw Lock JETCUT Modular Heads Carrying 35° Rhombic Inserts with 7° Clearance Angle for Swiss-Type Machines
ZSGT
Deep Drilling Inserts with Single Chip Splitting Cutting Edge and a Wiper
ERI-S4 R
4 Flute Corner Rounding Solid Carbide Endmills
KIT BALANCE SCREWS
ETS-XN06
T-SLOT Endmills Carrying XNMU 0603 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
AVC-D-SIR/L
Interchangeable Boring Heads for Threading Inserts
FFQ8-12
Fast Feed Face Mills Carrying Double-Sided Inserts with 8 Cutting Edges
H690 EWN-MM-04
90° Endmills with a MULTI-MASTER Threaded Connection Carrying H690 WNMU 0403 Double-Sided Trigonal Inserts
DGAQ
Parting and Grooving Square Adapters Carrying DO-GRIP Inserts
DGAQ-JHP
Parting and Grooving Square Adapters with Internal Coolant Holes Carrying DO-GRIP Inserts
HM390 ETC-MM
90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying HM390 TCKT 0703 Triangular Inserts
60° PARTIAL PROFILE THREADING FLT-CB
Double-Ended Precision Threading Inserts with Chipbreakers
SD TRD-W-SP
Interchangeable Solid Carbide Heads for 55° Partial Profile Thread Milling
BGM R/L-J
Narrow Material Cost Saving Inserts for Parting up to .787" Bar Diameters
ETS-XN13
T-Slot Endmills Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
HTP-LN10
Side Plungers Carrying Tangentially Clamped Inserts with 4 Cutting Edges
Drilling Eccenter Sleeves
Bushings for Enlarging or Reducing DR Nominal Drilling Diameters by Shifting the Drill Off-Center
MGCH-C (face)
Face Machining Tools Carrying GFQR Inserts for Dmin .472 - Dmax .748" Penetration Range
GIQR/L-A18
Internal Boring and Profiling Inserts
E45
45° Chamfering Endmills
E45X
45° Chamfering Endmills Carrying X/Q/SOMT 06 Inserts
MVJNR/L
Comlock Tools Carrying 35° Negative Rhombic Inserts
MVVNN
Pin and Clamp Tools Carrying 35° Negative Rhombic Inserts
MG
Internal Grooving, Turning and Threading Bars
PQLCR/L
Lever Lock Tools Carrying 80° Positive 4-Cornered Inserts
MGCH
Solid Carbide Bars for Internal Grooving, Turning and Threading, DMIN .315"
MGSIR/L
Solid Carbide Bars for Internal Turning and Threading
WPEX
80° and 84° Precision Trigon Inserts with Positive 8° and 12° Clearance for Finishing Applications
E-STLPR
Screw Lock Boring Bars for 11° Clearance Triangular Inserts, Carbide Shank with Coolant Holes
HM90 E90A-MM-10
90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying HM90 AP.. 1003... Inserts
RM-BN-H7LB
Quick Change Left-Hand Flute Interchangeable Solid Carbide Reaming Heads for High Speed Reaming Through Holes
HTP-M-LN10
Side Plungers with FLEXFIT Threaded Connection Carrying Tangentially Clamped Inserts with 4 Cutting Edges
FDN-XN13
Full Slot Flange Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
SDN-XN13
Full Slot Disk Type Slotting Cutters Carrying XNMU 1306 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
SD TRD-M-SP
Interchangeable Solid Carbide Heads for 60° Partial Profile Thread Milling
60° PARTIAL PROFILE THREADING FLTF
Double-Ended Precision Flat Top Threading Inserts
FLASR/L
External Tools for Grooving and Threading intended for Swiss-Type Machines
HM390 SM-10
Extended Flute Shell Mills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges
TGTBY-JHP
Y-Axis Intermediate Prismatic Holders for Square JHP Adapters on Multi-Task Machines for Parting and Grooving
MFQ8-12
Moderate Feed Face Mills Carrying Double-Sided Inserts with 8 Cutting Edges
HM90 E90A-MM-10-JHP
90° JHP Endmills with a MULTI-MASTER Threaded Adaptation Carrying HELI2000 and HELIMILL Inserts
TGTBQ-JHP-MC
Tool Blocks which Mount Square Adapters with Three High-Pressure Coolant Inlets for Parting and Grooving
FDN-XN09
Full Slot Flange Type Slotting Cutters Carrying XNMU 0904 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
SDN-XN09
Full Slot Disk Type Slotting Cutters Carrying XNMU 0904 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
EOB
Solid Carbide Oval-Shaped (Barrel) Endmills for 3D Profiling
CH45-MM-PN06
Upper and Bottom Chamfering Endmills with a MULTI-MASTER Threaded Adaptation
SVHNR/L-AL-JHP
Screw Lock Tools with Channels for High-Pressure Coolant Carrying 35° Rhombic Inserts
SDN-XN06
Full Slot Disk Type Slotting Cutters Carrying XNMU 0603 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
FDN-XN06
Full Slot Flange Type Slotting Cutters Carrying XNMU 0603 Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges
HM90 E90AD-MM-15-JHP
90° JHP Endmills with a MULTI-MASTER Threaded Adaptation Carrying HELI2000 and HELIMILL Inserts
TGTBQ-ECD-JHP (JET-CROWN)
Tool Blocks for Square TANG-F-GRIP (TGAQ-ECD) Parting and Grooving Adapters for High-Pressure Coolant
TGTBQ-RIB-ECD-JHP (JET-CROWN w/RIB)
Tool Blocks for Square (TGAQ-ECD) Parting and Grooving Adapters with High-Pressure Coolant for Machining next to Spindle
FFT3 EFM-03
Endmills Carrying Single-Sided Small Trigon Inserts for Fast Feed Milling
FFX4 ED
Endmills Carrying Small Double-Sided "Bone Shaped" Inserts with 4 Cutting Edges for Fast Feed Milling
FFT3 EFM-02
Small Diameter Endmills Carrying Single-Sided Triangular Inserts for Fast Feed Milling
HM390 ETP-05
90° Endmills Carrying HM390 TPKT 0502 Triangular Inserts with 3 Helical Cutting Edges
HM390 ETP-04
90° Small Diameter Endmills Carrying HM390 TPKR 0401 Triangular Inserts with 3 Helical Cutting Edges
CH45-PN06
Upper and Bottom Chamfering Endmills Carrying Pentagonal Inserts
TGTBQ-JHP
Tool Blocks for Square TANG-F-GRIP and DO-F-GRIP Parting and Grooving Adapters for High-Pressure Coolant
60° PARTIAL PROFILE THREADING FLTK
Double-Ended Precision Positive Rake Threading Inserts
H1200 HXCU 0606
Double-Sided Hexagonal Inserts with 12 Cutting Edges
HM390 ETP-10
90° Endmills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges
MF EWX
Moderate Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges
MM TS-DG
Double Groove Internal Grooving Heads with a Threaded Connection for Heat Exchanger Tube Sheets
DCN A-1.5D
Drill Body with Exchangeable Heads, Internal Coolant Holes and One Flat Shank, Drilling Depth 1.5xD
HTP-R-LN10
Shell Mill Plungers Carrying Tangentially Clamped Inserts with 4 Cutting Edges
MIFHR
Bars for Face and Internal Grooving, Undercutting and Threading Inserts
FF EWX
Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges
SDN-LN08
Disk Type Grooving and Slitting Cutters
DCN R-1.5D
Drill Body with Exchangeable Heads, Internal Coolant Holes and a Cylindrical Shank, Drilling Depth 1.5xD
OFMW-FF
Inserts with 8 FEEDMILL Large Radii Segmented Cutting Edges for Fast Feed on HELIOCTO Cutters
MM HT
Torodial 2 Flute Interchangeable Solid Carbide Milling Heads
HM90 E90A-M-10
90° Endmills with a FLEXFIT Threaded Adaptation Carrying HM90 AP.. 1003... Inserts
SER/L
External Threading Toolholders
SRNCN
Screw Lock Neutral Holders for 7° Clearance Angle Round Inserts
SRGCR/L
Screw Lock Tools Carrying Round Inserts with 7° Clearance Angle
SVJCR/L
93° Lead Angle Screw Lock Tools Carrying 35° Diamond Inserts with 7° Clearance Angle
SVVCN
72.5° Lead Angle Screw Lock Tools Carrying 35° Diamond Inserts with 7° Clearance Angle
WPEB
Precision Positive 8° and 12° Clearance, 80° and 84° Trigon Inserts with a Flat Rake for Finishing Applications
HSK A-ER
DIN6499 ER Collet Chucks with HSK DIN69893 Form A Tapered Shanks
IHPR
75° Rough Boring Toolholders
IHBR
Rough Boring Toolholders
IHRF
80° Rhombic Insert Holders for Mounting on MB Fine Boring Heads
HM90 E90AD-15
90° Endmills Carrying HM90 ADKT-1505... Inserts
GSFN
SELF-GRIP Slitting Inserts
APCT 1003PDR-HM
Inserts with 2 Helical Precision Ground Cutting Edges for High Accuracy Finishing
E60
60° Chamfering Endmills
PICCO R/L 060
Inserts for Internal Turning and 45° Chamfering
GEPI-MT
Precision Ground Internal Double-Ended Threading Inserts with a 60° Partial Profile for General Applications
GEPI-WT
Precision Ground Double-Ended Threading Inserts with a 55° Partial Profile and a Chipformer for .453" Bore Diameter
PICCO-MF
Multifunction Solid Carbide Tools for Drilling, Facing, Internal and External Turning on Swiss and Small CNC Machines
GHIUR/L-UC
45° Undercutting Bars for Internal Turning Aluminum Wheels
PICCO-MFT
Solid Carbide Tools for Drilling, Facing, Internal / External Turning and Threading on Swiss and Small CNC Machines
PDACR/L-S
Side Lever Lock Tools Carrying 55° Positive Rhombic Inserts for Swiss Automatic Machines
IHSR-BW
Back Face Turning Tools for BHR Rough Boring Heads
IHRF-CH
Chamfering Tools for BHF Boring Heads
PCHBR/L
Double-Ended Parting and Grooving Blades for PENTACUT Inserts
KITI BHFI-MB
Contains a Fine Boring Head, Adapters, Extensions and Various Boring Bars and Inserts
HBR-QF
220° Spherical Profile Inserts for Roughing and Semi-Finishing, Up and Down Ramping and Undercutting
HSK A63WH-SLSNR-TANG
Tools for 45° Mounting, with HSK Taper Shanks for LNMX-HT - High Production Cutting, Tangentially Clamped Inserts
TPH M-W (HSS)
DIN 13 HSS Hand Tap Set for ISO Metric Coarse Threads
DWLNR/L
External 95° Lead Tools Carrying the Negative WNMG Trigon Inserts
DCLNR/L
R-Clamp Tools with 95° Lead Angle Carrying the 80° Negative Rhombic Inserts
HM90 APKW 1003PDR
Inserts with a Reinforced Edge and Flat Rake for Hardened Steel and Milling Heavy Interrupted Cut
PVACR-S
Side Lever Lock Tools for 35° Positive Rhombic Inserts intended for Swiss Automatic Machines
SET 16IRM-ISO
Kit Containing 10 Full Profile, Internal ISO Metric Threading Inserts with Molded Chipformers, 5 Pitch Sizes
ADJ CAT
FINEFIT Center Alignment Shank and Base with a Caterpillar AD/B Tapered Shank, for Specially Tailored Toolholders
R (drive flange set)
Drive Flange Set for Slitting Cutters
TRIB
Slitting Shanks Carrying Triple-Edged Precision Ground Inserts
HTP-R-LN16
Shell Mill Plungers Carrying Tangentially Clamped Inserts with 4 Cutting Edges
MTEC E-UN
Solid Carbide Threading Endmills with UN Form for External Threading
PICCO-620 (Groove Along Shaft)
Inserts for Grooving Along a Shaft Dmin .236"
ADJ CAT-ER
Center Alignment DIN 6499 ER Collet Chucks with Caterpillar Form AD/B Tapered Shanks
GIQR/L-B18
Internal Back Boring and Profiling Inserts
MF FWX
Moderate Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges
C#-SEM-C
ISO 3937 Shell Mill Holders with CAMFIX (ISO 26623-1 standard) Exchangeable Tapered Shanks
PCHPR/L
Perpendicular Holders Carrying Inserts with 5 Cutting Edges for Facing, Grooving, Parting and Recessing
HTP-LN06
Side Plungers Carrying Tangentially Clamped Inserts with 4 Cutting Edges
MIGR 8
Internal Shallow Grooving Inserts
PCHR/L-34
Grooving, Parting and Recessing Holders Carrying Inserts with 5 Cutting Edges
T290 LNMT/LNHT 1004
Tangential Insert with 2 Cutting Edges
TRIB-SM
Grooving Shell Mills with Triple-Edged Precision Ground Inserts
ADJ C#-ER
FINEFIT Center Alignment Shank and Base with CAMFIX Adaptations for Specially Tailored Toolholders
ADJ C#
FINEFIT Center Alignment Shank and Base with a CAMFIX (ISO 26623-1) Shank
PENTA 34F-R/L
Pentagonal Inserts for Face Grooving and Recessing
SVJCR-PAD
93° Lead Angle Screw Lock Adapters Carrying 35° Diamond Inserts with 7° Clearance Angle
FF FWX
Fast Feed Face Mills Carrying Double-Sided Inserts with 6 Cutting Edges
MTECZ-BSF/BSP
Solid Carbide Threading Endmills with Coolant Holes for Internal or External BSF/BSP Thread
PDACR/L-JHP
Tools with Channels for High-Pressure Coolant Carrying 55° Positive Rhombic Inserts for Swiss Automatic Machines
PCACR/L-JHP
Lever Lock Tools with High Pressure Coolant Channels for 80° Positive Rhombic Inserts for Swiss Automatic Machines
SVJCR/L-3-JHP
Screw Lock Toolholders for 35° Rhombic Inserts with 7° Clearance Angle and Channels for High Pressure Coolant
PVACR/L-JHP
Tools with Channels for High-Pressure Coolant Carrying 35° Positive Rhombic Inserts for Swiss Automatic Machines
SRGCR-12-JHP
Screw Lock Tools with Channels for High-Pressure Coolant Carrying Round Inserts with 7° Clearance Angle
ING-RCB/LCB
Double-Ended Precision Grooving Inserts with a Chipformer
ING/INGP-R/L
Precision Double-Ended Flat Top Grooving Inserts
PENTA 34F-RS/LS
Pentagonal Inserts for Face Grooving and Recessing Along Shafts up to .197" Depth of Cut at a Minimum of .866" Diameter
PCHPRS/LS
Perpendicular Shank Tools that Mount Pentagonal Inserts for Machining Next to Long Central Shafts
SDNCN-13-SL
Screw Lock Tools Carrying 55° Diamond Inserts with 7° Clearance Angle for High Rigidity in Profiling Applications
INGD-RCB/LCB
Single-Ended Precision Deep Grooving Inserts with a Chipformer
INGD-R/L
Precision, Single-Ended Flat Top Deep Grooving Inserts
INGT-R/L
Precision, Double-Ended Flat Top Deep Grooving Inserts
HM390 ETP-C#-10
90° Endmills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges
API PARTIAL PROFILE THREADING FLD
Double-Ended, Precision, Flat Top Partial Profile Threading Inserts
UNJ THREADING FLJ
Double-Ended, Precision, Flat Top Threading Inserts
UNJ THREADING FLJP
Double-Ended, Precision Threading Inserts with a Positive Rake
UNJ THREADING FLJF
Double-Ended, Precision Flat Top Threading Inserts
UNJ THREADING FLJK
Double-Ended, Precision Threading Inserts with a Positive Rake
60° PARTIAL PROFILE THREADING FLTP
Double-Ended Precision Positive Rake Threading Inserts
FFQ4 D-12
Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
ACME THREADING FLA
Double-Ended, Precision, Flat Top Threading Inserts
ACME THREADING FLAS
Double-Ended, Precision, Flat Top Threading Inserts
AMERICAN STANDARD BUTTRESS THREADING FLTB-A
Double-Ended, Precision, Flat Top Threading Inserts for 7° Lead
AMERICAN STANDARD BUTTRESS THREADING FLTB-B
Double-Ended, Precision, Flat Top Threading Inserts for 45° Lead
API ROUND THREADING FLDC-RD-75
Double-Ended, Precision, Flat Top Threading Inserts
API ROUND THREADING FLDC-RD-75-CB
Double-Ended, Precision, Threading Inserts with a Chipbreaker
API ROUND THREADING FLDC-RD-75M
Double-Ended Precision, Flat Top Multi-Tooth Threading Inserts
NPT THREADING FLDC-V-75
Double-Ended, Precision, Flat Top Threading Inserts
FFQ4 D-17
Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
FFQ4 D-09
Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
FFQ4 D-W-09
Fast Feed Endmills Carrying Single-Sided Inserts with 4 Cutting Edges
FFQ4 D-M-09
Fast Feed Endmills with FLEXFIT Threaded Adaptation Carrying Single-Sided Inserts with 4 Cutting Edges
HM390 TPK-10
Extended Flute Endmills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges
PICCO R/L 060-N
Inserts with Inner Coolant Channel for Internal Turning and 45° Chamfering
DCN C-3D
Drill Body with Exchangeable Heads, Internal Coolant Holes and a Cylindrical Shank, Drilling Depth 3xD
SVJCR/L-PAD-JHP
Screw Lock Adapter with High-Pressure Coolant Mounts 35° Diamond Inserts with a 7° Clearance Angle
NQCH-Y-SVJCR-S-JHP
Y-Axis Screw Lock JETCUT Modular Heads Carrying 35° Rhombic Inserts with 7° Clearance Angle for Swiss-Type Machines
Y-SVJCR-S
Y-Axis Screw Lock Integral Tools Carrying 7° Clearance 35° Rhombic Inserts for Swiss-Type Machines
Y-SVJCR-S-JHP
Y-Axis Screw Lock JETCUT Integral Tools Carrying 7° Clearance 35° Rhombic Inserts for Swiss-Type Machines
FFQ4 D-W-06
Fast Feed Endmills Carrying Single-Sided Square Inserts with 4 Cutting Edges
CAR-CC
Side Lock Insert Holders for BSFD MB Boring Heads
CAR-V-I/IG
Side Lock Insert Holders for BSFD-V-I Boring Heads
BAR-DX-CC0602-HI
Sliding Insert Holders for BSFD-H/I Boring Heads
AV C#-SEM
Anti-Vibration Shell Mill Holders with Coolant Holes and CAMFIX (ISO 26623-1) Shanks
FFQ4 D-M-06
Fast Feed Endmills with FLEXFIT Threaded Adaptation Carrying Single-Sided Square Inserts with 4 Cutting Edges
Y-SCHR-22BF
Y-Axis Screw Lock Integral Tools Carrying SWISSCUT Inserts for Grooving and Turning on Swiss-Type Machines
Y-SCHR-22BF-JHP
Y-Axis Screw Lock JETCUT Integral Tools for SWISSCUT Inserts for Grooving and Turning on Swiss-Type Machines
MM EOBA
Interchangeable Oval-Shaped (Barrel) Solid Carbide Heads for 3D Aluminum Profiling
MTECBF-W
Solid Carbide Internal or External Threading Endmills with a Coolant Hole. Intended for BSF/BSP Thread Profiles.
PICCO R/L 080-N (Back Turning)
Inserts with Inner Coolant Channel for Internal Back Turning
PICCO R/L 004-007-N (Full radius)
Full Radius Inserts with Inner Coolant Channel for Internal Profiling
MM EOB
Interchangeable Oval-Shaped (Barrel) Solid Carbide Heads for 3D Profiling
P290 ACK-M
Extended Flute Endmills with FLEXFIT Threaded Adaptation Carrying .472" Long Edged Inserts
GD-DH
Gundrills Carrying Triangular Inserts Featuring 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
SCIR/L-22-NX
Grooving and Turning Inserts with a Chipformer
PCLNR/L-4-JHP
Lever Lock Toolholders for 80° Negative Rhombic Inserts with Channels for High-Pressure Coolant
DCN A-3D
Drill Body with Exchangeable Heads, Internal Coolant Holes and One Flat Shank, Drilling Depth 3xD
MIUR 8
45° Full Radius Internal Undercutting Inserts
FSHDR
Tools with a Very Strong Insert Grip for Interrupted Cuts and Back Turning Aluminum Wheels
PCLNR
Lever Lock Tools Carrying the 80° Negative Rhombic Inserts
HCM D.38
Ball Nose Multifunction Endmills D=.375"
HTP-M-LN06
Side Plungers with FLEXFIT Threaded Connection Carrying Tangentially Clamped Inserts with 4 Cutting Edges
SOF45
Multifunction Face Mills for Octagonal, Square and Round Insert Shapes with Various Entry Angles
SVANR/L-FS
Screw Lock Holders for Negative, 35° Inserts with a Wedge for High Rigidity in Profiling Applications
FGMA
Double-Ended Full Radius Utility Inserts, for Machining Aluminum at Medium-to-High Feeds, Cut Arcs to 250°
HCM-M
Ball Nose Multifunction Endmills with FLEXFIT Threaded Adaptation
PICCO R/L 080
Inserts for Internal Back Turning
HCM D.50
Ball Nose Multifunction Endmills D=.500"
PICCO R/L 004-007 (Radius)
Full Radius Inserts for Internal Profiling
FGHR
Tools for Interrupted Cuts and Back Turning of Aluminum Wheels
HGHR/L-3
Integral Holders for Face Grooving and Turning
E-STFPR
Screw Lock Boring Bars for 11° Clearance Triangular Inserts
HM90 E90AD-M-15
90° Endmills with a FLEXFIT Threaded Adaptation Carrying HM90 ADKT-1505... Inserts
PICCO-55°-Thread
Inserts for 55° Internal Thread Profile
PLX
Side Shell Mill Plungers Carrying XCMT 120408TR Inserts
C#-SER/L
External Threading Tools with CAMFIX Exchangeable Shanks
PCLNR/L-X
Lever Lock Tools Carrying CNMX/CNMG 80° Rhombic Inserts
HCM D.625
Ball Nose Multifunction Endmills D=.625"
SCIR/L-22-AR/AL
Turning Inserts with a Front Relief Angle
PCLNR/L-X-JHP
Lever Lock Tools with Channels for High Pressure Coolant Carrying the CNMX/CNMG 80° Rhombic Inserts
TPS UNC (HSS)
HSS Spiral Flute Machine Taps Unified Coarse Threads for a Wide Range of Materials
TPS UNF (HSS)
HSS Spiral Flute Machine Taps - Unified Fine Threads for a Wide Range of Materials
HM390 ETP-MMT
90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying HM390 TPKT 1003... Triangular Inserts
DGN-C-XL
Extra Long Parting and Grooving Inserts for Parting Bars Up to 2.56" Diameters, Hard Materials and Tough Applications
ACME THREADING FLA-PT-E
Double-Ended, Precision, Flat Top External Threading Inserts
GDH-MKT
Gundrill Heads Carrying Triangular Inserts with 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
PCLXR/L-S
Lever Lock Tools Carrying CXMG 80° Rhombic Inserts for Swiss type Automatic Lathes
PCLXR/L-S-JHP
Lever Lock Tools with JETCUT Coolant System Carrying CXMG 80° Rhombic Inserts for Swiss-Type Automatic Lathes
PICCO-55°-N (55° Threading)
Inserts with Inner Coolant Channel for 55° Internal Threading Profile
GD-DHL (.472-.512)
Gundrills Carrying Indexable Inserts with 2 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
GD-DH (.500)
Gundrills Carrying Indexable Inserts with 2 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
HM390 ETP-MM-05
90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying HM390 TPKT 0502... Triangular Inserts
HM390 ETP-MM-04
90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying HM390 TPKR 0401... Triangular Inserts
PCLXR/L-JHP
Lever Lock Tools with Channels for High-Pressure Coolant Carrying CXMG 80° Rhombic Inserts
PCLXR/L
Lever Lock Tools Carrying CXMG 80° Rhombic Inserts
SCIR/L-41-AR/AL
Turning Inserts with a Front Relief Angle
GD-DH (.437)
Gundrills Carrying Indexable Inserts with Single Chip Splitting Cutting Edge and a Wiper for High Hole Surface Quality
NQCH-PCLXR/L-S-JHP
Lever Lock JETCUT Modular Heads Carrying Positive Double-Sided 80° Rhombic Inserts for Swiss-Type Machines
GD-DHL (1.125)
Gundrills Carrying Indexable Inserts with 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
SCLXR/L 2X
Screw Lock Carrying CXMU 80° Rhombic Inserts
SCLXR/L 2XS
Screw Lock Carrying CXMU 80° Rhombic Inserts for Swiss-Type Automatic Lathes
SCLXR/L 2X-JHP
Screw Lock Tools with Channel for High-Pressure Coolant Carrying CXMG 80° Rhombic Inserts
SCLXR/L 2XS-JHP-MC
Lever Lock Tools with JETCUT Coolant System Carrying CXMG 80° Rhombic Inserts for Swiss-Type Automatic Lathes
PICIN-A-SCLCR/L
PICCO Tools on which 80° Rhombic Inserts are Mounted
CCGT-F1M-12P
80° Rhombic Inserts with a 7° Positive Flank for Finish Turning on Soft Materials and High-Temp. Alloys.
CCGT-F1M-20P
80° Rhombic Inserts with a 7° Positive Flank for Semi-Finish and Finish Turning on Soft Materials and High-Temp. Alloys.
PICIN-SCLCR/L
Solid Carbide PICCO Tools Carrying 80° Rhombic Inserts
MM ELBA
Interchangeable Lens-Shaped (Barrel) Solid Carbide Heads for 3D Aluminum Profiling
DGN-J/JS-D
Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
PICCO R/L60°-N (60° Threading)
Inserts with a 60° Internal Thread Profile and Inner Coolant Channel for .094" Min. Bore Diameter
AVC-SVLCR/L-VH
Interchangeable Boring Heads Carrying 35° Rhombic Inserts with 7° Clearance
PDJNR/L-S
Lever Lock Tools Carrying the DNGP 220.. Double-Sided 55° Rhombic Inserts
MM ELB
Interchangeable Lens-Shaped (Barrel) Solid Carbide Heads for 3D Profiling
AVC-SVLCR/L
Interchangeable Boring Heads Carrying 35° Rhombic Inserts with 7° Clearance
AVC-SVUCR/L
Interchangeable Boring Heads Carrying 35° Rhombic Inserts with 7° Clearance
PDJNR/L-S
Lever Lock Tools Carrying DNGP 22.. Double-Sided 55° Rhombic Inserts
SOF45-R18
45° Face Mills Carrying Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges
CCGT-F1P
80° Rhombic Inserts with a Positive Flank for Very Low Finish Turning Conditions on Steel
DGN-J-XL
Extra Long Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
TPS M (HSS)
DIN 13 HSS Spiral Flute Machine Taps - Metric Coarse Threads for a Wide Range of Materials
TPS MF (HSS)
DIN 13 HSS Spiral Flute Machine Taps - Metric Fine Threads for a Wide Range of Materials
PDJNR/L-JHP
Lever Lock Tools with Channels for High Pressure Coolant Carrying 55° Negative Rhombic Inserts
HM390 ETD-15
90° Endmills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges
HCM D.75
Ball Nose Multifunction Endmills D=.750"
PICCO ISO Full Profile Fine
ISO Fine Pitch Inserts for Full Profile Threads
PDJNR/L
Lever Lock Tools Carrying 55° Negative Rhombic Inserts
PQLCR-S
Side Lever Lock Tools Carrying the 80° Positive 4-Cornered Inserts for Swiss Automatic Machines
E-PWLNR-HEAD
Lever Lock Interchangeable Boring Heads for Negative WNMG Trigon Inserts, Clamped on a Solid Carbide Shank
CAT-SRKIN
Thermal Shrink Chucks with Integral Caterpillar Form AD/B Tapered Shanks for Solid Carbide HSS and Steel Tools
3M E90AX
90° Endmills Carrying 3M AXKT...Inserts
CRGNR
Clamp Lock Toolholders for Ceramic Round Negative Inserts
MCLNR/L
Comlock Tools Carrying 80° Negative Rhombic Inserts
PICCO R/L-60°-Thread
Inserts with a 60° Internal Thread Profile for .094" Min. Bore Diameter
MWLNR/L-W
Top Wedge Lock External Tools Carrying Trigon Inserts
MDJNR/L
Comlock 93° Lead Angle Holders for Negative 55° Inserts
TPG M-S (HSS)
HSS Gun Point Machine Taps According to DIN 13 - ISO Metric Coarse Threads on Steel with Good Machinability
CAT-SRK
Thermal Shrink Chucks with Caterpillar Form AD Tapered Shanks, for Carbide Tools Only
RM-BN-H7SA
Quick Change Straight Flute Interchangeable Solid Carbide Reaming Heads for High Speed Reaming Blind Holes
DCN R-3D
Drill Body with Exchangeable Heads, Internal Coolant Holes and a Cylindrical Shank, Drilling Depth 3xD
PICCO ISO Full Profile
ISO Standard Inserts for Full Profile Threads
HCM D1.0
Ball Nose Multifunction Endmills D=1.000"
HM390 FTD-15
90° Face Mills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges
HM390 FTP-10
90° Face Mills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges
HM390 FTC-07
90° Face Mills Carrying HM390 TCKT 0703 Triangular Inserts with 3 Helical Cutting Edges
HM390 FTD-19
90° Face Mills Carrying HM390 TDKT 1907 Triangular Inserts with 3 Helical Cutting Edges
AVC-DVUNR/L
Interchangeable Boring Heads Carrying 35° Rhombic Inserts
TPG M-W (HSS)
HSS-E 5% Co Gun Point Machine Taps According to DIN 13 for ISO Metric Coarse Threads on Steel with Good Machinability
DCN C-8D
Drill Body with Exchangeable Heads, Internal Coolant Holes and a Cylindrical Shank, Drilling Depth 8xD
DCN C-12D
Drill Body with Exchangeable Heads, Internal Coolant Holes and a Cylindrical Shank, Drilling Depth 12xD
DCN C-5D
Drill Body with Exchangeable Heads, Internal Coolant Holes and a Cylindrical Shank, Drilling Depth 5xD
VNGA (CBN)
Negative 35° Rhombic Inserts with a Single CBN Tip and Flat Rake Angle for Hardened Steel and Cast Iron
VNGA (PCD)
Negative 35° Rhombic Inserts with a Single PCD Tip and Flat Rake Angle for Finishing Non-Ferrous Materials
VNGA 2MT (CBN)
Negative 35° Rhombic Inserts with 2 Single CBN Mini Tips for Hardened Steel and Cast Iron
VNGA 2MT MM (CBN)
Negative 35° Rhombic Inserts with 2 MM Chipbreaking CBN Mini Tips for Hardened Steel and Cast Iron
VNGA 4MT (CBN)
Negative 35° Rhombic Inserts with 4 Single CBN Mini Tips for Hardened Steel and Cast Iron
VNGA 4MT MM (CBN)
Negative 35° Rhombic Inserts with 4 MM Chipbreaking CBN Mini Tips for Hardened Steel and Cast Iron
VNGA MT (CBN)
Negative 35° Rhombic Inserts with a Single CBN Mini Tip for Hardened Steel and Cast Iron
VNGA MT (PCD)
Negative 35° Rhombic Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials
WNGA (CBN)
Negative 80° Trigon Inserts with a Single CBN Tip and Flat Rake Angle for Hardened Steel and Cast Iron
WNGA (PCD)
Negative 80° Trigon Inserts with a Single PCD Tip and Flat Rake Angle for Finishing Non-Ferrous Materials
VCGW 2MT MM (CBN)
Positive 35° Rhombic Inserts with 2 MM Chipbreaking CBN Mini Tips for Hardened Steel and Cast Iron
CCGW MT (CBN)
Positive 80° Rhombic Inserts with a Single CBN Mini Tip Flat Rake Angle for Hardened Steel and Cast Iron
CCGW MT (PCD)
Positive 80° Rhombic Inserts with a Single PCD Mini Tip Flat Rake Angle for Finishing Non-Ferrous Materials
CCGW 2MT (CBN)
Positive 80° Rhombic Inserts with 2 CBN Mini Tips and Flat Rake Angle for Hardened Steel and Cast Iron
RPGN HS (CBN)
Positive Round Type Half Solid Top CBN Inserts
RPGN HS (PCD)
Positive Round Type Half Solid Top PCD Inserts
SCGW (CBN)
Positive Square Inserts with Single CBN Top Corner Tip for Hardened Steel and Cast Iron
SCGW (PCD)
Positive Square Inserts with Single PCD Top Corner Tip for Finishing Non-Ferrous Materials
SCGW 4MT (CBN)
Positive Square Inserts with Single 4 CBN Mini Tips for Hardened Steel and Cast Iron
SCGW L (CBN)
Positive Square Inserts with Full-Edge CBN Tip (Right or Left Hand) for Hardened Steel and Cast Iron
SCGW L (PCD)
Positive Square Inserts with Full-Edge PCD Tip (Right or Left Hand) for Finishing Non-Ferrous Materials
SCGW MT (CBN)
Positive Square Inserts with a Single CBN Mini Tip for Hardened Steel and Cast Iron
SCGW MT (PCD)
Positive Square Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials
SNGA (CBN)
Negative Square Inserts with Single CBN Top Corner Tip for Hardened Steel and Cast Iron
SNGA (PCD)
Negative Square Inserts with Single PCD Top Corner Tip for Finishing Non-Ferrous Materials
SNGA 4MT (CBN)
Negative Square Inserts with Single 4 CBN Mini Tips for Hardened Steel and Cast Iron
SNGA MT (CBN)
Negative Square Inserts with a Single CBN Mini Tip for Hardened Steel and Cast Iron
SNGA MT (PCD)
Negative Square Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials
SNGN (CBN)
Negative Square Inserts with Single CBN Top Corner Tip for Hardened Steel and Cast Iron
SNGN (PCD)
Negative Square Inserts with Single PCD Top Corner Tip for Finishing Non-Ferrous Materials
SNGN 4MT (CBN)
Negative Square Inserts with Single 4 CBN Mini Tips for Hardened Steel and Cast Iron
SNGN HS (CBN)
Negative Square Type Half Solid Top CBN Inserts
SNGN HS (PCD)
Negative Square Type Half Solid Top PCD Inserts
SNGN MT (CBN)
Negative Square Inserts with a Single CBN Mini Tip for Hardened Steel and Cast Iron
SNGN MT (PCD)
Negative Square Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials
SPGN (CBN)
Positive Square Inserts with Single CBN Top Corner Tip for Hardened Steel and Cast Iron
SPGN (PCD)
Positive Square Inserts with Single PCD Top Corner Tip for Finishing Non-Ferrous Materials
SPGN 4MT (CBN)
Positive Square Inserts with Single 4 CBN Mini Tips for Hardened Steel and Cast Iron
SPGN MT (CBN)
Positive Square Inserts with a Single CBN Mini Tip for Hardened Steel and Cast Iron
SPGN MT (PCD)
Positive Square Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials
SPGW (CBN)
Positive Square Inserts with Single CBN Top Corner Tip for Hardened Steel and Cast Iron
SPGW (PCD)
Positive Square Inserts with Single PCD Top Corner Tip for Finishing Non-Ferrous Materials
TBGN HS (CBN)
Positive 60° Triangular Type Half Solid Top CBN Inserts
TBGN HS (PCD)
Positive 60° Triangular Type Half Solid Top PCD Inserts
TCGN HS (CBN)
Positive 60° Triangular Half Solid Top CBN Inserts
TCGN HS (PCD)
Positive 60° Triangular Half Solid Top PCD Inserts
TCGT (PCD)
Positive 60° Triangular Inserts with Single PCD Top Corner Tip and Positive Rake for Finishing Non-Ferrous Materials
TCGT L (PCD)
Positive 60° Triangular Inserts with Full-Edge PCD Tip (Right or Left Hand) for Finishing Non-Ferrous Materials
TCGT MD/RD (PCD)
Positive 60° Triangular Inserts with MD/RD Chipbreaking PCD Tips for Non-Ferrous Metals Finishing & Medium App.
TCGW (CBN)
Positive 60° Triangular Inserts with Single CBN Top Corner Tip for Hardened Steel and Cast Iron
TCGW (PCD)
Positive 60° Triangular Inserts with Single PCD Top Corner Tip for Finishing Non-Ferrous Materials
TCGW -3MT (CBN)
Positive 60° Triangular Inserts with 3 CBN Single Mini Tips for Hardened Steel and Cast Iron
TCGW L (CBN)
Positive 60° Triangular Inserts with Full-Edge CBN Tip (Right or Left Hand) for Hardened Steel and Cast Iron
TCGW L (PCD)
Positive 60° Triangular Inserts with Full-Edge PCD Tip (Right or Left Hand) for Finishing Non-Ferrous Materials
TCGW MT (CBN)
Positive 60° Triangular Inserts with Single CBN Mini Tips for Hardened Steel and Cast Iron
TCGW MT (PCD)
Positive 60° Triangular Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials
TNGA (CBN)
Negative 60° Triangular Inserts with Single CBN Top Corner Tip for Hardened Steel and Cast Iron
TNGA (PCD)
Negative 60° Triangular Inserts with a Single PCD Tip for Machining Non-Ferrous Materials
TNGA -3MT (CBN)
Negative 60° Triangular Inserts with 3 CBN Single Mini Tips for Hardened Steel and Cast Iron
TNGA MT (CBN)
Negative 60° Triangular Inserts with a Single CBN Mini Tip for Hardened Steel and Cast Iron
TNGA MT (PCD)
Negative 60° Triangular Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials
TNGN (CBN)
Negative 60° Triangular Inserts with Single CBN Top Corner for Hardened Steel and Cast Iron
TNGN (PCD)
Negative 60° Triangular Inserts with a Single PCD Tip for Machining Non-Ferrous Materials
TNGN S (CBN)
Negative 60° Triangular Solid Top CBN for Cast Iron Machining
TPGN (CBN)
Positive 60° Triangular Inserts with Single CBN Top Corner Tip for Hardened Steel and Cast Iron
TPGN (PCD)
Positive 60° Triangular Inserts with a Single PCD Tip for Machining Non-Ferrous Materials
TPGN -3MT (CBN)
Positive 60° Triangular Inserts with 3 CBN Single Mini Tips for Hardened Steel and Cast Iron
TPGN HS (CBN)
Positive 60° Triangular Half Solid Top CBN Inserts
TPGN HS (PCD)
Positive 60° Triangular Half Solid Top PCD Inserts
TPGN MT (CBN)
Positive 60° Triangular Inserts with a Single CBN Mini Tip for Hardened Steel and Cast Iron
TPGN MT (PCD)
Positive 60° Triangular Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials
TPGT (PCD)
Positive 60° Triangular Inserts with a Single PCD Tip for machining Non-Ferrous Materials
TPGW (CBN)
Positive 60° Triangular Inserts with Single CBN Top Corner Tip for Hardened Steel and Cast Iron
TPGW (PCD)
Positive 60° Triangular Inserts with a Single PCD Tip for machining Non-Ferrous Materials
TPGW MT (CBN)
Positive 60° Triangular Inserts with a Single CBN Mini Tip for Hardened Steel and Cast Iron
TPGW MT (PCD)
Positive 60° Triangular Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials
VBGT (PCD)
Positive 35° Rhombic Inserts with PCD Top Corner Tip and Positive Rake for Finishing Non-Ferrous Materials
VBGW (CBN)
Positive 35° Rhombic Inserts with Single CBN Top Corner Tip for Hardened Steel and Cast Iron
VBGW (PCD)
Positive 35° Rhombic Inserts with Single PCD Top Corner Tip for Finishing Non-Ferrous Materials
VBGW 2MT (CBN)
Positive 35° Rhombic Inserts with 2 Single CBN Mini Tips for Hardened Steel and Cast Iron
VBGW MT (CBN)
Positive 35° Rhombic Inserts with a Single CBN Mini Tip for Hardened Steel and Cast Iron
VBGW MT (PCD)
Positive 35° Rhombic Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials
DNGA (CBN)
Negative 55° Rhombic Inserts & Negative Relief Angle with Single CBN Tip for Finishing Hardened Steel and Cast Iron
DNGA (PCD)
Negative 55° Rhombic Inserts & Negative Relief Angle with Single PCD Tip for Finishing Non-Ferrous Materials
DNGA 2MT (CBN)
Negative 55° Rhombic Inserts with 2 CBN Mini Tips and Wiper for Hardened Steel and Cast Iron
DNGA 2MT MM (CBN)
Negative 55° Rhombic Inserts with 2 MM Chipbreaking CBN Mini Tips for Hardened Steel and Cast Iron
DNGA 4MT (CBN)
Negative 55° Rhombic Inserts with 4 CBN Mini Tips and Wiper for Hardened Steel and Cast Iron
DNGA 4MT MM (CBN)
Negative 55° Rhombic Inserts with 4 MM Chipbreaking CBN Mini Tips for Hardened Steel and Cast Iron
DNGA MT (CBN)
Negative 55° Rhombic Inserts with a Single CBN Mini Tip for Hardened Steel and Cast Iron
DNGA MT (PCD)
Negative 55° Rhombic Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials
DPGW (CBN)
Positive 55° Rhombic Inserts with Single CBN Top Corner Tip for Hardened Steel and Cast Iron
DPGW (PCD)
Positive 55° Rhombic Inserts with Single PCD Top Corner Tip for Finishing Non-Ferrous Materials
ECGT (PCD)
Positive 75° Rhombic Inserts with Single PCD Top Corner Tip and Positive Rake for Finishing Non-Ferrous Materials
ECGW (CBN)
Positive 75° Rhombic Inserts with Single CBN Top Corner Tip for Hardened Steel and Cast Iron
ECGW (PCD)
Positive 75° Rhombic Inserts with Single PCD Top Corner Tip for Finishing Non-Ferrous Materials
EPGT (PCD)
Positive 75° Rhombic Inserts with Single PCD Top Corner Tip and Positive Rake for Finishing Non-Ferrous Materials
EPGW (CBN)
Positive 75° Rhombic Inserts with Single CBN Top Corner Tip for Hardened Steel and Cast Iron
EPGW (PCD)
Positive 75° Rhombic Inserts with Single PCD Top Corner Tip for Finishing Non-Ferrous Materials
RBGN HS (CBN)
Positive Round Type Half Solid Top CBN Inserts
RBGN HS (PCD)
Positive Round Type Half Solid Top CBN Inserts
RCGN HS (CBN)
Positive Round Type Half Solid Top CBN Inserts
RCGN HS (PCD)
Positive Round Type Half Solid Top PCD Inserts
RCGW HS (CBN)
Positive Round Type Half Solid Top CBN Inserts
RCGW HS (PCD)
Positive Round Type Half Solid Top PCD Inserts
RNGN HS (CBN)
Negative Round Type Half Solid Top CBN Inserts
RNGN HS (PCD)
Negative Round Type Half Solid Top PCD Inserts
CCGW W-MT (CBN)
Positive 80° Rhombic Inserts with a Single CBN Wiper, Mini Tip and Flat Rake Angle for Hardened Steel and Cast Iron
CCGW W-MT (PCD)
Positive 80° Rhombic Inserts with a Single PCD Wiper, Mini Tip and Flat Rake Angle for Finishing Non-Ferrous Materials
CNGA (CBN)
Negative 80° Rhombic Inserts with Negative Relief Angles and Single CBN Tip for Finishing Hardened Steel and Cast Iron
CNGA (PCD)
Negative 80° Rhombic Inserts with Negative Relief Angle and Single PCD Tip for Finishing Non-Ferrous Materials
CNGA 2MT (CBN)
Negative 80° Rhombic Inserts with 2 CBN Mini Tips and Flat Rake Angle for Hardened Steel and Cast Iron
CNGA 2MT MM (CBN)
Negative 80° Rhombic Inserts with 2 MM Chipbreaking CBN Mini Tips for Hardened Steel and Cast Iron
CNGA 4MT (CBN)
Negative 80° Rhombic Inserts with 4 CBN Mini Tips and Flat Rake Angle for Hardened Steel and Cast Iron
CNGA 4MT MM (CBN)
Negative 80° Rhombic Inserts with 4 MM Chipbreaking CBN Mini Tips for Hardened Steel and Cast Iron
CNGA MT (CBN)
Negative 80° Rhombic Inserts with a Single CBN Mini Tip for Hardened Steel and Cast Iron
CNGA MT (PCD)
Negative 80° Rhombic Inserts with a Single PCD Mini Tip for Finishing Non-Ferrous Materials
CNGA W-2MT (CBN)
Negative 80° Rhombic Inserts with 2 CBN Wiper and Mini Tip for Hardened Steel and Cast Iron
CNGA W-MT (CBN)
Negative 80° Rhombic Inserts with a Single CBN Wiper with a Mini Tip for Hardened Steel and Cast Iron
CNGA W-MT (PCD)
Negative 80° Rhombic Inserts with a Single CBN Wiper and Mini Tip for Finishing Non-Ferrous Materials
CNGN S (CBN)
Negative 80° Rhombic Solid CBN Inserts for High-Feed High-Depth Roughing & High-Speed Finishing of Cast Iron
DNGN (CER)
Negative 55° Rhombic Double-Sided Ceramic Inserts for Machining Cast Iron and Hardened Steel
SPGN (CER)
Positive Square Ceramic Inserts for Machining Cast Iron and Hardened Steel
RBGX (CER)
Positive Round Ceramic Inserts for Machining Cast Iron and Hardened Steel
RBGN (CER)
Positive Round Ceramic Inserts for Machining Cast Iron and Hardened Steel
LNMN (CER)
Negative Rectangular Ceramic Inserts for Roll Turning
AVC-PXJNR/L
Interchangeable Boring Heads Carrying 70° Rhombic Inserts
SCD-PICCO 3D
Solid Carbide Drills for Swiss and Small CNC Machines
MTECM-ISO
Solid Carbide Internal Threading Endmill Step Release, Lead x3 With Coolant Holes, Used for ISO Thread Profile.
MTECM-UN
Solid Carbide Internal Threading Endmill Step Release, Lead x3 With Coolant Hole, Used for UN Thread Profiles.
MTECK-ISO
Solid Carbide Internal Threading Endmill Step Release, Lead x2 With Coolant Hole, Used for ISO Thread Profile.
MTECK-UN
Solid Carbide Internal Threading Endmill Step Release, Lead x2 With Coolant Hole, Used for UN Thread Profiles.
D3N R-10D
Exchangeable Head 3 Flute Drills with Coolant Holes and a Round Shank, Drilling Depth 10xD
AVC-SCLXR/L-06X
Screw Lock Tools Carrying CXMU 80° Rhombic Inserts
TJS TR-FC
Coolant Driven High Speed Compact Spindles for use with Modular Tooling Systems
D3N A-8D
Exchangeable Head 3 Flute Drills with Coolant Holes and One Flat Shank, Drilling Depth 8xD
D3N R-8D
Exchangeable Head 3 Flute Drills with Coolant Holes and Round Shank, Drilling Depth 8xD
ISTR-IC
Single Tube Trepanning Drills with Inner Single Start Thread, Cartridges and Adjustable Diameter (3.937-12.047" dia.)
NQCH-SDACR/L-S-JHP
Screw Lock JETCUT Modular Heads Carrying 7° Clearance 55° Rhombic Inserts for Swiss-Type Machines
SBTB-JHP-T/R
JETCUT Base Holders for Back-End Machining Heads Intended for Swiss-Type Machines
TJS-GJET-ER32
Coolant Driven High Speed Compact Spindles with ER32 Shanks
TJS-GJET-BT
Coolant Driven High Speed Compact Spindles with BT Shanks
TJS-GJET-CAT
Coolant Driven High Speed Compact Spindles with Caterpillar Tapered Shanks
DNMG-F3S
Double-Sided 55° Rhombic Inserts for Titanium and Heat Resistant Materials for Finishing Applications
TJS HPC BT
High-Pressure Coolant Driven HSM Spindle with BT Shank for Small Diameter Cutting Tools
TJS HPC ER
High-Pressure Coolant Driven HSM Spindle with ER32 Shank for Small Diameter Cutting Tools
C#-PCLNN
Lever Lock Tools with CAMFIX Shanks Carrying the 80° Negative Rhombic Inserts
C#-PDXNL
Lever Clamp Tools with CAMFIX Shanks Carrying the Negative 55° Rhombic Inserts
MS##-##-MG-JHP
Toolholders for INDEX CNC Multi-Spindle Machines with Internal Coolant Supply for MODULAR-GRIP Adapters
MM TS-C
Interchangeable Solid Carbide Circlip Groove Milling Heads Conform to DIN 471/472
PNMT 0602-TN
Pentagonal Inserts for Upper and Bottom Chamfering
AV-D
Anti-Vibration Bars with Through Coolant for Interchangeable Heads
D3N A-3D
Exchangeable Head 3 Flute Drills with Coolant Holes and One Flat Shank, Drilling Depth 3xD
D3N A-5D
Exchangeable Head 3 Flute Drills with Coolant Holes and One Flat Shank, Drilling Depth 5xD
SCIR/L-41-BRA/BLA
Back Turning Inserts
SCIR/L-41-ERA/ELA
Back Turning Inserts for Short Chipping Materials
SGST
Thin Slitting Cutters Carrying SLIMGRIP Inserts
A-SVQNR/L-AL-JHP
Screw Lock Boring Bars Carrying 35° Rhombic Inserts
DNGG-M3N
Double-Sided Sharp-Edged Positive and Polished Rake Inserts for Finishing Aluminum and Other Non-Ferrous Materials
AVC-PCLNR/L
Interchangeable Boring Heads Carrying 80° Rhombic Inserts
AVC-PCLXR/L
Interchangeable Boring Heads Carrying 80° Rhombic Inserts
AD-SET
Pocket Reducer Adapter for Turning Inserts
CR LNHT
Boring Cartridge with Tangential Insert for BHR MB50-50X100 Boring Head
CR SOMT
Boring Cartridge with Square Insert for BHR MB50-50X100 Boring Head
MM GRIT-4T8/6T10
Interchangeable Solid Carbide Small Diameter Groove Milling Heads
MM GRIT-3T6
Interchangeable Solid Carbide Small Diameter Groove Milling Heads
THQR/L
Parting and Grooving Holder for a SELF-GRIP Mini Blades (SGAQ), Suitable for Swiss-Type Machines
VNGG-M3N
Double-Sided Sharp Edged Positive and Polished Rake Inserts for Finishing on Aluminum and Other Non-Ferrous Materials
PWLNR/L-S
Lever Lock External Turning Tools Carrying the WNGP 220.. Double-Sided Trigon Inserts
D3N R-1.5D
Exchangeable Head 3 Flute Drills with Coolant Holes and Round Shank, Drilling Depth: 1.5xD
D3N A-1.5D
Exchangeable Head 3 Flute Drills with Coolant Holes and One Flat Shank, Drilling Depth: 1.5xD
D3N R-3D
Exchangeable Head 3 Flute Drills with Coolant Holes and Round Shank, Drilling Depth: 3xD
D3N R-5D
Exchangeable Head 3 Flute Drills with Coolant Holes and Round Shank, Drilling Depth: 5xD
AVC-DDUNR/L-VH
Interchangeable Boring Heads Carrying 55° Rhombic Inserts
AVC-SDUCR/L-VH
Interchangeable Boring Heads Carrying 55° Rhombic Inserts with 7° Clearance
DNGA-J(CBN)
55° Rhombic 4-Cornered CBN Inserts for Machining Hardened Steel
PICCO R/L 070-N (Back Chamfering)
Back Chamfering Inserts with Inner Coolant Channel for Pre-Parting Operations
RM-BN-RC-RING
Runout Adjustment Rings for RM-BNT Reamer Holders
HSK A-SRKIN-CX
Thermal Shrink Chucks with HSK DIN69893 Form A Tapered Shank and Jet Coolant Grooves along the Shank Bore
TGSF-JHP
Slitting Cutters with Coolant Channels Carrying TANG-GRIP Inserts
AVC-SDUCR/L
Interchangeable Boring Heads Carrying 55° Rhombic Inserts with 7° Clearance
MM SS
Interchangeable Solid Carbide Heads for Milling Involute Spline Shafts According to DIN 5480
AVC-SCLCR/L
Interchangeable Boring Heads Carrying 80° Rhombic Inserts with 7° Clearance
AVC-DDUNR/L
Interchangeable Boring Heads Carrying 55° Rhombic Inserts
GFIS ER-ER
Floating Reamer ER Collet Chuck with ER Shank for High Speed Cutting Reamers
DNMG-CERMET
Double-Sided 55° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications
MM EPG
Single Flute MULTI-MASTER Engraving Tool Head
PTGNR/L-X-JHP
91° Lead Lever Lock Tools with Channels for High-Pressure Coolant Carrying Negative Triangular Inserts
XCMT-MG
Two Cutting Edged Internal Grooving Inserts for DR-MF Multifunction Tools
A-PTFNR/L-X/G
91° Lead Angle Lever Lock Boring Bars Carrying Negative TNMX or TNMG Triangular Inserts
EPXI
Solid Endmills with Right and Left-Hand Helix Flutes, Enables Changing Direction at Mid Cutting Height
CCMT-M3P
80° Rhombic Positive Flank Inserts for Medium Machining Conditions on Steel
A/E-SWLNR/L-04
Boring Bars Carrying WNGP 0403.. Double-Sided Trigon Inserts for Small Diameters
CAT-FC-ER
ER Collet Chucks with Caterpillar Face Contact AD Tapered Shanks
PWLNR/L-S
Lever Lock External Turning Tools Carrying WNGP 22.. Double-Sided Trigon Inserts
CCMT-F3M
80° Rhombic Positive Flank Inserts for Stainless Steel Finishing Applications
A-SDUCR/L-13-SL
Boring Bars Carrying 55° Rhombic Inserts with 7° Clearance Angle for High Rigidity in Profiling Applications
DNMM-R3P
Single-Sided 55° Rhombic Inserts for Rough Turning Applications on Steel
TPST MF-G (HSS)
DIN 13 HSS Straight Flute Machine Taps - ISO Metric Fine Threads for Grey Cast Iron
MM Dovetail
Interchangeable Solid Carbide Heads
MTECI-ISO
Small Diameter Single Point Internal ISO Profile Solid Carbide Thread Mills
MTECD-ISO
Small Diameter Short Left-Hand Cut. Solid Carbide Endmills for Internal ISO Profile Drilling, Threading and Chamfering.
DNMG-M3P
Double-Sided 55° Rhombic Inserts for Medium Machining Conditions on Steel
TPG UNF (HSS)
HSS Gun Point Machine Taps Unified Fine Threads for a Wide Range of Materials
DNMG-F3M
Double-Sided 55° Rhombic Inserts for Finish on Turning Stainless and Low Carbon Steel
TPG MF (HSS)
DIN 13 HSS Gun Point Machine Taps - ISO Metric Fine Threads for a Wide Range of Materials
TPG UNC (HSS)
HSS Gun Point Machine Taps - Unified Coarse Threads for a Wide Range of Materials
TPG M (HSS)
DIN 13 HSS Gun Point Machine Taps - ISO Metric Coarse Threads for a Wide Range of Materials
PWLNR/L-X-JHP
Lever Lock Tools with Channels for High Pressure Coolant Carrying the HELITURN LD WNMX or WNMG Trigon Inserts
PWLNR/L-4-JHP
Lever Lock Toolholders for Trigon Inserts with Channels for High Pressure Coolant
LOMX-H6P
Tangential Inserts with 4 Cutting Edges for High Metal Removal of up to 1.4" D.O.C. on Steel
PTGNR/L-X
91° Lead Angle Lever Lock External Turning Tools Carrying Negative Triangular Inserts
SOMX-HD
DR Drill Inserts for Carbon Steel and Soft Materials
SOMT-HD
DR Drill Inserts for Carbon Steel and Soft Materials
SCIR/L-22-BR/BL/BRA/BLA
Back Turning Inserts
SCIR/L-22-ER/EL/ERA/ELA
Back Turning Inserts for Short Chipping Materials
DNMG-F3P
Double-Sided 55° Rhombic Inserts for Semi-Finishing and Finishing on Steel
WOMG-5-T3P-IQ
Double-Sided 6° Negative Side Flank Trigon Inserts for High Feed Turning of Steel
IQ845 FSY-R07
50° Face Mills Carrying Square Inserts with 8 Cutting Edges
MF EWX-M
Moderate Feed Endmills with FLEXFIT Threaded Connection Carrying Double-Sided Inserts with 6 Cutting Edges
CGPAD-JHP
Adapters with High-Pressure Coolant Channels Carrying CUT-GRIP Inserts
FSPA/FSMA
Full Radius Precision Inserts for Machining Aluminum at Medium to High Feeds
LNMX 19/30
Tangentially Clamped Inserts for Railroad Wheel Re-Turning
C#-PWLNR/L-X-JHP
Lever Lock Tools with CAMFIX Shanks and Channels for High-Pressure Coolant, Carrying WNMX or WNMG Inserts
C#-PWLNR/L-08-JHP
Lever Lock Tools with CAMFIX Exchangeable Shanks and Channels for High-Pressure Coolant Carrying Trigon Inserts
DCN A-5D
Drill Body with Exchangeable Heads, Internal Coolant Holes and One Flat Shank, Drilling Depth 5xD
TGBHR/L-JHP
Grooving and Turning SUMO-GRIP Tools with Channels for High-Pressure Coolant
DNMG-M3M
Double-Sided 55° Rhombic Inserts for Machining Stainless and Low Carbon Steel
GHDR/L-JHP (short pocket)
Grooving and Turning Tools with Channels for High-Pressure Coolant
SKA-FC-MB
MB Modular Boring Connection System with DIN 69871 Face Contact AD Tapered Shanks
SXCIB
Broaching Holders for Lathe and Milling Machines
SOGX/T-AL
DR Drill Inserts for Aluminum
MG-SWUBR/L
Solid Carbide Bars for Internal Turning
DNMX-M3P
Double-Sided 55° Rhombic Inserts with High Helical Cutting Edge for High Metal Removal Rates
C#-PWLNR/L-X
Lever Lock Tools with CAMFIX Shanks Carrying HELITURN LD WNMX or WNMG Inserts
FF EWX-M
Fast Feed Endmills with FLEXFIT Threaded Connection Carrying Double-Sided Inserts with 6 Cutting Edges
C#-HELIR/L
External Tools for Turning, Grooving and Parting with CAMFIX Exchangeable Shanks
LPGIR/L
Inserts for Axial Grooves Inside Radial Grooves and for Radial Grooves Inside Axial Grooves
C#-SRKIN
Thermal Shrink Chucks with Integral CAMFIX (ISO 26623-1) Tapered Shanks for Solid Carbide, HSS and Steel Tools
PICCO R/L 520
Inserts for Internal Chamfering
CAT-HYDRO
Hydraulic Chucks with Coolant Holes and Caterpillar Form ADB Tapered Shanks
DNGA-2 (CBN)
55° Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys
DNGG-M4HF/M4HM (CBN)
55° Rhombic Inserts with 4 Chipbreaking CBN Tips for Machining Hardened Steel
WNMX-M3/4MW
Double-Sided Trigon Inserts for Machining Stainless Steel, High Temperature Alloys and Soft, Low Carbon Steel
MTECQ-ISO
Endmills with Through Tool Coolant and Reduced Neck Diameter for Deep Internal ISO Profile Threading
MTECQ-UN
Solid Carbide Endmills with Internal Coolant Holes and a Reduced Diameter Neck, for Deep Internal UN Profile Threading
RM-SET-T-B
Single-Edged Indexable Reamers for Through Holes
MTECZ-BSPT
Solid Carbide Threading Endmills with Coolant Holes for an Internal or External BSPT Thread Profile
MTECZ-ISO
Solid Carbide Internal Threading Endmills with Coolant Holes
DNGA-4 (CBN)
55° Rhombic 4-Cornered CBN Inserts for Machining Hardened Steel
PWLNR/L-X
Lever Lock External Turning Tools Carrying the HELITURN LD WNMX or WNMG Trigon Inserts
TGSF
Slitting Cutters Carrying TANG-GRIP Inserts
WNMX-M3/4PW
Double-Sided Trigon Inserts with High Helical Cutting Edge for High Metal Removal Rates
MTECS-MJ
Small Diameter Short Solid Carbide MJ-Type Profile Threading Endmills
MTECI-A60
60° Partial Profile Solid Carbide Thread Mills for Internal and External Threads
T490 LNMT/LNHT 0804
Tangentially Clamped Inserts with 4 Helical Cutting Edges
TCMT-PF
Triangular Inserts with a Positive Flank for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys
HSK A63WH-SVVNN-F
72.5° Lead Angle Tools with HSK Exchangeable Tapered Shanks Carrying 35° Negative Inserts
LNMX-WG
Tangentially Clamped Inserts with a Wiper Corner Design for High Production Cutting and Excellent Surface Finish
LNKX/LNMT 1106
Tangentially Clamped Inserts with a Very Positive Chipformer and Reinforced Cutting Edge
SOMX-DT
Inserts for DR Drills with a DT General Use Chipformer
ADJ ST-ER
FINEFIT DIN 6499 ER Collet Chucks with Center Alignment and Cylindrical Shanks with a Clamping Flat
SOMX-GF
Inserts with a GF Chipformer for Soft Materials Used on DR Drills
MTECS-ISO
Small Diameter Solid Carbide Threading Endmills for an Internal ISO Profile
MTECB-ISO
Solid Carbide Internal Threading Endmills with Coolant Holes for ISO Thread Profile
HSK A-SRK
Thermal Chucking Collets with HSK DIN69893 Form A Tapered Shanks for Solid Carbide Tools Only
DSDNN
45° Lead Angle R-Clamp External Turning Tools Carrying ISO Negative SNMG Inserts
UMGR-A55
Mini Indexable Inserts with Whitworth Partial Profile for Threading in .205" and Larger Holes
TPS M-N (HSS)
DIN 13 HSS R.H. 40° Spiral Flute Machine Taps - ISO Metric Coarse Threads for Low Alloyed Steel
CHAMRING
Drill Holders for Drilling and Chamfering in One Operation
DTGNR/L
91° Lead Angle R-Clamp External Turning Tools Carrying Negative Triangular Inserts
HBF-QF
220° Spherical Profile Inserts for Accurate Finishing, Up and Down Ramping and Undercutting
BT-FC-ER
ER Collet Chucks with BT MAS-403 Face Contact AD Tapered Shanks
ETS-LN08
Grooving and Slitting Cutters
ADJ HSK A-ER
DIN6499 ER Collet Chucks with Center Alignment (FINEFIT) and HSK DIN69893/A Tapered Shanks
ADJ BT-ER
DIN 6499 ER Collet Chucks with Center Alignment and BT MAS-403 ADB Tapered Shanks
MTECSH-ISO
Small Diameter Short Left-Hand Cut. Internal ISO Profile Threading Endmills for Hardened Steel
RM-SET-B-B
Single-Edged Indexable Reamers for Blind Holes
RM-SEI-A
Single-Edged Reaming Inserts for High Surface Quality at Low Cutting Conditions
RM-SEI-B
Single-Edged Reaming Inserts for General Applications at High Cutting Speeds
RM-SEI-C
Single-Edged Reaming Inserts for Aluminum and Brass
H490 E90AX-17
90° Endmills Carrying H490 ANKX 17... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
DRM-1D
Drilling/Milling Tools
SLFNR-TANG
Toolholders for LNMX Tangentially Clamped Inserts
HLPGR/L (Metric)
Tools for L-Type LPGIR/L Inserts
LNMX-HM
Tangential Inserts with a Positive Rake Angle for High Metal Removal on Soft and Ductile Materials
DNMG-VL
Double-Sided 55° Rhombic Inserts with a Chipformer for High Temperature Alloys and Stainless Steel Valves
LNMX-HT
Tangential Inserts with 4 Cutting Edges and a Positive Rake Angle for High Metal Removal Rates
HSK A-SRKIN
Thermal Shrink Chucks with HSK DIN69893 Form A Tapered Shanks
XCMT-TR
73° Rhombic, 7° Positive Flank Inserts for Plungers
MM TS-H
Interchangeable Solid Carbide T-Slot Milling Heads with Diverse Corner Radii
E-SDUCR-HEAD
Interchangeable Screw Clamped Boring Heads Carrying Positive 7° Clearance 55° Rhombic Inserts Mounted on Carbide Bars
IHRF-BW
Back Face Turning Toolholders for BHF Fine Boring Heads
RM-BNT (Shanks)
Shanks for the BAYO T-REAM Interchangeable Head Reamers
GEHIMR/L-SC
Internal Machining Solid Carbide Bars with Coolant Holes for Insert Widths Less than .075"
CAT-ODP (FLEXFIT)
FLEXFIT Threaded Adaptations with Integral Caterpillar Form ADB Tapered Shanks
GEHIMR/L
Internal Machining Boring Bars with Coolant Holes for Insert Widths Less than .075"
FGPA
Double-Ended Precision Inserts for Machining Aluminum at Medium-to-High Feeds, Cut Arcs to 250°
DNMG-WG
Double-Sided 55° Rhombic Wiper Inserts for High Surface Finish at High Feed Turning
MM TS-N
Interchangeable Solid Carbide T-Slot Milling Heads
UMGR-A60
Mini Indexable Inserts with a 60° Partial Profile for Threading in .205" and Larger Holes
DNMG-PF
Double-Sided 55° Rhombic Inserts for Finishing Applications on Alloyed and Stainless Steel
CAT-STUB-ARBOR
Stub Arbor Side-Clamp Holders with Caterpillar Tapered Shanks for Disk Cutters
ISO-ER
DIN 6499 ER Collet Chuck with an ISO Tapered Shank
GFI ST-ER
Floating Reamer DIN 6499 Collet Chucks and Cylindrical Shanks with a Clamping Flat
ST-ER-M (mini)
DIN 6499 ER Mini Collet Chucks with Cylindrical Shanks
MCRNR
Comlock 75° Lead Angle Holders for Negative 80° Inserts
GM
Endmills for Groove Milling, with GMP and GIPI/GIFI Inserts
GHIR/L (W=.078-.252)
Grooving and Turning Boring Bars
GHIR/L-C (W=.157-.252)
Grooving and Turning Bars with Internal Coolant Holes
GHIR-SC (W=.079-.138)
Grooving and Turning Solid Carbide Bars with Internal Coolant Holes
A-SXFOR
Boring Bars with Coolant Holes Using XOMT Inserts
PICCO R/L 070
Back Chamfering Inserts for Pre-Parting Operations
SGSF
Slitting Cutters Carrying Self-Clamped Inserts
CGHN-P8
Blades for Deep Grooving and Turning
CGHR/L-P8DG
Double-Ended Heavy Duty Self-Clamped Grooving and Turning Blades
DNMS-12
55° Rhombic Single-Sided Inserts for Soft and Nonferrous Materials
DNMA
Double-Sided 55° Rhombic Inserts for Short Chipping Materials such as Cast Iron
DNMG-GN
Double-Sided 55° Rhombic Inserts for General Applications
DNMG-NF
Double-Sided 55° Rhombic Inserts for Semi-Finishing and Finishing Applications
DNMG/DNGG-PP
55° Double-Sided Rhombic Inserts for Machining Very Ductile Materials under Medium Cutting Conditions
DNMG/DNGG-TF
Double-Sided 55° Rhombic Inserts for Machining a Wide Range of Materials under Medium Cutting Conditions
GSFU
Slitting and Grooving Full Radius Inserts
HELIR/L
External Holders for Turning, Grooving and Parting
GHMPR/L
Perpendicular Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts
GHMR/L
Toolholders for Shallow Radial and Axial Grooving with Narrow and Special Profile Inserts
GHMUR/L
External Holders for 45° Undercutting
SDPCN
Screw Lock Holders for 7° Clearance 55° Diamond Inserts
A/S-SVQCR/L
Screw Lock Boring Bars Carrying 35° Rhombic Inserts with 7° Clearance
XOMT-GF
Inserts for DR Drills and A-SXFOR/L Boring Bars, for Ductile Materials
DNGA (CER)
Negative 55° Rhombic Double-Sided Ceramic Inserts for Machining Cast Iron and Hardened Steel
DNMG/DNGG-SF
Double-Sided 55° Rhombic Inserts for Super Finishing; Controls Chip Flow at Very Low Feeds and Depths of Cut
S-SUXCR/L-CM
Screw Lock Boring Bars Carrying Four Different 7° Clearance Geometries
GIPA 8-35V (V-shape)
V-Shaped Inserts for Machining Aluminum Wheels
SOMT-DT
DR Drill Inserts for General Applications at Medium-to-High Feeds
SOMT-GF
DR Drill Inserts for Soft Materials at Low-to-Medium Feeds
GHIUR/L-C-A (15° & 27.5°) Bars
Internal Grooving and Turning Bars for Machining Aluminum Wheels
DNMG-NR
Double-Sided 55° Rhombic Inserts with a Special Chipformer for Heavy Machining
GPV
Precision Inserts for Grooving Multi V-Ribbed Pulleys
CCLNR
Clamp Lock Toolholders for Ceramic 80° Rhombic Negative Inserts
DNMA (CBN)
CBN Inserts with a Flat Rake for Machining Hardened Steel
HSK A-ER-M (mini)
DIN6499 ER Mini Collet Chucks with HSK DIN69893 Form A Tapered Shanks
BT-ER
DIN6499 ER Collet Chucks with BT MAS-403 ADB Tapered Shanks
R-8 ER
DIN 6499 ER Collet Chucks with Bridgeport Shanks
ER-SPR
DIN 6499/ ISO 15488-B ER Spring Collet with Super Finish Surface and Special Anti-Corrosion Protection
IHFF
Triangular Insert Holders for Mounting on MB Fine Boring Heads
SKA-MB
MB Modular Connection System with DIN69871 Form AD ISO 7388/1 Taper Shanks
IHSR
Rough Boring Tools For Twin Radial / Axial Edge Cutters Positioned Opposite Finishing Tools
APKT 1003PDTR-8M
Insert with Reinforced Helical Cutting Edge, for Interrupted Cut and Heavy Milling
HFAER/L-4
Adapters for External Facing Along Shafts
HFAIR/L-4
Adapters for Internal Face Grooving and Turning
HGAER/L-3
Adapters for External Facing Along Shafts
A-SXFOR-DR
Boring and Drilling Bars with Coolant Holes Carrying XOMT Inserts
KNMX
55° Parallelogram Profiling Inserts
HGFH
Parting and Grooving Blades for .118" GRIP Inserts
HFAER/L-5T, 6T
Adapters for External Facing Along Shafts
DGFH
Parting and Grooving Blades with and without Coolant Channels Carrying DO-GRIP and HELI-GRIP Inserts
APKR 1003PDR
High Positive Inserts for Machining Stainless Steel and High Temperature Alloys
APKT 1003..R
Inserts with Ground Large Corner Radii
APKT 1003..TR-RM
Inserts with Various Corner Radii and a Reinforced Cutting Edge for Interrupted Cut and Heavy Machining
APKT 1003PDR-HM
Inserts with 2 Helical Cutting Edges for General Use
APKT 1003PDTR-76
Inserts with 2 Helical Cutting Edges with Ribs Along the Edge for Interrupted Cuts
SGFFA
Reinforced Face Grooving Blades for Standard Tool Blocks
XOMT-DT
Inserts for DR Drills and Boring Bars
A-SVUNR/L
Boring Bars with Internal Coolant Holes Carrying 35° Negative Rhombic Inserts
DGFS
Blades for Multi-Spindle Machines, Replacement for HSS and Brazed Tools
E90AC
Drilling Endmills Carrying APKT/ADKT Inserts
GHFG-R/L-8
Holders for Face Grooving and Turning Along Shafts
DGFHR/L
Parting and Grooving Reinforced Blades Carrying DO-GRIP Inserts
HFHR/L-5T
Integral Toolholders for External Facing
HFHR/L-6T
Integral Toolholders for External Facing
HFHPR/L-M
Perpendicular Toolholders for Shallow Face Grooving
HFHR/L-M
Toolholders for Shallow Face Grooving
HFHR/L-3T
Integral Toolholders for External Facing
DGFHR/L-B-D..(R/L)
Reinforced Type Blades with Screw Clamping
CAT-ER (form ADB)
DIN 6499 ER Collet Chucks with Caterpillar form ADB Tapered Shanks
GEHIUR/L
Undercutting and Turning Boring Bars with Coolant Holes
ADJ BT
Center Alignment Shanks and Bases with BT MAS-403 ADB Tapered Shanks for Specially Tailored Toolholders
HFPAD-3
Adapters for Face Machining
HFPAD-4
Adapters for Face Machining
HFPAD-5
Adapters for Face Machining
HFPAD-6
Adapters for Face Machining
DR-MF-I-2.25D
Multifunction Drilling, Boring, Facing and External Turning Tool
DGFHL-26B-TR-D
Reinforced Blades with Screw Clamping for Traub and Index Machines
TPG M-H (HSS)
DIN 13 HSS Gun Point Machine Taps - ISO Metric Coarse Threads for Hardened Steel and H.T.A.
XCMT-MF
Inserts for DR-MF Multifunction Tools with Two Cutting Edges for Hard Materials and Interrupted Cut
CGFG 51-P8
Blades for Face Machining Carrying .315" Inserts
MIFR
Screw-Clamped Inserts for Internal Face Grooving and Turning, Penetration Diameter Range .315-.669"
GHDR-8A
External Tools for Turning, Grooving and Parting; Upper Jaw with Hard Coating to Sustain Chip Deflection
TNFFH-IQ
Face Grooving Blades
TNFFA-IQ
Reinforced Face Grooving Blades
DGFH-JHP
Parting and Grooving Blades with Channels for Low and High-Pressure Coolant Carrying DO-GRIP Inserts
MM ECD
NC Spot Drills for Accurate Hole Location without the need for a Bushing Guide.
HFFH
Face Grooving Blades
HFFA
Reinforced Face Grooving Blades
IQ845 SYHU-05
Square Inserts with 8 Cutting Edges
IQ845 FSY-R05
50° Face Mills Carrying Square Inserts with 8 Cutting Edges
DRG-MF
Multifunction Drilling, Boring, Facing, External Turning and Internal Grooving Tools
TGFHR/L-JHP
Parting and Grooving Reinforced Blades with Channels for High-Pressure Coolant Carrying TANG-GRIP Inserts
DGFHR/L-BC-JHP
Parting and Grooving Reinforced Blades with Channels for High-Pressure Coolant Carrying DO-GRIP Inserts
TAGPAD-XL-JHP
Extra Long Parting and Grooving Adapters with Channels for High-Pressure Coolant Carrying TANG-GRIP Inserts
HFPAD-JHP
Adapters for Face Machining
TNFPAD-XL-JHP
Adapters for Face Machining
C#-HYDRO HD
Hydraulic Chucks with CAMFIX Shanks
MNSNT
Indexable SUMOCHAM Inserts and Modular Shank Gundrills
TAGPAD-Y-JHP
Y-Axis Adapters for Parting & Grooving on Multi-Task Machines & Turning Centers with JHP Channels and TANG-GRIP Inserts
SH-D
Steel Boring Bars With Serrated Connection For AVC Heads
TGAD RE/LE-JHP
Parting and Grooving Adapters with Channels for High-Pressure Coolant Carrying TANG-GRIP Inserts
D/HGAD RE/LE-JHP
Parting and Grooving Adapters with Channels for High-Pressure Coolant Carrying DO-GRIP Inserts
PCAD RE/LE-JHP
Parting and Grooving Adapters with Channels for High-Pressure Coolant Carrying PENTA 24 Inserts
NQCH-Y-SDJCR-S-JHP
Y-Axis Screw Lock JETCUT Modular Heads Carrying 55° Rhombic Inserts with 7° Clearance Angle for Swiss-Type Machines
ISTR-EC
Single Tube Trepanning Drills with Outer 4-Start Thread, Cartridges, and Adjustable Diameter (3.937-12.913" dia.)
Y-PCHRS-17
Y-Axis Screw Lock Integral Tools Carrying 5 Edged Inserts for Grooving, Parting, and Recessing on Swiss-Type Machines
APKT 1003PDR-HM-CS
Chip Splitting Insert for Rough Steel Milling, Specially Made for Extended Flute Tools or Long Overhang Applications
EBAI-B3-EC
DLC coated 3 flute ball nose mills for machining Aluminum and other non-ferrous materials.
IDC-EC
Double Tube Counterboring Drills with Outer 4-Start Thread, Cartridges and Adjustable Diameter (1.575-7.243" dia.)
Y-PCHRS-17-JHP
Y-Axis Screw Lock JETCUT Integral Tools for 5 Edged Inserts for Grooving, Parting, and Recessing on Swiss-Type Machines
DCN-A-5D-BD
Exchangeable Head Drills with a Reinforced Body and a Flat Shank, Diameter Ratio 5xD, for Construction Beam Industry.
DCN-A-8D-BD
Exchangeable Head Drills with a Reinforced Body and a Flat Shank, Diameter Ratio 8xD, for Construction Beam Industry.
DFN A-5D-BD
Exchangeable Head Drills with a Reinforced Body and a Flat Shank, Diameter Ratio 5xD, for Construction Beam Industry
PICCO R/L 520-N (Chamfering)
Inserts with Inner Coolant Channel for Internal Chamfering
H690 F90AX-10
90° Face Mills Carrying H690 TNKX 1005.. Triangular Inserts with 6 Helical Cutting Edges
H690 E90AX-10
90° Endmills Carrying H690 TNKX 1005..Triangular Inserts with 6 Helical Cutting Edges
API BUTTRESS THREADING FLDC-B-E
Double-Ended, Precision, Flat Top Threading Inserts
TTADR/L-JHP
Adapters with Coolant Channels for High Pressure, Carrying Inserts with 10 Threading Corners
TPS M-A (HSS)
DIN 13 HSS Right-Hand 40° Spiral Flute Machine Taps for ISO Metric Coarse Threads on Aluminum and Aluminum Alloys
TPS M-W HE(HSS)
DIN 13 HSS Right-Hand 40° Spiral Flute Machine Taps for ISO Metric Coarse Threads on Steel with Good Machinability
FF EWX-MM
Fast Feed Endmills with MULTI-MASTER Threaded Connection That Mount Double-Sided Inserts with 6 Cutting Edges
DCN R-5D
Drill Body with Exchangeable Heads, Internal Coolant Holes and a Cylindrical Shank, Drilling Depth 5xD
HSK A63WH-SVJCR/L
Tools with HSK Exchangeable Tapered Shanks Carrying Positive 35° Inserts for Mounting at 15° on Turn-Mill Machines
SXCIR
Internal Toolholders for Specially Tailored Profile Inserts
S845 F45SX-16
45° Face Mills Carrying Economical Inserts with 8 Helical Right-Hand Cutting Edges
TPS M-H (HSS)
DIN 13 HSS Right-Hand 40° Spiral Flute Machine Taps - ISO Metric Coarse Threads for H.T.A.
C#-SLANR/L-TANG
Tools with CAMFIX Shanks Carrying the LNMX-HT Tangentially Screw Clamped Inserts for High Production Cutting
HP F90AN-07
90° Face Mills Carrying HP ANKT 0702.. Inserts
GAFG-R/L-8
Adapters for Face Machining
SCLCR/L
Screw Lock Tools Carrying 80° Diamond Inserts with 7° Clearance Angle
MWLNR/L-CA-W
Top Wedge Lock Cartridges Carrying the Negative Trigon Inserts
ADKT 1505ADR
Milling Inserts with a Reinforced Cutting Edge, for Heavy Machining Applications and General Use
HP E90AN-07
Endmills with HELIPLUS HP ANKT 0702.. Inserts
MM ECF
Interchangeable Solid Carbide Heads for Chamfering and Countersinking
CKJNR
Top Clamp Toolholders with 93° Lead Angle for Negative, 55° Parallelogram Inserts
HM90 F90AP-10
90° Face Mills Carrying HM90 APKT 1003... Inserts
TJS-GJET-C#
Coolant Driven High Speed Compact Spindles with CAMFIX (ISO 26623-1) Shanks
Y-SDJCR-S
Y-Axis Screw Lock Integral Tools Carrying 55° Rhombic Inserts with 7° Clearance Angle for Swiss-Type Machines.
IDC-EA
Double Tube Counterboring Drills with Outer 4-Start Thread, Cartridges and Adjustable Diameter (.984-1.574" dia.)
HM90 F90AP-AMT
90° Light Weight Face Cutters Carrying HM90 AP...T 1003 inserts
BT-C#-FC
CAMFIX (ISO 26623-1) Holders with BT MAS-403 Face Contact AD Tapered Shanks
CAT-C#-FC
CAMFIX (ISO 26623-1) Holders with Caterpillar Face Contact AD Tapered Shanks
TPS M-W HS(HSS)
DIN 13 HSS (M2) Right-Hand 40° Spiral Flute Machine Taps for ISO Metric Coarse Threads on Steel with Good Machinability
ISD-EF-FT
Deep Single Tube Drills with External 4-Start Thread Connection with Triangular Inserts (.630-1.575 dia.)
IDD-EF-FT
Deep Double Tube Drills with External 4-Start Thread Connection Carrying Triangular Inserts (.725-1.575 dia.)
ISD-IF-FT
Deep Single Tube Drills with Internal Single-Start Thread Connection with Triangular Inserts (.630-1.575 dia.)
SER/L-TT-JHP
External Threading Tools Carrying Inserts with 10 Threading Corners
DCN R-8D
Drill Body with Exchangeable Heads, Internal Coolant Holes and a Cylindrical Shank, Drilling Depth 8xD
DCN A-8D
Drill Body with Exchangeable Heads, Internal Coolant Holes and One Flat Shank, Drilling Depth 8xD
BT-C#
CAMFIX (ISO 26623-1) Holders with BT MAS-403 AD Tapered Shanks
CATI-C#
CAMFIX (ISO 26623-1) Holders with Caterpillar AD Tapered Shanks
HSK-C#
CAMFIX (ISO 26623-1) Holders with HSK DIN 69893 Form A Tapered Shanks
HOF-R07
Face Mills Carrying Octagonal Round and Fast Feed Segmented Radius Inserts
TPST M-G (HSS)
DIN 13 HSS Straight Flute Machine Taps - ISO Metric Coarse Threads for Grey Cast Iron
MM HCF
Interchangeable 2 flute, solid carbide chamfering head with a MULTI-MASTER adaptation.
HP E90AN-MM-07
90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying HELIPLUS HP ANKT 0702.. Inserts
ISD-E0
Deep Single Tube Drills with External Single Thread Connection and a Brazed Single Tip (.315-.582 dia.)
DGN-WP
Double-Sided Parting and Grooving Inserts with a Wiper Design for High Flatness and Surface Finish
ADKT 1505PD-W
Wiper Insert for High Surface Finish
HM90 F90A-15
90° Face Mills Carrying HM90 ADKT 1505... Inserts
IHCR
Boring Toolholders for MB Modular Boring System
HSK A-ER-SHORT
Short DIN6499 ER Collet Chucks with HSK DIN69893 Form A Tapered Shanks
BT-ER-SHORT
Short ER Collet Chucks with BT MAS-403 AD Tapered Shanks
GSHT
Slitting Inserts for Specially Tailored Heavy Duty Slitting Cutters
GIQR/L-MT
Internal Threading Inserts with a 60° Partial Profile for Threading in .31" and Larger Holes
SDJCR/L
Screw Lock Tools Carrying 55° Diamond Inserts with 7° Clearance Angle
S-CTFPR
Clamp Lock Boring Bars for 11° Clearance Triangular Inserts
MTFNR/L
Comlock Holders for Facing with Negative Triangular Inserts
ISD-E1
Deep Single Tube Drills with External 2 and 4 Start Thread Connections and a Single Brazed Tip (.496-.787 dia.)
ETS-LN08-M
Grooving and Slitting Cutters with FLEXFIT Threaded Adaptation
HP F90AT-19
90° Face Mills Carrying HP AD.. 1906... Long Edged Inserts
ADJ HSK A
FINEFIT Center Alignment Shank and Base with a DIN69893 HSK Tapered Shank for Specially Tailored Toolholders
MM HDF
Interchangeable 2 Flute Solid Carbide Heads for Upper and Bottom Chamfering
HSK A63WH-DDNNN
R-Clamp Turning Tools with HSK Taper Shank Carrying Negative DNMG Inserts
SGSA
Slitting Cutters Carrying GSAN Self-Clamped Inserts
MTECB-NPT
Solid Carbide Threading Endmills with Coolant Hole for an External or Internal NPT Thread Profile
GIQR/L-WT
Internal Inserts with Whitworth Partial Profile for Threading in .31" and Larger Holes
PCLCR/L-S
Side Lever Lock Tools Carrying 80° Positive Rhombic Inserts for Swiss Automatic Machines
HTR-QF
Toroidal Inserts with a Variety of Corner Radii for Machining Fillets and Next to Steep Walls
FF EW-CF
Fast Feed Endmills with CLICKFIT Shanks
MTEC-ISO
Solid Carbide Internal Threading Endmills for ISO Thread Profile
ST-ER
DIN 6499 ER Collet Chucks with Straight Shanks
BT-ODP (FLEXFIT)
FLEXFIT Threaded Adaptation with Integral BT MAS-403 Tapered Shanks (ADB type)
RE-C#
CAMFIX Reduction Adapters
SDJCR/L-13-SL
Screw Lock Tools Carrying 55° Diamond Inserts with 7° Clearance Angle for High Rigidity in Profiling Applications
PCLCR/L-S-JHP
Tools with Channels for High-Pressure Coolant Carrying 80° Positive Rhombic Inserts for Swiss Automatic Machines
H400 ER-M
Endmills with FLEXFIT Threaded Connection Carrying Double-Sided Inserts with Four Radius Cutting Edges
MM EDF
Interchangeable 3 Flute Solid Carbide Heads for Upper and Bottom Chamfering
KITI BHEI MB
Contains a Fine Boring Head and Various Boring Toolholders and Inserts
MTECZ-NPT
Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes, for Internal or External NPT Thread Profile
SDJCR-PAD
Screw Lock Adapter for 55° Diamond Inserts with 7° Clearance Angle
ETS-LN08-MM
Grooving and Slitting Cutters with MULTI-MASTER Threaded Adaptator
SGSF/A-M-JHP
Grooving and Slitting Small Diameter Cutters with FLEXFIT Threaded Adaptation
SGSF/A-MM-JHP
Grooving and Slitting Small Diameter Cutters with the MULTI-MASTER Threaded Adaptor
TGSF-M-JHP
Grooving and Slitting Small Diameter Cutters with FLEXFIT Threaded Adaptation
TGSF-MM-JHP
Grooving and Slitting Cutters with MULTI-MASTER Threaded Adaptor
C#-DT##/2-L23
Toolholder with CAMFIX Adaptation on DT for SCHUTTE Machine Tools
ETS-XN06-MM
T-SLOT Endmills with a MULTI-MASTER Threaded Connection, Mount XNMU 0603 Square Inserts
SDJCR-SL-PAD-JHP
HP Screw Adapter, Coolant, 55° Diamond Inserts, 7° Clearance. Insert Bottom Ridge, Profiling Rigidity.
SDJCR/L-PAD-JHP
Screw Lock Adapter with High-Pressure Coolant Mounts 55° Diamond Inserts with 7° Clearance Angle
MTECBF-UN
Solid Carbide Internal Threading Endmills with a Coolant Hole. Intended for UN Thread Profile.
PICIN-MGSIR/L
Solid Carbide PICCO Tools on which Internal Laydown Threading Inserts are Mounted
Y-SDJCR-S-JHP
Y-Axis Screw Lock JETCUT Integral Tools Carrying 55° Rhombic Inserts with 7° Clearance Angle
NQCH-SDJNR/L-S-JHP
Screw Lock JETCUT Modular Heads Carrying Positive Double-Sided 55° Rhombic Inserts for Swiss-Type Machines
MTECBF-ISO
Solid Carbide Internal Threading Endmills with a Coolant Hole. Intended for ISO Thread Profiles.
DT##/2 MAHD#-#-XL-JHP
Intermediate Holder with DT Adaptation for MODULAR-GRIP Adapters on SCHUTTE Machine Tools
MM GRIT-45A
Interchangeable Solid Carbide Small Diameter 45° Chamfering Heads
INU-R/L
Precision Double-Ended Flat Top Inserts for External Undercutting
HOF-R06
Face Mills Carrying Octagonal or Square or Round Inserts
T490 ELN-08
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, 8 mm Long Cutting Edges
EX C# (CAMFIX extension)
CAMFIX Extension Adapters
MITR 8-MT
Internal ISO Metric Threading Inserts for Partial Profile
HP F90AT-22
90° Face Mills Carrying HP AD.. 2207... Long Edged Inserts
E-SIR-HEAD
Interchangeable Threading Heads, for Carbide Bars
KIT ISO-ER
Contains ER Collet Chuck with an ISO Tapered Shank and a Set of Collets in Various Bore Sizes
KIT R-8 ER
Contains ER Collet Chuck with a Bridgeport Shank and a Set of Collets in Various Bore Sizes
HCR
Ball Nose Inserts with 2 Straight Tangent Cutting Edges (Fully Effective) for Cavity Profiling and Shouldering
DGR/L-C DGRC/LC-C
Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications
ISD-E2/E3
Deep Single Tube Drills with External 2 and 4 Start Thread Connections and 2 or 3 Brazed Tips (.496-2.559 dia.)
GIP-UN
Precision Double-Ended Inserts for External Undercutting
TPF M-F (HSS)
DIN 13 HSS Cold Forming Machine Taps - ISO Metric Coarse Threads
F45NM
45° Face Mills Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges
KIT EFSI-B44
The FINISHRED kit contains 3 solid carbide endmills producing a finished surface quality in high machining parameters.
DCN R-10D
Drill Body with Exchangeable Heads, Internal Coolant Holes and a Cylindrical Shank, Drilling Depth 10xD
DGR/L-C-XL
Extra Long Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications
MM TS-45
Interchangeable Solid Carbide Small Diameter 45° Chamfering Heads
H606 ER-M
Endmills with FLEXFIT Threaded Connection Carrying Double-Sided Inserts with Six Cutting Edges
RDS ER-M
Endmills with FLEXFIT Threaded Connection Carrying Double-Sided Round Inserts with 12 Cutting Edges
S890 ESZ-R08
Endmills Carrying Double-Sided Square Inserts with 8 Cutting Edges
NQCH-PCHR/L-S-JHP
Screw Lock JETCUT Modular Heads Carrying PENTA Inserts for Grooving, Parting, and Recessing on Swiss-Type Machines
DGR/L-J/JS-D
Double-Sided Inserts for Parting Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
QTHR/L-30-JHP-MC
Grooving and Parting Tools Carrying GROOVE 4 CUT Inserts with Inlets for High-Pressure Coolant
QTHR/L-30-JHP
Grooving and Parting Tools Carrying GROOVE 4 CUT Inserts with Inlets for High-Pressure Coolant
PCHR/L-D-JHP
Grooving and Parting Tools with Channels for High-Pressure Coolant Carrying Inserts with 5 Cutting Edges
API THREADING FLDC-E
Double-Ended, Precision, Flat Top Threading Inserts
PCHRS/LS-17-JHP
Tools Carrying Inserts with 5 Cutting Edges for Shallow Profiling Next to High Shoulders
PCHR/L-27-JHP-MC
Tools Carrying Pentagonal Wide Inserts for Specially Tailored Profiles
PCHRS/LS-17
Tools Carrying Inserts with 5 Cutting Edges for Grooving,Parting and Recessing Next to High Shoulders
PCHR/L-D-IQ
Grooving and Parting Tools Carrying Inserts with 5 Cutting Edges
PCHR/L-24-JHP
Grooving, Parting and Recessing Tools Carrying PENTA Inserts with Channels for High-Pressure Coolant
TGFH-JHP
Parting and Grooving Blades with Channels for Low and High-Pressure Coolant Carrying TANG-GRIP Inserts
ISD-EC
Deep Single Tube Drills with External 4-Start Thread Connection and Cartridges (1.496-11.496 dia.)
H400 ER-12
Endmills Carrying Double-Sided Inserts with Four .236" Radius Cutting Edges
FTP-LN10
Fast Feed Shell Mill Carrying Tangentially Clamped Inserts with 4 Cutting Edges
ADKW (CBN)
Single Corner R.H. Inserts with an IB85 PCBN Brazed Tip for Machining Hard Materials
PCHR/L-24
Grooving, Parting and Recessing Holders Carrying Inserts with 5 Cutting Edges
F45WG
45° Face Mills Carrying Octagonal ONHU/MU 0806... Inserts with 16 Cutting Edges
DGR/L-J/JS
Double-Sided Inserts for Parting Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
LNAR 1106
Tangentially Clamped Inserts with Positive Polished Rake
HSK A63WH-MULNR/L-MW
MULTI-WEDGE Toolholders with HSK Taper Shanks for 80° Rhombic, Trigon and Square Inserts
HSK A63WH-MULNR-J12MWX2
MULTI-WEDGE Twin Toolholders with HSK Taper Shanks for 80° Rhombic, Trigon and Square Inserts
GEHSR
External Machining Holders for Swiss-Type and Automatic Machines
PCHRS/LS
Holders Carrying Inserts with 5 Cutting Edges for Grooving,Parting and Recessing Next to High Shoulders
GIMY-UN
Utility Single-Ended Inserts for External Undercutting
CR-D8 /.31
Ball Nose .315" Diameter Profiling Insert
E90A
Endmills Carrying APKT/APKR-10.. Inserts
ADKW (PCD)
Single Corner R.H. PCD Tipped Inserts for Milling Aluminum
E93CN-07
Toroidal Bull Nose Endmills with CNHT...and ENHT... Inserts
H400 ER-10
Endmills Carrying Double-Sided Inserts with Four .197" Radius Cutting Edges
DGR/L-J-XL
Extra Long Double-Sided Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts
GEHSR/L-SL
External Machining Tools with Side Clamping Mechanism for Swiss-Type and Automatic Machines
HM90 ADCT 1505PDR-CF
Inserts with 2 Different Cutting Edge Configurations Designed for Chatter Dampening
DCN R-12D
Drill Body with Exchangeable Heads, Internal Coolant Holes and a Cylindrical Shank, Drilling Depth 12xD
C#-SRGCR-12-JHP
Screw Lock Tools with CAMFIX Exchangeable Shanks Carrying Round Inserts with 7° Clearance Angle
SCB
DIN138 (Tolerance C11) Inserts for Keyway Broaching on Lathe and Milling Machines
XNUWB
DIN138 (Tolerance C11) Inserts for Keyway Broaching on Lathe and Milling Machines
GHDR/L-JHP (long pocket)
CUT-GRIP Tools with Channels for High-Pressure Coolant for Grooving and Turning
GHSR/L-JHP-SL
Grooving and Turning Side Lock Tools with Channels for High-Pressure Coolant on Swiss-Type and Automatic Machines
H400 FR-12
Face Mills Carrying Double-Sided Inserts with Four .236" Radius Cutting Edges
H490 ANKX/ANCX-12
Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
DCNM-M
Modular SUMOCHAM Drill with FLEXFIT Connection for Multi-Spindle and Swiss-Type Machines
TJS HPC C#
High-Pressure Coolant Driven HSM Spindle with CAMFIX Shank for Small Diameter Cutting Tools
MT LNH#-ACME (Internal)
Internal ACME Profile Thread Milling Inserts for Feed Screws
DCNT (M8-M24) (Metric)
Drill Body with Exchangeable Heads, Chamfering Inserts, Internal Coolant and One Flat Shank. Used for Pre-Tread Holes
DCNT (UNC/UNF)
Drill Body with Exchangeable Heads, Chamfering Inserts, Internal Coolant and One Flat Shank. Used for Pre-Tread Holes.
EPNDI
Solid Carbide Endmill with Special Cutting Edges for Drill Mill Operations
C#-SDNCN-13-SL-JHP
Screw Clamp Tools with CAMFIX Shanks and Channels for High-Pressure Coolant Carrying Positive 55° Rhombic Inserts
ISD-IF-FB
Deep Single Tube Drills with Internal Single-Start Thread Connection (.984-3.504 dia.)
ISD-EF-FB
Deep Single Tube Drills with External 4-Start Thread Connection for High Feed (.984-3.504 dia.)
A-PDUNR/L
Lever Lock Boring Bars for 55° Negative Rhombic Inserts
E93CN-M-07
Bull Nose Endmills with FLEXFIT Threaded Adaptation Carrying Toroidal Inserts
HSK E-ODP (FLEXFIT)
FLEXFIT Threaded Adaptation with HSK DIN69893/E Tapered Shanks
C#-SVJNR/L-F
Screw Lock Tools with CAMFIX Exchangeable Shanks Carrying 35° Negative Rhombic Inserts
DCT (3/8-7/8 UNC/UNF)
Drill Body with Exchangeable Heads, Chamfering Inserts, Internal Coolant and One Flat Shank. Used for Pre-Tread Holes.
MTEC-NPT
Solid Carbide Threading Endmills for an External or Internal NPT Thread Profile
GFI MT-ER-I
Floating Reamer DIN 6499 Collet Chucks with Morse Tapered Shanks
PSKNR/L-CA
75° Lead Angle Cartridges Carrying the Negative Square Inserts
PCLNR/L-CA
95° Lead Angle Exchangeable Cartridges Carrying the Negative 80° Diamond Inserts
ST-ER-MF (mini flat)
DIN 6499 ER Mini Collet Chucks with Cylindrical Shanks and a Clamping Flat for Swiss-Type CNC Lathes
GTI CAT-ER (tapping)
DIN 6499 ER Tapping Attachments with Caterpillar Tapered Shanks
SDN-LN12
Full Slot Disk Type Slotting Cutters Carrying LNET 12 Tangentially Mounted Inserts
CAT-ER-SHORT
DIN 6499 ER Short Collet Chucks with Caterpillar Form AD Tapered Shanks
HSK A-CF (CLICKFIT)
Modular Connections (CLICKFIT) with HSK DIN69893/A Tapered Shanks
PH
High Productivity Center Cutting Plungers with PLHT 1305-PDX Inserts
MG-SWUCR
Solid Carbide Boring Bars Carrying WCGT Trigon Inserts for Small Diameters
HSK E-SRK
Thermal Chuck Collets with HSK DIN69893 Form E Tapered Shanks for Solid Carbide Tools Only
HSK A63WH-DDJNR/L
R-Clamp Turning Tools with HSK Taper Shank Carrying Negative DNMG Inserts for Mounting on a 15° Turn-Mill Machines
C#-SDNCN
Screw Lock Tools with CAMFIX Exchangeable Shanks Carrying 55° Rhombic Inserts with 7° Clearance Angle
C#-SRGCR/L
Screw Lock Tools with CAMFIX Exchangeable Shanks Carrying Round Inserts with 7° Clearance Angle
C#-SVVCN
Screw Lock Tools with CAMFIX Exchangeable Shanks Carrying 35° Rhombic Inserts with 7° Clearance Angle
DGR-P
Double-Sided Inserts for Parting Soft Materials, Thin and Miniature Parts
E93CN-MM-07
Bull Nose Endmills with MULTI-MASTER Threaded Adaptation Carrying Toroidal Inserts
GSAN
SELF-GRIP Slitting Inserts
KIT BHFH-MB
Contains Adapters, Extensions and Boring Bars for 1.42 to 16.14" Boring Range
A/S-MWLNR/L-W
Top Wedge Lock Boring Bars Carrying Double-Sided Trigon Inserts
A-MDUNR/L
Clamp Lock Boring Bars with Coolant Holes for Negative 55° Inserts
MTENN-W
Neutral Wedge Lock Turning Tools Carrying Negative Triangular Inserts
MTJNR/L-W
93° Lead Angle Wedge Lock Turning Tools Carrying Negative Triangular Inserts
MSDNN
Comlock 45° Lead Angle Holders for Negative Square Inserts
MTGNR
Comlock 90° Lead Angle Holders for Negative Triangular Inserts
S-PQLNR
Lever Lock Boring Bars for Negative Square Inserts with 80° Corners
STFCR/L
Screw Lock Tools Carrying Triangular Inserts with 7° Clearance Angle for Face Turning
HGAIR/L-3
Adapters for Internal Face Grooving and Turning
ER-SPR-AA
DIN 6499 'AA' Ultra Precise ER Spring Collets with Super Finish Surface and Special Anti-Corrosion Protection
NQCH-GHSR/L-JHP
Screw Lock JETCUT Modular Heads Carrying CUTGRIP Inserts for Grooving and Turning on Swiss-Type Machines
DT30/2 ADR-##-20-55
Intermediate Holder with DT30 Adaptation for Boring Bars on SCHUTTE Machine Tools
HFAIR/L-DG
Adapters for Internal Face Grooving and Turning
GHIUR/L
Undercutting and Turning Boring Bars
DGAD/HGAD
Parting and Grooving Adapters for DO-GRIP Double-Ended Inserts
DGAMM
Replacment DO-GRIP Adapter for Other Manufacturers' Holders. Parting and Grooving, with Double-Ended Inserts
DGR-WP
Double-Sided Parting Inserts with a Wiper Design for High Flatness and Surface Finish
DGAM
Parting and Grooving Replacement Adapter for DO-GRIP Double-Ended Inserts, for Other Manufacturers' Holders
DGAMR/L
Parting and Grooving Replacement Adapter for DO-GRIP Double-Ended Inserts, for Other Manufacturers' Holders
HGPAD
Adapters for Turning, Grooving and Parting
PH-A
High Productivity Center Cutting Plungers with Spiral Flutes Carrying PLHT 1305-PDX Inserts
GEHIR/L
Internal Machining Bars with Coolant Holes
DGAD-B-D
Parting and Grooving Screw-Clamped Adapters for DO-GRIP Double-Ended Inserts
FLRR/L
External Tools for 45° Undercutting
TANMM
Replacement Parting and Grooving Adapters for TANG-GRIP Tangentially Clamped Inserts
H400 FR-10
Face Mills Carrying Double-Sided Inserts with Four .197" Radius Cutting Edges
H400 FR-16
Face Mills Carrying Double-Sided Inserts with Four .315" Radius Cutting Edges
VDI#### V##-JHP
Toolholders for Star Turrets with VDI Adaptation and Internal Coolant Supply for MODULAR-GRIP-XL Adapters
VDI##-P V60-JHP
Toolholders for Disc-Type Turrets with VDI Adaptation and Internal Coolant Supply for MODULAR-GRIP-XL Adapters
DGR-Z/ZS
Double-Sided Inserts with Very Positive Rake for Parting Tubes, Thin-Walled and Small Parts
C#-MVJNL
93° Lead Angle Tools with CAMFIX Exchangeable Shanks, for 35° Negative Inserts
DT30/2 ASH# 16/20-1-35080
Intermediate Holder with DT30 Adaptation for Square Shank Tools on SCHUTTE Machine Tools
DT30/2 ##L70WN
Intermediate Holder with DT30 Adaptation for Boring Bars on SCHUTTE Machine Tools
RDS FR-12
Face Mills Carrying Double-Sided Round Inserts with 12 Cutting Edges
HSK A63WH-MUMNN-MW
MULTI-WEDGE Tools with HSK Exchangeable Shanks Carrying 80° Negative Rhombic or Trigon or Square Inserts
H606 ER
Endmills Carrying Double-Sided Inserts with six .250" Radius Cutting Edges
H606 FR-12
Face Mills Carrying Double-Sided Round Inserts with Six Cutting Edges
SOF45-26
Heavy Duty 45° Face Mills Carrying Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges
H606 FR-.50
Face Mills Carrying Double-Sided Inserts with Six .250" Radius Cutting Edges
CNGA-2 (CBN)
80° Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys
T290 ELN-MM-05
Endmills with a MULTI-MASTER Adaptation Carrying Tangentially Clamped Inserts
CNGA-4 (CBN)
4-Cornered CBN Inserts for Machining Hardened Steel
A-PCLNR/L-X/G
Lever Lock Boring Bars for CNMX Inserts
C#-SVJCR/L-JHP
Screw Lock Tools with CAMFIX Exchangeable Shanks Carrying 35° Rhombic Inserts with 7° Clearance Angle
A-PCLXR/L
Lever Lock Boring Bars Carrying CXMG 80° Rhombic Inserts
C#-SVJCR/L
Screw Lock Tools with CAMFIX Exchangeable Shanks Carrying 35° Rhombic Inserts with 7° Clearance Angle
HM90 EAL-M-15-JHP
90° Endmills with a FLEXFIT Threaded Adaptation Carrying HM90 AXCR 1505... Inserts for Machining Aluminum
DCN-MM
Modular Drill Body with Exchangeable Heads, Internal Coolant Holes and MULTI-MASTER Connection, Drilling Depth 2xD
HM90 EAL-M-16-JHP
90° Endmills with a FLEXFIT Threaded Adaptation Carrying HM90 APCR 1605... Inserts for Machining Aluminum
HM90 EAL-MM-15-JHP
90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying HM90 AXCR 1505... Inserts for Machining Aluminum
HM90 EAL-MM-16-JHP
90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying HM90 APCR 1605... Inserts for Machining Aluminum
A/E-SCLXR-2X
crew Lock Boring Bars on which CXMU 80° Rhombic Inserts are Mounted
DCN-PICCO
Drill Body with Exchangeable Heads, Internal Coolant Holes and PICCO Connection, Drilling Depth 3xD
ER-AAA
DIN 6499 'AAA' Ultra Precise ER Spring Collets with Super Finish Surface and Special Anti-Corrosion Protection
HSK A-SRK-CX
Thermal Shrink Chucks with HSK DIN69893 Form A Tapered Shank and Jet Coolant Grooves for Solid Carbide Tools Only
C#-SVVNN-F
72.5° Lead Angle Tools, for 35° Negative Inserts with CAMFIX Exchangeable Shanks
GM-DG
Slitting Cutters Carrying Self-Clamped Inserts
IM-MAHD
Holders with an ISO 26622-1(*) Tapered Shank for Parting, Grooving, Turning and Facing Adapters
MTECB-NPTF
Solid Carbide Threading Endmills with Coolant Holes, for External or Internal NPTF Thread Profile
HP E90AT-19
90° Endmills Carrying HP AD.. 1906.. Inserts
H490 ANKX/ANCX-17
Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
HSK A-ODP (FLEXFIT)
FLEXFIT Threaded Adaptation with HSK DIN 69893/A Tapered Shanks
HSK E-ER
DIN6499 ER Collet Chucks with HSK DIN69893 Form E Tapered Shanks
BT-MAXIN
Power Chucks with BT MAS-403 ADB Tapered Shanks
TGDR/L
External Holders for Turning, Grooving and Profiling
CNGA (CER)
Negative 80° Rhombic Double-Sided Inserts for Machining Cast Iron, Hardened Steel, and Heat-Resistant Alloys
PHGR/L
Holders for External Grooving and Turning
CSDNN-CE
45° Lead Angle Toolholders Using Square Ceramic Inserts
GHIFR-A
8° / 10° Approach Angle Bars for Facing and Internal Machining
IM-TBU
Blocks with an ISO 26622-1(*) Tapered Shank for Parting and Grooving Blades
MS-ES#####-GWS-MG-JHP
Toolholders for Goltenbodt GWS Systems with Internal Coolant Supply for MODULAR-GRIP Adapters
T290 ELN-05
Endmills Carrying Tangentially Clamped Inserts
H490 F90AX-12
90° Face Mills Carrying Double-Sided Inserts with 4 Helical Cutting Edges
MTECB-NPSF
Solid Carbide Threading Endmills with Coolant Holes for an External or Internal NPSF Thread Profile
MTECZ-NPTF
Solid Carbide Threading Endmills with Coolant Holes for Internal or External NPTF Thread Profile
ISC-EC
Deep Single Tube Counterbore with Through Hole, External 4 Start Thread Connection and a Cartridge (1.575-11.496 dia.)
C#-ODP (FLEXFIT)
FLEXFIT Threaded Connection Shanks with CAMFIX (ISO 26623-1) Adaptation
H490 ANKX/ANCX-09
Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
CF5 A-SVXCR-22
Boring Heads for VCGT 2205 Inserts and a CLICKFIT CF5 Adaptation, for Machining Aluminum Wheels
ISC-EA
Deep Single Tube Counterbore with Through Hole, External 4 Start Thread and Adjustable Diameter (.984-1.574 dia.)
H490 E90AX-12
90° Endmills Carrying H490 ANKX 12...Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
CNGA-J(CBN)
4-Cornered CBN Inserts for Machining Hardened Steel
GIPI-UR/UL
Precision Double-Ended Inserts for Internal Undercutting
CGHN-D
Double-Ended Blades for External Grooving and Turning
GEHIR/L-SC
Internal Machining Solid Carbide Bars with Coolant Holes
ADJ ST
FINEFIT Center Alignment Shank and Base with Cylindrical Shanks with a Clamping Flat
KIT ST-ER
Contains ER Collet Chuck with a Cylindrical Shank and a Set of Collets in Various Bore Sizes
HSK FM-ER
DIN6499 ER Collet Chucks with HSK DIN69893 FM Tapered Shanks with Two Pins for MAKINO Machine Models MAG Series A
FTB
Blank Inserts for Wide Profile Grooving
C#-MULNR/L-MW
MULTI-WEDGE Tools with CAMFIX Exchangeable Shanks Carrying 80° Negative Rhombic or Trigon or Square Inserts
ER-BUT
External BUT - Oil Thread Profile Laydown Threading Inserts for Buttress Casing
CGHN-DG
Double-Ended Blades for External Grooving and Turning Self-Clamped Inserts
CNGG-F3N
Double-Sided Sharp Edged Positive and Polished Rake Inserts for Finishing Aluminum and Other Non-Ferrous Materials
T465 FLN-22ST
65° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical Cutting Edges
P290 EPW
Long Reach Endmills Carrying .472 and .708" Long Edged Inserts
C#-ER
DIN 6499 ER Collet Chucks with CAMFIX (ISO 26623-1) Exchangeable Tapered Shanks
H490 F90AX-09
90° Face Mills Carrying H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
T490 ELN-M-08
90° Endmills with a FLEXFIT Threaded Adaptation Carrying Tangentially Clamped Inserts
CNGG-J(CBN)
80° Rhombic Inserts with 4 Chipbreaking CBN Tips for Machining Hardened Steel
GDK
Inserts for Rough Grooving V-Shaped Piston Grooves
ER-EL
External EL - Extreme Line Oil Thread Profile Laydown Threading Inserts
CGHN-S
Single-Ended Blades for External Machining
PHSR/L
External Machining Holders for Swiss-Type and Automatic Machines
ST-SRK
Thermal Chucking Collets with Cylindrical Shanks
FFX4 FD-08
Face Mills Carrying "Bone Shaped" Inserts with 4 Cutting Edges for Fast Feed Milling
SBTH-ER
DIN6499 ER Collet Chuck Holders for Height adjustable Modular Back-End Machining System for Swiss-Type Machines
SBTH-PICCO
Height-Adjustable Modular Back-End Machining System for Swiss -Type Machines with Round Shank Holders
T490 ELN-MM-08
90° Endmills with a MULTI-MASTER Threaded Adaptation Carrying Tangentially Clamped Inserts
E90SP
Endmills Carrying Square S/XPMT Inserts
CR/CRF-D.50-1.00
.5-1.0" ball nose precision profiling inserts. Two effective flutes, used for shallow finishing.
ER-MJ
External MJ ISO 5855 Metric Full Profile Laydown Threading Inserts for the Aviation and Aerospace Industries
C#-ER-M
DIN 6499 ER Long Mini Collet Chucks with CAMFIX (ISO 26623-1 standard) Exchangeable Tapered Shanks
H490 E90AX-09
90° Endmills Carrying H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
CNGG-M4HF/M4HM (CBN)
80° Rhombic Inserts with 4 Chipbreaking CBN Tips for Machining Hardened Steel
P290 EPW-M
Endmills with FLEXFIT Threaded Adaptation, Carrying .472 and .708" Long Edged Inserts
PCADR/L-JHP
Adapters with High-Pressure Coolant Holes for PENTACUT Grooving Inserts
MTECD-UN
Small Diameter, Short, Left Hand, Internal UN Profile Endmills for Drilling, Threading and Chamfering
XNUWB (light fit)
DIN6885 Inserts for Light Fit (JS9) Keyway Broaching on Lathe and Milling Machines
SCB (light fit)
DIN6885 Inserts for Light Fit (JS9) Keyway Broaching on Lathe and Milling Machines
C#-MAXIN
MAXIN Power Chucks with CAMFIX (ISO 26623-1 standard) Exchangeable, Tapered Shanks
SOE45 8/16
Multifunctional Endmills for Octagonal, Square and Round Insert Contours with Several Entry Angles
ADJ ER NOSE
Radial and Angular Adjustable Collet Chuck Flanges
MTECS-UNJ
Small Diameter Short Solid Carbide UNJ-Type Profile Threading Endmills
PSSNR/L
45° Lead Angle Lever Lock Tools Carrying Negative Square Inserts for Longitudinal and Facing Applications
MTECZ-UN
Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes for Internal UN Thread Profiles
CAT-FC-MAXIN
Power Chucks with Caterpillar Face Contact AD Tapered Shanks
PSSNR/L-JHP
Lever Lock 45° Longitudinal and Facing Tools for Negative Square Inserts with Channels for High-Pressure Coolant
PCADRS/LS-JHP
Adapters with High-Pressure Coolant Holes for PENTACUT 17
TJS HPC HSK
High-Pressure Coolant Driven HSM Spindle with HSK Shank for Small Diameter Cutting Tools
TJS-GJET-HSK A63
Coolant Driven High Speed Compact Spindles with HSK Shanks
ISO-MB
MB Modular Connection System with ISO 297 Taper Shanks
HSK A-MB
MB Modular Connection System with DIN 69893 HSK A Taper Shanks
BT-CF (CLICKFIT)
Modular System Connections with BT MAS-403 AD Tapered Shanks
GTI BT-ER (tapping)
DIN 6499 ER Tapping Attachments with BT MAS-403 A Tapered Shanks
S M
Shanks for Tools with FLEXFIT Threaded Connection
SSDCN
Screw Lock Neutral Holders for 7° Clearance Square Inserts
MTENN
Neutral Comlock Toolholders for Negative Triangular Inserts
MTJNR/L
93° Lead Angle, Comlock Turning Tools for Negative Triangular Inserts
A-MCLNR/L
Comlock Boring Bars for Negative 80° Diamond Inserts
BBS
Screw Lock Boring Bars for 11° Clearance Triangular Inserts
CNG (CER)
Negative 80° Rhombic Double-Sided Ceramic Inserts for Machining Cast Iron, Hardened Steel and Heat-Resistant Alloys
ERW
Rough Profiling Endmills with Serrated or Regular Round Inserts
MTECSH-UN
Small Diameter Short Left-Hand Solid Carbide UN Profile Threading Endmills for Hardened Steel
H490 F90AX-17
90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
S-DWLNR/L
R-Clamp Boring Bars Carrying Negative Trigon Inserts
C#-SRDCN
Neutral Tools for Round Inserts with 7° Clearance Angle andCAMFIX Exchangeable Shanks
HCE-MM
Multifunction Endmills with a MULTI-MASTER Threaded Adaptation that Mounts Several Insert Geometries
HSK E-MB
MB Modular Connection System with DIN 69893 E Taper Shanks
HP ANKW 070204PNTR
Insert with a .276" Helical Edge and Flat Rake for Rough Machining and Hardened Steel
HP ANKT/ANCT 0702 PN-R/PNTR
Inserts with a .276" Helical Edge and Various Corner Radii for General Use
DSSNR/L
45° Lead Angle R-Clamp Tools Carrying Negative Square Inserts for Longitudinal and Facing Applications
MTECB-UN
Solid Carbide Threading Endmills with Coolant Holes for Internal UN Thread Profile
MTECS-UN
Small Diameter Solid Carbide UN Profile Threading Endmills for Steel
IM-MAHPD
Perpendicular Holders with an ISO 26622-1(*) Tapered Shank for Parting, Grooving, Turning and Facing Adapters
HCE
Multifunction Endmills that Can Carry Several Insert Geometries
HP ANCR 0702PNFR
Peripherally Ground Inserts with a Super Positive Chipformer for Machining Aluminum, Titanium and Magnesium
C#-DDJNR/L
Tools with CAMFIX Exchangeable Tapered Shanks Carrying Negative 55° Rhombic Inserts
PTFNR-CA
91° Lead Angle Lever Lock Face Turning Cartridges Carrying the Negative Triangular Inserts
PSSNR-CA
45° Lead Angle Cartridges Carrying the Negative Square Inserts for Face and Longitudinal Turning
MTEC-NPTF
Solid Carbide Threading Endmills for an External or Internal NPTF Thread Profile
FDN-LN12
Full Slot Cutters Carrying LNET 12... Tangentially Mounted Inserts
TIP-MT
Precision Ground Double-Ended Threading Inserts with a 60° Partial Profile and Chipformer
ST-ER-MF-D (double-ended)
Double-Ended Mini Collets with Cylindrical Shanks and a Clamping Flat
ER-ODP
FLEXFIT Threaded Adaptation with Integral ER Collet for ER Collet Chucks
RING DCM
Chamfering Ring Mounted on CHAMDRILL Drills for Drilling and Chamfering in One Operation
CNGG (CER)
Negative 80° Rhombic Ground Ceramic Inserts with a Chipbreaker for Machining Hardened Steel and Cast Iron
SCD-IXC16
Solid Carbide Drills with Internal Coolant Channels, Drilling Depth 16xD, for Machining ISO K Materials
CNGX-DIMPLE (CER)
Negative 80° Rhombic Ground Ceramic Dimple Inserts for Cast Iron Roughing
NQCH-DGTR/L-D-SH-JHP
Screw Lock JETCUT Modular Heads Carrying DO-GRIP Double-Edged Parting Inserts for Swiss-Type Machines
DGTR/L-B-D-SH (NARROW CUT)
Parting and Grooving Short Head Tools for CNC and Swiss Automatics
NQCH-DGTR/L-D22-SH-JHP
Screw Lock JETCUT Modular Heads Carrying DO-GRIP Double-Edged Parting Inserts for Swiss-Type Machines
DGTR/L-B-T-SH
Reinforced Parting and Grooving Short Head Tools Carrying DGN Double-Ended Inserts
MM HCD
Interchangeable 2 Flute Solid Carbide Heads for Chamfering, Countersinking and Spot Drilling
CAT-MAXIN
Power Chucks with Caterpillar Form AD/B Tapered Shanks
CNGX (CER)
Negative 80° Rhombic Ground Ceramic Inserts for Cast Iron Roughing
LNHT 1506PN-N-HT-S
Tangentially Clamped Insert with 2 Straight Cutting Edges for Deep Slotting
DGTR/L-BC-T
Parting and Grooving Tools with Coolant Holes Carrying JET-CUT Inserts
DGTR/L
Integral Shank Parting and Grooving Tools
DGTR/L-B/BC-D
Integral Shank Reinforced Parting and Grooving Tools Especially for DGNC Type of Inserts
HFIR/L-MC
Boring Bars for Internal Grooving and Turning
ER-PG
External Threading Inserts for the Electric Industry
DGTR/L-B-D-SH
Parting and Grooving Short Head Tools for CNC and Swiss Automatics
DGTR/L-B-D-TR
Reinforced Parting and Grooving Tools Carrying Double-Ended DO-GRIP Inserts
BGTR/L-B-JHP
Integral Shank Parting and Grooving Tools with Coolant Channels Carrying Narrow Inserts for Parting up to .787" Bars
DGTR/L-B-D-JHP-SL
Parting and Grooving Side Lock Type Tools with High-Pressure Coolant for CNC and Swiss Automatics
DGTR/L-XL
Integral Shank Reinforced Parting and Grooving Tools for Parting Up to 2.56" Diameters
C#-PDJNR/L-JHP
Lever Lock Tools with CAMFIX Exchangeable Shanks and Channels for High-Pressure Coolant Carrying Negative 55° Insert
T490 ELN-13
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, .490" Long Cutting Edges
CAT-SEM-C
ISO 3937 Shell Mill Holders with Coolant Holes and Caterpillar ADB Tapered Shanks
IQ845 ESY-R05
50° Endmills Carrying Square Inserts with 8 Cutting Edges
H-FLER
Grooving and Threading Interchangeable Heads (H-Type)
HS-FLER
Grooving and Threading Interchangeable Heads (HS-Type)
A-FLER/L
Internal Grooving and Threading Bars with Coolant Channels
CNGX-M3N
Double-Sided Positive Rake Inserts with High Helical and Sharp Edge for Medium Machining Non-Ferrous Materials
CAT-SEM
ISO 3937 Shell Mill Holders with Caterpillar form ADB Tapered Shanks
MM ECDF
MULTI-MASTER Exchangeable Solid Carbide Flat Bottom Drill Heads
CAT-FM
ISO Face Mill Adapters with Caterpillar Shanks
HSTBS-PEN
Adapters for Brown & Sharpe Automatic Machines, with PENTA Inserts for Parting and Grooving
HMSDV PEN
Adapter Holders for Davenport Machines using PENTA 24... Inserts
MM HC
Interchangeable Solid Carbide Slot Drill Milling Heads with Two 10° Helix Flutes
CNMA
Double-Sided 80° Rhombic Inserts for Short Chipping Materials such as Cast Iron
T490 ELN-CF-13
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, .490" Long Cutting Edges with a CLICKFIT Adaptation
T490 FLN-13
90° Face Mills Using Tangentially Clamped Inserts with 4 Long Helical Cutting Edges
CNMA (PCD)
80° Rhombic Inserts with a Single PCD Top Corner Tip and Positive Rake for Finishing Applications
HOE-R06
Endmills Carrying Octagonal, Square and Round Inserts
C#-SDJCR-JHP
Screw Clamp Tools with CAMFIX Shanks and Channels for High-Pressure Coolant Carrying Positive 55° Rhombic Inserts
C#-SDJCR/L-13-SL-JHP
Screw Clamp Tools with CAMFIX Shanks and Channels for High-Pressure Coolant Carrying Positive 55° Rhombic Inserts
ER/L-ABUT
External American Buttress Laydown Threading Inserts for High Force Transmission in One Direction
GDMW 2.4
Utility Double-Ended Inserts for External Turning, Grooving and Parting
FRW
Rough Profiling Face Mills with Serrated or Regular Round Inserts
F92ST
92° Side Plunge Milling Cutters, used with SEKT 43 AFR.. Inserts
C#-SDJCR/L
Screw Lock Tools with CAMFIX Exchangeable Shanks Carrying 55° Rhombic Inserts with 7° Clearance Angle
C#-MCLNR/L
95° Lead Angle Toolhols, for Negative 80° Inserts with CAMFIX Exchangeable Shanks
HCC-QF
Inserts with 2 Cutting Edges (Fully Effective) for Shouldering, Slotting, Drilling and Countersinking
ERW-M
Rough Profiling Tools with a FLEXFIT Adaptation
MTSRH (endmills)
Endmills with Coolant Holes for Helical Threading Inserts
MTSRH (helical shell mill)
Shell Mills with Coolant Holes for Helical Threading Inserts
PCADR/L
Adapters for PENTACUT Grooving Inserts
MTEC-UN
Solid Carbide Threading Endmills for Internal UN Thread Profile
ST-ER-S
DIN 6499 ER Collet Chucks with Coolant Holes and Cylindrical Shanks
FF FW
Fast Feed Face Mills
IM-GHAD-8
Holders with an ISO 26622-1(*) Tapered Shank for Grooving, Turning and Facing Adapters
CAT-FC-EM
DIN1835 Form B Endmills with Caterpillar Face Contact AD Tapered Shanks
MTE-MM
Indexable Threading Endmills with a MULTI-MASTER Shank Connection
MD-BODY
Modular Drill Bodies, Each Can Carry a Variety of Exchangeable Drilling Heads with Different Diameters
CNMA-MW4 (CBN)
80° Rhombic Inserts with 4 CBN Wiper Edge Tips for Machining Hardened Steel
ISD-IC
Deep Single Tube Drills with Internal Single-Start Thread Connection and Cartridges (1.496-11.574 dia.)
FF SOF
Multifunction Fast Feed Milling Cutter for Octagonal and Square Insert Shapes with Various Entry Angles
FFX4 ED-MM
Endmills with MULTI-MASTER Adaptation that Mount Small "Bone Shaped" Inserts with 4 Cutting Edges for Fast Feed Milling
FFX4 ED-M
Endmills with FLEXFIT Adaptation Carrying Small "Bone Shaped" Inserts with 4 Cutting Edges for Fast Feed Milling
FFX4 FD-04
Face Mills Carrying "Bone Shaped" Inserts with 4 Cutting Edges for Fast Feed Milling
MTF D (Shell Mill)
Thread Milling Multi-Insert Shell Mills
MTFLE
External Multi-Tooth Threading Shell Mills
CNMA-T/M1/WG (CBN)
80° Rhombic Inserts with a Single CBN Top Corner Tip for Machining Cast Iron, Hardened Steel and Super Alloys
ER/L-API
External API - Oil Thread Profile Laydown Threading Inserts
CAT-EM
Weldon Endmill Holders with Caterpillar Form ADB Tapered Shanks
FF EW-M
Fast Feed Endmills with FLEXFIT Threaded Adaptation
KIT ST-ER-M/MF
Contains ER Mini Collet Chuck with a Cylindrical Shank and a Set of Collets in Various Bore Sizes
MD-EXTENSION
Modular Extension Holder to Prolong The Overall Length by 7.874"
MD-BODY-3D
Modular Drill Bodies, Each Can Carry a Variety of Exchangeable Drilling Heads with Different Diameters
MD-BODY-5D
Modular Drill Bodies, Each Can Carry a Variety of Exchangeable Drilling Heads with Different Diameters
MD-BODY-8D
Modular Drill Bodies, Each Can Carry a Variety of Exchangeable Drilling Heads with Different Diameters
C#-SCLCL
Screw Lock Tools with CAMFIX Exchangeable Shanks, for 80° Rhombic Inserts with 7° Clearance Angle
MM EA
Interchangeable Solid Carbide Slot Drill Milling Heads for Machining Aluminum
ER/L-API RD
External API - Oil Thread Round Profile Laydown Threading Inserts
DFN A-1.5D-IQ
Drill Body with Exchangeable Heads, Internal Coolant Holes and Flat Shank. Drilling Depth: 1.5xD
DFN A-8D-IQ
Drill Body with Exchangeable Heads, Internal Coolant Holes and Flat Shank. Drilling Depth: 8xD
MD-DFN-HEAD
Exchangeable Drilling Heads Carry CHAM-IQ-DRILL Solid Carbide Inserts
C#-SCLCR/L-JHP
Screw Clamp Tools with CAMFIX Shanks and Channels for High-Pressure Coolant Carrying Positive 80° Rhombic Inserts
MD-MNC-HEAD
Exchangeable Modular Drilling Heads with a Pilot SUMOCHAM Head and Peripheral Triangular Inserts
MD-DR-DH-HEAD
Exchangeable Drilling Heads with Guide Pads Carry Square Inserts
MM EA-CF
Interchangeable Solid Carbide Endmill Heads with Different Helix for Machining Aluminum
DFN A-5D-IQ
Drill Body with Exchangeable Heads, Internal Coolant Holes and Flat Shank. Drilling Depth: 5xD
DFN A-3D-IQ
Drill Body with Exchangeable Heads, Internal Coolant Holes and Flat Shank. Drilling Depth: 3xD
CNMG (CER)
80° Rhombic Double-Sided Inserts with a T-Land for Machining Cast Iron and Hardened Steel
C#-PCLNR/L-X-JHP
Lever Lock Tools with CAMFIX Shanks and Channels for High-Pressure Coolant Carrying CNMX or CNMG Inserts
C#-PCLNR/L-12-JHP
Lever Lock Tools with Channels for High-Pressure Coolant and CAMFIX Shanks Carrying 80° Negative Rhombic Inserts
F45ST
45° Screw Clamped Face Mills Carrying SEK/MT 12... Inserts
C#-PCLNR/L-X
Lever Lock Tools with CAMFIX Exchangeable Shanks Carrying CNMX and CNMG Rhombic Inserts
GDP
Inserts for Precision Grooving V-Shaped Piston Grooves
CNMG-CERMET
Double-Sided 80° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications
ER/L-BSPT
External BSPT (British Standard Pipe) B.S.21-1957 Full Profile Laydown Threading Inserts
FF EW
Fast Feed Endmills with FF WO.. Inserts
BLP Endmills
Three Flute 240° Ball Nose Endmills Carrying Double-Sided Inserts
GDPY
Precision Double-Ended Inserts for External Heavy-Duty Grooving and Turning
CNMG-F3M
Double-sided 80° Rhombic Inserts for Stainless Steel Finishing Applications
CNMG-F3P
Double-Sided 80° Rhombic Inserts for Semi-Finishing and Finishing Applications
SCB (tight fit)
DIN6885 Inserts for Tight Fit (P9) Keyway Broaching on Lathe and Milling Machines
XNUWB (tight fit)
DIN6885 Inserts for Tight Fit (P9) Keyway Broaching on Lathe and Milling Machines
ISC-IA
Deep Single Tube Counterbore with a Through Hole, Internal Single-Start Thread and Adjustable Diameter (.984-1.574 dia.)
MTE D
Indexable Threading Endmills
SW/S-JHP
Drive Shanks with Coolant Channels for SELF-GRIP Slitting Cutters
HSK A-SEM-C
Shell Mill Holders with Coolant Holes and DIN69893 form A HSK Tapered Shanks
PICCO R/L 002-007-N (Grooving and Turning)
Inserts with Inner Coolant Channel for Internal Grooving and Turning
ER/L-NPT
External NPT (National Pipe Threads) Full Profile Laydown Threading Inserts for Steam, Gas and Water Pipes
MSSNR
Comlock Holders for Negative Square Inserts, 45° Face and Longitudinal Lead Angles
CTGPR
Clamp Lock Toolholders for 11° Clearance Triangular Inserts
GIPI-RX/LX
Precision Double-Ended Inserts for Internal Grooving Next to a Shoulder
PICCO R/L 002-007
Inserts for Internal Grooving and Turning
CAT-CF (CLICKFIT)
Caterpillar AD Tapered Shanks for CLICK-FIT Adapters
CAB M-M (FLEXFIT)
Reducers and Extensions with Coolant Holes for the Modular FLEXFIT System
MG STFPR-X
Solid Carbide Boring Bar Carrying TPGX Inserts for Small Diameters
GEMI
Utility Double-Ended Inserts for Internal, External Grooving and Turning
XOGX-DT
Inserts Used on Chamfering Rings
E-SCLCR/L-HEAD
Screw Clamped Boring Heads Carrying 80° Rhombic Inserts with Positive 7° Clearance Mounted on Carbide Bars
CDP M-SRK
Thermal Shrink Chucks with FLEXFIT Adaptation for Clamping Solid Carbide Endmills
SW/S
Drive Shanks for SELF-GRIP Slitting Cutters
MDR MMT-JHP
Multi-Function Modular Head for Endmill Cutters with a MULTI-MASTER Threaded Adaptation
TGFHR/L
Single- and Double-Ended Parting and Grooving Reinforced Blades Carrying TANG-GRIP Tangentially Clamped Inserts
TGFS
Blades for Multi-Spindle Machines - Replacement for HSS and Brazed Tools
GHIR/L (W=.260-.315)
Grooving and Turning Boring Bars
TGFH/R/L
Blades with a Tangentially Oriented Pocket Carrying TANG-GRIP Single-Ended Inserts for Parting and Grooving
TIP-WT
Precision Ground Double-Ended Threading Inserts with a 55° Partial Profile and a Chipformer
CR HFIR-M
Cartridges for Face Grooving and Turning
FDN
Full Slot Flange-Type Slotting Cutters
HFHR/L-4T
Integral Toolholders for External Facing
ER/L-RND
External DIN 405 Round Laydown Threading Inserts for Fire Fighting and Food Industry Pipe Couplings
CNMG-F3S
Double-Sided 80° Rhombic Inserts for Titanium and Heat Resistant Materials for Finishing Applications
ISC-IC
Deep Single Tube Counterbore with a Through Hole, Internal Single Start Thread and a Cartridge (1.575-11.574 dia.)
TGFH-MB
Parting and Grooving Blades for Other Manufacturers Blocks
TGSU
Parting and Grooving Flat Top Blades with Tangential Pockets Carrying TANG-GRIP Single-Ended Inserts
CAB M-SEM
FLEXFIT Shell Mill Holder Adaptation with Coolant Holes
TGFHL-TR
Reinforced Blades for TRAUB and Index Machines Carrying TANG-GRIP Tangentially Clamped Inserts
TGFH-S
Parting and Grooving Single-Sided Blades Carrying TANG-GRIP Inserts
HSK A-HYDRO
Hydraulic Chucks with HSK DIN69893 Form A Tapered Shanks
CNMG-GN
Double-Sided 80° Rhombic Inserts for General Applications
ER/L-SAGE
External Buttress Thread (DIN 513) for High Force in One Direction Applications
MM ECU
Interchangeable 3 Flute Undersized Solid Carbide Heads for Keyways (DIN 6885)
AOMT-Chamfering
Chamfering Inserts
GEPI
Precision Ground Double Ended Inserts for Internal and External Grooving
HSK E-SEM
ISO 3937 Shell Mill Holders with HSK E DIN69893 Form E Tapered Shanks
HSK FM-SEM
Shell Mill Adapters with HSK DIN69893 FM Tapered Shanks with Two Pins for MAKINO Machine Models MAG
XCGT-DT
Inserts used on Chamfering Drill Holders for Chamfering and Drilling in One Operation
FDN-CF4
Full Slot Flange-Type Slotting Cutters with CLICKFIT Adaptation
ER/L-STACME
External STUB ACME Laydown Threading Inserts with a Shallow ACME Profile for Control Valves
ETS
T-Slot Endmills
MM ECS
Interchangeable Solid Carbide Centering Drills (ANSI B94.11M / DIN 332)
GEPI (full radius)
Precision Double-Ended Full Radius Inserts for Internal and External Profiling and Grooving
CNMG-M3M
Double-Sided 80° Rhombic Inserts for Machining Stainless and Low Carbon Steel
MDR D-W-AN
Multi-Function Endmill Cutters
CNMG-M3P
Double-Sided 80° Rhombic Inserts for Medium Machining Conditions on Steel
FLSR/L
Tools for External Grooving and Threading Inserts
ER/L-TR
External Trapezoid Shaped DIN 103 Laydown Threading Inserts for Feed Screws
REMT-76
Round Milling Inserts with Ribs on the Rake Face
IDD-E3
Deep Double Tube Drills with External 4 Start Thread Connection and Brazed Tips (.725-2.559 dia.)
GEPI-RX/LX
Precision Double-Ended Inserts for Internal Grooving Next to Shoulder
FR
Face Mills with Round Inserts for Profiling and Milling of Round Corners
FR
Face Mills with Round Inserts for Profiling and Milling of Round Corners
BT-EM (DIN 1835 Form B)
DIN6359 / DIN 1835 Form B Weldon Endmill Holders with BT MAS-403 ADB Tapered Shanks
BT-SEM
ISO 3937 Shell Mill Holders with BT MAS-403 ADB Tapered Shanks
IM-HAD
Holders with an ISO 26622-1(*)Tapered Shank for Internal Facing Adapters
A-MTFNR
Comlock Boring Bars for Negative Triangular Inserts
BT-FC-EM
DIN1835 Form B Endmills with BT MAS-403 Face Contact AD Tapered Shanks
MTE D-C
Indexable Threading Endmills with Cylindrical Carbide Shanks
CAT-FC-SRKIN
Thermal Shrink Chucks with Caterpillar Face Contact AD Tapered Shanks
FRMT
Face Mills for Machining 3D Surfaces of Turbomachinery Blades
T430/T445/T460 SM
30°, 45° and 60° Extended Flute Face Mills, Carrying T490 LNMT/LNHT 13... Tangentially Clamped Inserts
IDD-EC
Deep Double Tube Drills with External 4-Start Thread Connection and Cartridges (1.496-7.244 dia.)
CNMG-MR
Double-Sided 80° Rhombic Inserts for Rough Turning on Stainless Steel and Soft Materials
CAT-FC-SEM-C
Shell EndMill Holders with Coolant Holes and Caterpillar Face Contact AD Tapered Shanks
H690 TNKX/TNCX 1005
Triangular Inserts with 6 Helical Cutting Edges for 90° Shoulder Accuracy
IDD-EF-FB
Deep Double Tube Drills with External 4-Start Thread Connection for High Feed (.984-2.559 dia.)
BT-FC-SEM-C
Shell EndMill Holders with Coolant Holes and BT MAS-403 Face Contact AD Tapered Shanks
DNMM-NM
Single-Sided 55° Rhombic Inserts for Roughing Applications
CNMG-NF
Double-Sided 80° Rhombic Inserts for Semi-Finishing and Finishing Applications
CNMG-NR
Double-Sided 80° Rhombic Inserts with a Special Chipformer for Heavy Machining
MM EC-4
Interchangeable 4 Flute Solid Carbide Endmill Heads with 30°, 45° Helix and Various Corner Radii
MM EC-3
Interchangeable 3 Flute Solid Carbide Endmill Heads with 45° Helix
CNMG-R3P
Double-Sided 80° Rhombic Inserts with a Chipformer for Rough Machining
CNMG-R3M
Double-Sided 80° Rhombic Inserts for Rough Machining of Stainless and Low Carbon Steel
GFN-A
Parting & Grooving Single-Ended Insert, for Parting Aluminum
REMW
Round Insert with a Reinforced Flat Rake for Profile Milling
ER
Endmills with Round Inserts for Profiling and Milling Round Corners
A/E/S-SCLCR/L
Screw Lock Boring Bars for 80° Rhombic Inserts with 7° Clearance
IM-HAPR/L
Perpendicular Holders with an ISO 26622-1 (*) Tapered Shank for Internal Facing Adapters
GITM
CBN Tipped Inserts for Turning and Grooving on Hard Ferrous Materials
BBN
Screw Lock Boring Bars for 11° Clearance Triangular Inserts
GFN-C
Parting & Grooving, Single-Ended Insert, for Parting of Bars, Hard Materials and Tough Applications
GTI ER-ST (tapping)
DIN 6499 ER Tapping Attachments with Straight Shanks
CNMG-WF
Double-Sided 80° Rhombic Wiper Inserts for Finishing Operations at High Feeds
C#-MB
MB Modular Boring Connection System with CAMFIX Exchangeable Shanks
MTE D(Multi Insert)
Multi Insert Threading Endmills with Weldon Shanks
AV FLEX-SLEEVE
Reduction Sleeves for Tool Blocks and VDI Holders
ER-SRK-TJS
Thermal Shrink Chucks with an Integral ER Collet
SDN-CALN13
Full Slot Adjustable Slotting Cutters with Cartridges Carrying T490 LNHT 1306PNTR/L Inserts
ER-SRK-CX
Thermal Shrink Chucks with an Integral ER Collet and Jet Coolant Grooves for Solid Carbide Tools Only
AV-BUSH
Reduction Sleeves for Tool Blocks and VDI Holders
TGTR/L-IQ-2Z
Integral Shank TANG-GRIP Toolholders with 2 Pockets for Parting and Grooving
TGTR/L-JHP
Parting and Grooving Tools with Channels for High-Pressure Coolant Carrying TANG-GRIP Inserts
TGTR/L-D
Integral Shank TANG-GRIP Toolholders with Reinforced Blades for Parting and Grooving Mainly Sub-Spindle Machines
TGBHR/L
Toolholders for Heavy Duty Groove-Turn and Parting Applications
TGTR/L-2T..SH-L120
Integral Shank Short-Head TANG-GRIP Toolholders for Parting and Grooving
BMT## V85-JHP
Toolholders for BMT Turrets with Internal Coolant Supply for MODULAR-GRIP-XL Adapters
GIA-K (long pocket)
Flat Top Precision Double-Ended Inserts with T-Land for Machining Cast Iron
TGTR/L-IQ
Integral Shank TANG-GRIP Toolholders for Parting and Grooving
CNMG-WG/NRW
Double-Sided 80° Rhombic Wiper Inserts for High Feed Turning and High Surface Finish
SCMT-19
Square Inserts with a 7° Positive Flank for Semi-Roughing at Medium to High Feeds
SCMW
Square 7° Positive Flank, Flat Rake Inserts, for Short Chipping Materials
C#-HFIR/L-MC
Boring Bars for Internal Grooving and Turning with CAMFIX Exchangeable Shanks
IR-BUT
Internal BUT - Oil Thread Profile Laydown Threading Inserts for Buttress Casing
CNMG/CNGG-PP
Double-Sided 80° Rhombic Inserts for Machining Very Ductile Materials under Medium Cutting Conditions
GFN-J
Parting & Grooving Single-Ended Insert for Soft Materials, Parting of Tubes, Small Diameters and Thin-Walled Parts
IR-EL
Internal EL - Extreme Line Oil Thread Profile Laydown Threading Inserts
CNMG/CNGG-SF
Double-Sided 80° Rhombic Inserts for Super-Finishing; Controls Chip Flow at Very Low Feeds and Depths of Cut
T290 ELN-10
Endmills Carrying Tangentially Clamped Inserts
ER-M
Endmills with FLEXFIT Threaded Adaptation Carrying Round Inserts for Profiling and Milling Round Corners
CNMG/CNGG-TF
Double-Sided 80° Rhombic Inserts for Machining a Wide Range of Materials under Medium Cutting Conditions
GFN-M
Parting & Grooving Single-Ended Insert, for Parting Nonferrous Bars
IR-MJ
Internal MJ ISO 5855 Metric Full Profile Laydown Threading Inserts for the Aviation and Aerospace Industries
GFN-U
Parting & Grooving Single-Ended Insert, for Low Feeds on Cr-Ni Alloys and Low Carbon Steel
CNMM-M4PW
Very Positive Radial Insert with a Helical Cutting Edge and Positive Rake for Heavy Machining Applications
FDN-CAPM15
Full Slot, Adjustable Slotting Cutters with Cartridges Carrying LNAT 1506...-PM Inserts
GFN-W
Parting & Grooving Single-Ended Insert, Central Ridged Chipformer Used on Steel
TIPI-MT
Precision Ground Double-Ended Internal Threading Inserts with 60° Partial Profile and Chipformer for.787" Min. Bore Dia.
HFFR/L-T
Blades for Face Machining
CNMM-NR
Single-Sided 80° Rhombic Inserts for Rough Turning Applications
GFQR
Face Grooving Inserts
IR/L-ABUT
Internal American Buttress Laydown Threading Inserts for High Force Transmission in One Direction
CNMM-R3P
Single-Sided 80° Rhombic Inserts for Rough Turning Applications on Steel
IR/L-ACME
Internal ACME Profile Laydown Threading Inserts for Feed Screws
CNMS-12
80° Rhombic Single-Sided Inserts for Soft and Nonferrous Materials
GFR/L-C
Single-Ended Parting Insert, for Parting of Bars, Hard Materials and Tough Applications
HELIIR/L
Grooving and Turning Bars with Coolant Holes for HELI-GRIP Utility Inserts
IR/L-API
Internal API - Oil Thread Profile Laydown Threading Inserts
TGIR/L-C
Grooving and Turning Bars with Coolant Holes Carrying TOP-GRIP Utility Inserts
CNMX-M3/4MW
Double-Sided 80° Rhombic Inserts with a High Helical Cutting Edge for High Metal Removal Rates on Stainless Steel
ERP
Endmills Carrying Single-Sided Ceramic Round Inserts
SCD-IXC20
Solid Carbide Drills with Internal Coolant Channels, Drilling Depth 20xD, for Machining ISO K Materials
MTSR M.I. S.P.
Indexable Multi-Insert Threading Endmills with Weldon Shanks for Single Point Inserts
MTSR M.I. S.P.-U
Indexable Multi-Insert Threading Endmills with Weldon Shanks for Single Point U-Type Inserts
MTSR -U (shell mill)
Indexable Multi-Insert Threading Shell Mills, for Single Point U-Type Inserts
SC-HYDRO
Sealed Reduction Sleeves for Hydraulic Chucks
RE MB-ODP
Adapters for MB Modular System Connections to a FLEXFIT Threaded Connection
STGCR/L
91° Lead Angle Screw Lock Tools Carrying Triangular Inserts with 7° Clearance Angle
E/S-SWUBR/L
Screw Clamp Miniature Boring Bars Carrying Small WBMT Trigon Inserts
CNMX-M3/4PW
Double-Sided 80° Rhombic Inserts with a High Helical Cutting Edge for High Metal Removal Rates
IR/L-API RD
Internal API - Oil Thread Round Profile Laydown Threading Inserts
E90X
Endmills Carrying Square Q/S/XOMT Inserts
SDMT-AD-N
Inserts for General Use on 45° Endmills
ST-SEM
ISO 3937 face mill holder with a straight shank.
CAT-MT
DIN 6383 Morse Taper Adapters with Tang DIN228-2 Form D and Caterpillar Tapered Shanks
ER-SRK
Thermal Shrink Chucks with Integral ER Collet
GFR/L-J
Single-Ended Parting Insert for Soft Materials, Parting of Tubes, Small Diameters and Thin-Walled Parts
TIPI-WT
Double-Ended Internal Threading Inserts with a 55° Partial Profile and a Chipformer for .787" Min. Bore Diameter
TGAD
Parting and Grooving Adapters Carrying TANG-GRIP Tangentially Clamped Inserts
CGIN 26
Internal Grooving and Turning Blades for GHIC...-50 Bars
IM-HFIR-MC
Tools for Internal Grooving and Turning with ISO 26622-1(*) Tapered Shank
SDN
Full Slot Disk Type Slotting Cutters
ECM
Multifunctional Endmills for Four Insert Shapes
T490 ELN-11
90° Endmills Carrying T490 LN#T 11... Tangentially Clamped Inserts
MORI## V85-JHP
Toolholders for DMG MORI Turrets with Internal Coolant Supply for MODULAR-GRIP-XL Adapters
SGAQ
SELF-GRIP Mini Blades for Parting and Grooving, Suitable for Swiss-Type Machines
ADMP D22
Parting and Grooving Adapters with 5 Pockets for SLIM-GRIP Inserts
ADMP D45
Parting and Grooving Adapters with 5 Pockets for TANG-GRIP Tangentially Clamped Inserts
T490 ELN-C#-13
90° Endmills with CAMFIX Shanks Carrying Tangentially Clamped Inserts with 4 Helical, 12.5 mm Long Cutting Edges
GFR/L-W
Single-Ended Parting Insert, Central Ridged Chipformer for Steel and Stainless Steel
HCD-QF
90° V-Shaped Inserts with 2 Cutting Edges for Chamfering, Countersinking and Spot Drilling
CPGT-SM
80° Rhombic Inserts with an 11° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
CPMT-PF
80° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys
DCM-3D (.295-1.020")
Drill Body with Exchangeable Heads, Internal Coolant Holes and One Flat Shank. Drilling Depth: 3xD
GIF-E (W=.157-.236)
Precision Double-Ended Inserts for Grooving and Turning
F45E (endmill)
45° Endmills with SEKN/R 12... Inserts
CGPAD
Adapters for CUT-GRIP Inserts
CAT-DC-J
Jacobs Drill Chuck Tapered Adapters with Caterpillar Form A Tapered Shanks
CXMG-F3M
80° Double-Sided and Double-Positive Inserts with a Positive Rake for Finishing on Stainless Steel and H.T.A.
MTET Single Point
Indexable Threading Endmills with Cylindrical Shanks for Single Point Inserts
CXMU-F3M
80° Double-Sided and Double-Positive Inserts with a Positive Rake for Finishing Stainless Steel and H.T.A.
GCPAD #R/L-T#-JHP
Adapters with High-Pressure Coolant Channels Carrying GCP & GCP-R Ceramic Inserts
CXMU-F3P
80° Double-Sided and Double-Positive Inserts with a Positive Rake for Finishing Alloyed Steel
CXMG-F3P
80° Double-Sided and Double-Positive Inserts with a Positive Rake for Finishing on Alloyed Steel
GIMIY
Utility Single-Ended Inserts for Internal Grooving and Turning
IR/L-RND
Internal DIN 405 Round Laydown Threading Inserts for Fire Fighting and Food Industry Pipe Couplings
CGHN 26-M
Internal Grooving and Turning Blades for GHIC...-70 Bars
IR/L-SAGE
Internal Sagengenwinde (DIN 513) Thread Application for High Force in One Direction Application
HSK A-MAXIN
Power Chucks with HSK DIN69893 Form A Tapered Shanks
CXMG-M3M
80° Double-Sided and Double-Positive Inserts with a Positive Rake for Medium Machining on Stainless Steel and H.T.A.
HGPAD-JHP
Adapters with High-Pressure Coolant Channels Carrying HELI-GRIP Inserts
THDR/L-IQ
External Holders for Wide Grooving Inserts
CXMG-M3P
80° Double-Sided and Double-Positive Inserts with a Positive Rake for Medium Machining on Alloyed Steel
THDR
External Holders for Wide Grooving Inserts
IR/L-STACME
Internal STUB ACME Laydown Threading Inserts with a Shallow ACME Profile for Control Valves
GIF
Precision Double-Ended Inserts for Grooving
TGHN 26-M
Internal Grooving and Turning Blades for GHIC...-70 Bars
DCM-5D (.295-1.020")
Drill Body with Exchangeable Heads, Internal Coolant Holes and One Flat Shank. Drilling Depth: 5xD
GIF (full radius)
Precision Double-Ended Full Radius Inserts for Grooving
F45E
45° Face Mills Carrying SEKN/R 12... Inserts
BT-FC-MB
MB Modular Boring System with BT MAS-403 Face Contact AD Tapered Shanks
TGPAD-JHP
Adapters with Channels for High-Pressure Coolant Carrying TGMF / TGMP Groove-Turn Inserts
BT-MB
MB Modular Connection System with BT MAS-403 FORM AD Taper Shanks
HSK A-MT
DIN 6383/DIN 228-2 Form D Tang Morse Taper Adapters with DIN 69893/A HSK Tapered Shanks
TGPAD
Adapters Carrying TGMF / TGMP Groove-Turn Inserts
HSK A-EM (Weldon)
DIN6359 Side Clamp Holders for Weldon Shanks with HSK DIN69893 Form A Tapered Shanks
S-DDUNR
R-Clamp Boring Bars, for ISO Negative DNMG Inserts
SCD-IXC30
Solid Carbide Drills with Internal Coolant Channels, Drilling Depth 30xD, for Machining ISO K Materials
PICIN-A-SWUBR/L
PICCO Tools on which Small WBMT/WBGT Trigon Inserts are mounted
PICIN-SWUBR/L
Solid Carbide PICCO Tools Carrying Small WBMT/WBGT Trigon Inserts
SDMT-PDR-HQ
General Use Inserts with Four Helical Cutting Edges for 90° Shoulder Milling
SGB
Single-Sided Blades for SELF-GRIP Parting & Grooving Inserts
SGFH (four-pockets)
Parting and Grooving Four-Pocket Blades
SGFH/R/L
SELF-GRIP Blades with and without Coolant Holes for Parting and Grooving with Single-Ended Inserts
SGFHR/L-26T/32T
SELF-GRIP F-Type, Double- and Single-Ended, Reinforced Holder Blades
SGFS
Replacement SELF-GRIP Blades for HSS and Brazed Parting Tools
CGHN 32-M
Internal Grooving and Turning Blades
H690 FWN-07
90° Face Mills Carrying H690 WNMU 0705 Double-Sided Trigonal Inserts with 6 Helical Cutting Edges
MA##### V##-JHP
Toolholders for Mazak Turrets with Internal Coolant Supply for MODULAR-GRIP-XL Adapters
H690 FWN-04
90° Face Mills Carrying H690 WNMU 0403 Double-Sided Trigonal Inserts with 6 Helical Cutting Edges
H690 F90AX-16
90° Face Mills Carrying H690 TNKX 1606.. Triangular Inserts with 6 Helical Cutting Edges
HTF-R-LN10
Face Mills Carrying Tangentially Clamped Inserts with 4 Cutting Edges for Extra Fine Milling Applications
CGHN 32-DGM
Internal Grooving and Turning Blades for GHIC...-85 Bars (self-clamping)
DCM-8D (.394-1.020")
Drill Body with Exchangeable Heads, Internal Coolant Holes and One Flat Shank. Drilling Depth: 8xD
C#-DTGNR/L
91° Lead R-Clamp External Turning Tools with CAMFIX Exchangeable Shanks Carrying Negative Triangular Inserts
SXCNN
External Toolholders for Specially Tailored Wide Profile Grooving Inserts
ERCM
Multifunctional Coarse Pitch Endmills for Four Insert Shapes
FTHN
Square Shank Toolholders for FTB Profile Turning Inserts
S890 FSN-13
88° Face Mills Carrying Inserts with 8 Cutting Edges
MT LNH#-ISO (Internal)
Thread Milling Inserts for Internal ISO Metric Profile
ER-EX
DIN 6499 ER-EX Single Diameter Spring Collets with Super Finish Surface and Special Anti-Corrosion Protection
F45ST (endmill)
45° Screw Clamped Endmills with SEK/MT 12... Inserts
GIMY 1260
Utility Single-Ended Inserts for External Grooving and Profiling
MT LNH#-NPS
External and Internal NPS Full Profile Thread Milling Inserts for Mechanical Joining and Pipe Fittings
S-4400W
Steel Shanks with Through Coolant for H-Type Interchangeable Heads
AV-D-VH
Anti-Vibration Bars with Through Coolant for Interchangeable Turning Heads
SH-S#-N-AVC
Square Shank Holders with Serrated Connection
S890 SM
Extended Flute Cutters Carrying Double-Sided Square Inserts with 8 Cutting Edges
SDK-10-C/HP
Extended Flute Shell Mills Carrying SDHW/T 100408... Inserts
SDK-12-C/HP
Extended Flute Shell Mills Carrying SDHT 1205... Inserts
MT LNH#-NPSF
External and Internal NPSF Full Profile Thread Milling Inserts
MT LNH#-UN (Internal)
Thread Milling Inserts for American (UN, UNC, UNF, UNEF, UNS) Full Profile Threads for General Applications
DCMT-F3P-SL
55° Rhombic Inserts with a Positive Flank with a Locating Bottom Ridge for Semi-Finishing and Finishing on Steel
H490 SM-09
Extended Flute Shell Mills Carrying H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
H490 SM-17
Extended Flute Shell Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
HMSDV SXCN
Adapter Holders for Wide Profile Grooving Inserts, for Davenport Machines
HSM90S APCR 1405
Super Positive Inserts with a Polished Rake for Machining Aluminum at High Rotation Speed
DCMT-M3M-SL
55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Machining Stainless and Low Carbon Steel
MT LNH#-W
External & Internal Whitworth (BSW, BSF, BSP) Full Profile Thread Milling Inserts for Fittings and Pipe Couplings
MT LNHT-ABUT
External & Internal Single-Sided American Buttress Thread Milling Inserts
TJS TSD DISPLAY
RPM speed display for SPINJET high speed spindles, supplied with AC/DC power supply adapter.
IQ845 FSY-C#-R07
50° Face Mills Carrying Square Inserts with 8 Cutting Edges
ER-EX-AA
DIN 6499 AA Single Diameter Ultra Precise ER Spring Collets with Super Finish Surface and Anti-Corrosion Protection
DCMT-PF-SL
55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Finish Turning on Soft Materials & Exotic Alloys
BT-DC-J
Jacobs Tapered Adapters for Drill Chuck Arbors with BT MAS-403 Tapered Shanks
ER-SRK-JET2
Thermal Shrink Chuck with Three Internal Cooling Jets and an Integral ER Collet
MM TRD-W
Interchangeable Solid Carbide Milling Heads for 55° Partial Profile Thread Milling
HSK FM-SRKIN
Thermal Shrink Chucks with HSK DIN69893 FM Tapered Shanks with Two Pins for MAKINO Machine Models MAG Series A
AV-RE-MB
MB Modular System Anti Vibration Reducers
GHFGR/L-8
Holders for Face Turning and Grooving
SGAFR/L
SELF-GRIP Integral Shank Tool for Swiss Automatic Machines
SGTFR/L-D
SELF-GRIP Reinforced Tool for Parting & Grooving
SGTFR/L
SELF-GRIP, Integral Shank Tool for Parting & Grooving
SGFR/L-B-D-SH
Integral Shank, Short Head, Parting and Grooving Toolholder, for CNC and Swiss Automatics
DCMT-SM-SL
55° Rhombic Inserts with a Positive Flank and Locating Bottom Ridge for Finish Turning on Soft Materials & Exotic Alloys
C#-V60-JHP
Toolholders for CAMFIX Adaptations with Internal Coolant Supply for MODULAR-GRIP-XL Adapters
MT LNHT-BSPT
External and Internal Thread Milling Inserts for BSPT Full Profile
MT LNHT-NPT
External and Internal NPT Full Profile Thread Milling Inserts for Steam, Gas and Water Pipes
HSM90S EAL-14
Long Reach Endmills Carrying HSM90S APCR 1405... Inserts for Machining Aluminum
SEK-AF..
Flat Rake Face Milling Inserts for General Use
HM90 EAL-15
Long Reach Endmills Carrying HM90 AXCR 1505... Inserts for Machining Aluminum
MT LNHT-NPTF
External and Internal NPTF Full Profile Thread Milling Inserts for Steam, Gas and Water Pipes
MT LNHU-ISO (External)
Thread Milling Inserts for External ISO Metric Profile
MT LNHU-PG
External and Internal PG Full Profile Thread Milling Inserts (DIN 40430) for Electrical Connectors
MM TRF 60°
Interchangeable Solid Carbide Milling Heads for 60° Partial Profile Thread Milling
MM TRF 55°
Interchangeable Solid Carbide Milling Heads for 55° Partial Profile Thread Milling
GADR/L-JHP
Adapters with High-Pressure Coolant Channels Carrying Groove-Turn Inserts for up to .98" Deep Machining
MM TRD-M
Interchangeable Solid Carbide Milling Heads for 60° Partial Profile Thread Milling
GADR/L-8
Adapters for up to .98" Deep Machining
FST
Top-Side Cutting, Flanged Type Slotting Cutters
MT LNHU-UN (External)
External (UN, UNC, UNF, UNEF, UNS) Full Profile Thread Milling Inserts for General Industries
SEKR-AF-N-42
Super Positive Square Milling Inserts for 45° Finishing and Medium Machining Soft Materials
SEKR-AF..-76
Square Milling Inserts with Ribs Along Edges for 45° Roughing Applications
SEKR-AFTR-HS
Square Milling Inserts with Chip Splitting Serrated Cutting Edge for 45° Roughing Applications
F90SP-10
Face Mills Carrying S/X/QPMT 1004... Inserts
DR-2D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
F90SD-12
Face Mills Carrying Square Inserts
EX CF (CLICKFIT extension) M
CLICKFIT Extension Adapters
CAT-ER-CLICKIN
Caterpillar Form AD Tapered Shanks to CLICKIN Quick Change Connection Adapters
AV-EX-MB
MB Modular System Anti Vibration Extensions
GQHINR/L
Internal Grooving and Turning Bars on which Inserts with 4 Cutting Edges are mounted
F90SD
Face Mills Carrying S/QDM# 12... Inserts
TPMT
Triangular 11° Positive Inserts with a Positive Chipformer Exerts Low Cutting Forces for Internal Finish Turning
HSK T ## V60-JHP
Toolholders for HSK-T Adaptations with Internal Coolant Supply for MODULAR-GRIP-XL Adapters
SEMN
Square milling inserts with different corner radii, used for heavy machining
DNGX (CER)
Negative 55° Rhombic Double-Sided Ceramic Inserts for Machining Cast Iron
DNGX-DIMPLE (CER)
Negative 55° Rhombic Double-Sided Ceramic Dimple Inserts for Machining Cast Iron
DGPAD-XL-JHP
Parting and Grooving Extra Long Adapters with Coolant Channels Carrying DO-GRIP Inserts
DGPAD-JHP
Adapters with High-Pressure Coolant Channels for DO-GRIP Parting and Grooving Inserts
TAGPAD-JHP
Parting and Grooving Adapters with Coolant Channels for High-Pressure Carrying TANG-GRIP Inserts
T490 FLN-08
90° Face Mills Using Tangentially Clamped Inserts with 4 Helical, .315" Long Cutting Edges
DR-3D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
MT-W-MM
Carbide Milling Heads with a Threaded Connection for Internal and External 55° BSW Thread Profile
ER-SRF
SHRINKIN Thermal Shrink Chuck with a CLICKIN Quick Change Adaptation
BCM
Ball Nose Endmills with Tangent Straight Edge Inserts for Finish Profiling
MTH-BSPT (int. & ext.)
Helical External & Internal Thread Milling Inserts for BSPT Thread for Steam, Gas and Water Pipes
SMH MB
Shell Mill Holders with MB Modular Boring System Connection
T890HT FLN-R13
90° Face Mills Carrying T890 LN.T 1306... Tangentially Clamped Inserts with 8 Cutting Edges
HM90 FAL-15
Face Mills Carrying HM90 AXCR 1505.. Inserts for Machining Aluminum
HSM90S EAL-HSK-FM-14
Endmill with Integral HSK FM Type Shanks for Makino Machine Models MAG Series A Flange-Pin Spindles for Milling Aluminum
HSM90S FAL-14
90° Face Mills Carrying Super Positive and Polished Rake Inserts for Machining Aluminum at High Rotation Speeds
HM90 FAL-22
Face Mills Carrying HM90 APCR 2206... Inserts for Machining Aluminum
HM90 FAL-16BR
Face Mills Carrying HM90 APCR 1605... Inserts with Corner Radii Equal to or Larger Than .197" for Machining Aluminum
HM90 EAL-16BR
Endmills Carrying HM90 APCR 1605... Inserts with Corner Radii Equal or Larger Than .197" for Machining Aluminum
HM90 EAL-16
Long Reach Endmills Carrying HM90 APCR 1605 Inserts for Machining Aluminum
HM90 FAL-16
Face Mills Carrying HM90 APCR 1605... Inserts for Machining Aluminum
INDN AP UNIT US
SHRINKIN Induction Heating Unit for Shrink Tool Chucking.
MTH-ISO (internal)
Helical Thread Milling Inserts for ISO Metric Internal Threading
T490 FLN-16
90° Face Mills Carrying Tangentially Clamped Inserts with 4 Long (.630") Helical Cutting Edges
MTH-NPT (int. & ext.)
External & Internal NPT Helical Thread Milling Inserts for Steam, Gas and Water Pipes
INDN BS UNIT US
SHRINKIN Induction Heating Unit for Shrink Tool Chucking.
BCM-MM
Ball Nose Endmills with MULTI-MASTER Threaded Adaptation that Mount Tangent Straight Edge Inserts for Finish Profiling
DR-4D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
MTH-NPTF (int. & ext.)
External & Internal NPTF Helical Thread Milling Inserts for Steam, Gas and Water Pipes
ECAI-H4R-CF
Solid Carbide Endmills with Different Helix 3, 4 and 5xD Neck Relief for Machining Aluminum
ECKI-H4R-CF
4 Flute Endmills with Different Helix, Chamfered Cutting Edges and Variable Pitch, for Chatter Dampening on Titanium
ECI-H-CF
6-20 Flute Endmills with Different Helix and Variable Pitch, for CHATTERFREE High Speed Finish Milling
ECI-H4M-CF-E
4 Flute Endmills with Different Helix and Variable Pitch, for Chatter Dampening
ECI-E7/H7-CF
7 Flute Endmills with Different Helix and Variable Pitch, for CHATTERFREE High Speed Finish Milling
Anti-Vibration Blades
Anti-Vibration Blades for Deep Grooving and Turning
ECI-H4S-CFE
Short, 4 Flute Endmills with Different Helix and Variable Pitch, for Chatter Dampening
TGMA
Utility Double-Ended Inserts for External and Internal Grooving and Turning of Cast Iron
SCCD-ACP3
Three Flute Solid Carbide Drills with Coolant Holes, Drilling Depth 3xD
ECYI-S5-CFS
5 Flute Endmills with Different Helix for Milling Austenitic, Duplex, Cast and Precipitation Hardened Stainless Steels
ECI-4-VF
4 Flute Endmill With and Without Relieved Necks, Assorted Radii and Variable Pitch for Chatter Dampening
ECI-H4R-CF
4 Flute Endmills with Different Helix (35 & 37°), Assorteed Radii and Variable Pitch for Chatter Dampening
ECI-H4R-CF(relieved neck)
4 Flute Endmills with 3xD Relieved Necks, Different Helix (35 & 37°) and Variable Pitch for Chatter Dampening
ECI-H5R-CF
5 Flute Endmills with Different Helix (36-38°) and Variable Pitch for Chatter Dampening with Assorted Radii
T490 ELN-16
90° Endmills Carrying Tangentially Clamped Inserts with 4 Helical, .630" Long Cutting Edges
ECI-E4-CF
4 Flute Chatter Dampening Endmills with 3xD Relieved Necks, 38° Helix, Variable Pitch and Chamfered or Radius Corners
ECI-E5-CF
5 Flute Medium Length Endmills, 38° Helix and Variable Pitch for Chatter Dampening, Includes Tools with Corner Radius
TGMF/P
Utility Double-Ended Inserts for External and Internal Grooving and Turning
TGMF (full radius)
Utility Double-Ended Full Radius Inserts for External and Internal Grooving and Profiling
FSB
Bottom-Side Cutting, Flanged Type Slotting Cutters
BHR MB
Rough Boring Heads for Diameter Range .709-7.874"
ECI-3-VF
3 Flute Endmill With and Without Relieved Necks, Assorted Radii and Variable Pitch for Chatter Dampening
ICP-MNC
Exchangeable SUMOCHAM Drilling Heads for Modular Combi Drills
ILP
Exchangeable Drilling Heads for DLN Drills, for Machining ISO P and ISO K Materials
SET ER-SPR
DIN 6499 ER Spring Collet Set with Super Finish Surface and Special Anti-Corrosion Protection
SSB
Single-Side Cutting, Disk Type Slotting Cutters
SEA-AF..
Flat Rake Milling Inserts for General Use
BCM-M
Ball Nose Endmills with FLEXFIT Threaded Adaptation Carrying Tangent Straight Edge Inserts for Finish Profiling
BI## V##-JHP
Toolholders for Biglia/EUROTECH Adaptation with Internal Coolant Supply for MODULAR-GRIP-XL Adapters
MTH-UN (internal)
Helical Thread Milling Inserts for American Full Profile Internal Threading. Intended for General Applications
C#-SIR/L
Internal Threading Bars with CAMFIX Exchangeable Shanks
MTH-W (int. & ext.)
External & Internal Whitworth (BSW, BSF, BSP) Helical Thread Milling Inserts for Fittings and Pipe Couplings
F45LN-N15
45° Face Mills with LN..1506... Tangentially Clamped Inserts
ECAI-B3-U
3 Flute Endmills for Machining Aluminum and Other Non-Ferrous Materials.
ECAI-B3-EC
DLC Coated 3 Flute Endmills for Machining Aluminum and Other Non-Ferrous Materials.
BLP-M
Three Flute Fully Effective 240° Ball Nose Endmills with FLEXFIT Threaded Adaptation
BLP Shell Mill
Three Flute Fully Effective 240° Ball Nose Cutters with Shell Hole Adaptation
HM90 ADKT 1505PD-W
Wiper Insert for High Surface Finish
NPT THREADING FLDC-NPT-E
Double-Ended, Precision, Flat Top Multi-Tooth Threading Inserts
C#-GHAIR/L
Boring Bars with CAMFIX Exchangeable Shanks for Internal Grooving and Turning
C#-GHIC
CUT-GRIP holders with CAMFIX Exchangeable Shanks for Internal Grooving and Turning Blades
T290 FLN-15
90° Face Mills Carrying T290 LNMT 1506... Tangentially Clamped Inserts
ICM
Exchangeable SUMOCHAM Drilling Heads for Machining ISO M and ISO S Materials
NPMX 0803 RB/RG
Inserts for Drilling Heads ISD-EC / IDD-EC / ISD-IC
DR-4D-T (Metric)
Indexable Insert Drills for Non-Rotating Applications with Coolant Holes and One Flat Shank, Drilling Depth 4xD
ICN
Exchangeable SUMOCHAM Drilling Heads for Machining ISO N Materials
CGHN-8-10D
Heavy Duty Deep Grooving and Turning Blades
F90LN-N11
90° Face Mills Carrying LN..1106... Tangentially Clamped Inserts
SET ER-SPR-AA
Sets of DIN 6499 'AA' Ultra Precise ER Spring Collets with Super Finish Surface and Special Anti-Corrosion Protection
SGFFR/L
Face Grooving Integral Shank Tools
HM90 EAL-CF4-16
Long Reach Endmills with CLICKFIT Adaptation Carrying HM90 APCR 1605... Inserts for Machining Aluminum
CDP D-M
Ball Nose Endmills with FLEXFIT Threaded Adaptation
HP ANKT 0702-FF
Inserts for Fast Feed Milling
P290 FPW
90° Face Mills Carrying .472 and .708" Long Edged Inserts
CM D.31-1.00
Ball Nose Endmills
DR-5D-N
Indexable Square Insert Drills with Coolant Holes, Drilling Depth 5xD
SCCD-ACP5
Three Flute Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD
ER-SEAL-AA-METRIC
DIN 6499/ ISO 15488-B ER Sealed Single Diameter Collet with Super Finish Surface and Special Anti-Corrosion Protection
SEM CF (CLICKFIT)
DIN 3937 Shell Mill Holder with a CLICKFIT Quick Change Adaptation and Coolant Holes
GTIN ER-ANSI (tapping)
ER Collet Tapping Attachments, Tension and Compression ANSI Type, CNC Milling and Turret Lathe Machines
EFSI-B44
A Combination of Roughing and Finishing Solid Carbide Endmills in a Single Tool
SET ER-SEAL-AA-INCH
DIN 6499/ ISO 15488-B ER Sealed Single Diameter Collet with Super Finish Surface and Special Anti-Corrosion Protection
MI## V60-JHP
Toolholders for Miyano Adaptation with Directed Internal Coolant for MODULAR-GRIP-XL Adapters
EFSI-E44
A Combination of Roughing and Finishing Solid Carbide Endmill with Variable Pitch for Chatter Free Milling
SET ER-SEAL-AA-JET-INCH
DIN 6499/ ISO 15488-B ER Sealed Single Diameter Collet with Special Anti-Corrosion Protection Featuring 4 Cooling Jets
DR-CA
DR Large Diameter Drills (2.244-3.125") with Cartridges and One Flat Shank
SCIR-22-MTR-ISO
Precision Ground ISO Metric Full Profile Threading Inserts
BT-ER-CLICKIN
BT MAS 403 AD Tapered Shanks to CLICKIN Quick Change Connection Adapters
TGHN-D
Double-Ended Blades Carrying Utility Inserts for Grooving and Turning
SGFFH
Face Grooving Blades
GIP-RX/LX
Precision Double-Ended Inserts for External Grooving Next to a Shoulder
PADR/L
Adapters for GDMW/GDMY Groove-Turn Inserts
A/E/S-SDUCR/L
Screw Lock Boring Bars for 55° Rhombic Inserts with 7° Clearance
SCIR/L-22-MTR/MTL
Threading Inserts with a 60° Partial Profile
SCIR/L-41-MTR/MTL
Threading Inserts with a 60° Partial Profile
KNUX
55° Parallelogram Profiling Inserts
STUB ACME THREADING FLAS-PT-E
Double-Ended, Precision, Flat Top External Threading Inserts
NPHT
Peripheral Precision Inserts for Drilling Heads ISD-EF-FB / IDD-EF-FB / ISD-IF-FB
NPMT
Internal and Central Inserts for Drilling Heads ISD-EF-FB / IDD-EF-FB
LNMX-HF
Tangentially Clamped Rough Turning Inserts for High Feed (up to .094 inch/rev)
TGHN-S
Single-Ended Blades Carrying Utility Inserts for Grooving and Turning
SCCD-ACF3
Three Flute Solid Carbide Flat Head Drills with Coolant Holes, Drilling Depth 3xD
TIP-P-BSPT
Precision Ground BSPT (British Standard Pipe) External Double-Ended Full Profile Threading Inserts with a Chipformer
FCP
Exchangeable Flat Bottom SUMOCHAM Drilling Heads, for Machining ISO P and ISO K Materials
NT## V60-JHP
Toolholders for Nakamura-Tome Adaptation with Internal Coolant Supply for MODULAR-GRIP-XL Adapters
TIP-P-BSW
American (BSW, BSF, BSP) Precision Ground External Double-Ended Full Profile Threading Inserts with a Chipformer
APK-FE
Extended Flute Endmills Carrying APKT/R-10... Inserts
ECI-E6 (CER)
Solid Ceramic Endmills with 6 Flutes for Machining Nickel-Based Alloy Materials
TIP-P-ISO
Precision Ground ISO Metric Full Profile Double-Ended External Threading Inserts with a Chipformer
TIP-P-NPT
NPT (National Pipe Threads) Precision Ground Double-Ended External Full Profile Threading Inserts with a Chipformer
QCMT-PF
Four 80° Cornered Insert with a Positive 7° Clearance and Chipformer for Finishing Applications
SPK
Extended Flute Carrying Square inserts 1.25-2.00 dia.
TPMX
Inserts for Drilling / Counterboring / Trepanning Tools
ER-SEAL-AA-INCH
DIN 6499/ ISO 15488-B ER Sealed Single Diameter Collet with Super Finish Surface and Special Anti-Corrosion Protection
ADK
Extended Flute Cutters with ADKT/R-15... Inserts
QCMT-SM
Inserts with a Positive 7° Clearance and Chipformer for Finishing Applications
TIP-P-UN
American UN (UNC,UNF,UNEF) Precision Ground External Double-Ended Full Profile Threading Inserts with a Chipformer
SET ER-SPR-EMI
Sets of ER Spring Collets DIN 6499 with HARD TOUCH Coating
QNMG-GN
Double-Sided Inserts with Four 80° Corners for General Applications
SET ER-SPR-EM
Sets of DIN 6499 ER Spring Collets with Super Finish Surface and Special Anti-Corrosion Protection
QNMG-NF
Double-Sided Inserts with Four 80° Corners for Finishing Applications
SM
Extended Flute Shell Mills Carrying HM90 ADKT 1505... Inserts
QNMG-PP
Double-Sided Inserts with Four 80° Corners for General Applications
QNMG-TF
Double-Sided Inserts with Four 80° Corners for General Applications
MNC-5D
Large Diameter Indexable Drills with a Pilot Drilling Head and One Flat Shank, Drilling Depth 5xD
TTG-16E-A55
External Inserts with 10 Threading Corners and a 55° Partial Profile for General Industry
XPMT-UB
Inserts for ISD/ISC Drilling/Boring Heads
IQ845 SYHU-07
Square Inserts with 8 Cutting Edges
MNC-3D
Large Diameter Indexable Drills with a Pilot Drilling Head and One Flat Shank, Drilling Depth 3xD
SCCD-ACF5
Three Flute Solid Carbide Flat Head Drills with Coolant Holes, Drilling Depth 5xD
TTG-16E-A60
External Inserts with 10 Threading Corners and 60° Partial Profile for General Industry
ER-SEAL-AA-JET-INCH
DIN 6499/ ISO 15488-B ER Sealed Single Diameter Collet with Special Anti-Corrosion Protection Featuring 4 Cooling Jets
RCGT-AS
Round Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
MT-ISO-MM
Carbide Milling Heads with a Threaded Connection for Internal ISO Metric Thread
MT-UN-MM
Carbide Milling Heads with a Threaded Connection for Internal UN Thread Profile
LNAR 1106 (PCD)
Tangentially Clamped Milling Inserts with a Brazed PCD Tip for Machining Aluminum
ECRI-B-M
Solid Carbide Endmill Roughers, 4 Flute 45° Helix Medium Length (2xD) for High Stock Removal Rates
SM-16
Extended Flute Shell Mills Carrying HM90 APCR 1605... Inserts for Machining Aluminum
RCGX (CBN)
CBN Round Inserts with a Flat Rake for Machining Cast Iron and Hardened Steel
OKUMA # V60-JHP
Toolholders for OKUMA Adaptation with Internal Coolant Supply for MODULAR-GRIP-XL Adapters
TTG-16E-ISO
External ISO Metric (DIN13 12-1986 class: 6G) Threading Inserts with 10 Threading Corners for General Industry
S890 SNMU 1305PN
Double-Sided Square Inserts with 8 Cutting Edges
LNAR 1106PN-R-S-W (PCD)
Tangentially Clamped Wiper Milling Inserts with a Brazed PCD Tip for Machining Aluminum
TTG-16E-UN
External American UN Full Profile (UN, UNC, UNF, UNEF) Threading Inserts with 10 Threading Corners for General Industry
RCGX (CER)
Positive Round Ceramic Inserts for Machining Cast Iron, Hardened Steel, and Heat-Resistant Alloys
RCMT-14
Round Inserts with a 7° Positive Flank for Medium and Finish Profiling on a Wide Range of Materials
TSU-M08 V60-JHP
Base Holders for TSUGAMI Adaptation with Internal Coolant for MODULAR-GRIP-XL Adapters
RCMT-M3P
Round Inserts with a 7° Positive Flank for Medium Profiling on a Wide Range of Materials
CDH (CER)
Ceramic Inserts for Maching Mill Rolls and Heat-Resistant Alloys
GTGA
Precision Shallow Grooving Inserts with 3 Cutting Edges
LNAR 1506 PN-R-S (PCD)
Tangentially Clamped Insert with a Brazed PCD Tip for Machining Aluminum
RCMT-SR
Round Inserts with a 7° Positive Flank for Medium Profiling on a Wide Range of Materials
XPMT-45
Inserts for ISC Boring Heads
PCADR/L 34N-RE
Reinforced Adapters for PENTACUT Grooving Inserts
HFP-IQ
Exchangeable DFN Drill Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
UN THREADING FLTC-E
Double-Ended, Precision, Flat Top Full Profile Threading Inserts
LNAT 1106-W
Tangentially Clamped Wiper Inserts
RCMX
Round Inserts with a 7° Positive Flank and Reinforced Cutting Edge for Semi-Roughing and Rough Profiling
GTMA
Utility Shallow Grooving Inserts with 3 Cutting Edges
SET SC-SPR
Sets of SC Straight Collets for MAXIN Power Chucks
V## V##-L##
Spacer for ISCAR Modular System
RCMX-NR
Round 7° Inserts with a Positive Flank and Strong Cutting Edge for Rough Turning
RCMX-M3P-R
Round 7° Inserts with a Positive Flank and Strong Cutting Edge for Rough Turning
RCMX-R3P-R
Round 7° Inserts with a Positive Flank and Strong Cutting Edge for Rough Turning
LNAT 1506-W
Tangentially Clamped Wiper Inserts
RNMG
Double-Sided Round Negative Insert for Medium and Rough Profiling
LNAT 1506AN-W
Tangentially Clamped Wiper Inserts for 45° Lead Angle on F45LN Cutters
LNAW-11 (CBN)
Tangentially Clamped Inserts with a PCBN Brazed Tip for Machining Hard Materials
RPGX (CER)
Positive Round Ceramic Inserts for Machining Cast Iron, Hardened Steel and Heat-Resistant Alloys
IHP-BD
Exchangeable Drilling Heads for DCN Drills for Machining Construction Beams and Structural Steel Materials
IFHP-BD
Exchangeable DFN Drill Heads for Machining Construction Beams and Structural Steel Materials
SET SC-SEAL
Set of SC Straight Collets with Coolant Holes for MAXIN Power Chuck
LNAW-15 (CBN)
Tangentially Clamped Inserts with a PCBN Brazed Tip for Machining Hard Materials
SC45MT-SM
Single-Sided Square Inserts for Finishing Applications (CHAMELEON Multifunction Pocket System)
SCGT-AS
Square Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
V## MAHD#-#-XL-##-JHP
Intermediate Holders for ISCAR Modular System Holders with Directed Internal Coolant for MODULAR-GRIP-XL Adapters
IFP-IQ
Exchangeable DFN Drill Heads for Machining ISO P, ISO M and High Temp. Alloys (ISO S) Materials
V## SQ#-#-D82-JHP
Intermediate Holders for TANG-F-GRIP and DO-F-GRIP Square Type D82 Adapters Designed for Modular Tooling Systems
SCMT-14
Square Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
HGR/L-C
Inserts for Parting Bars, Hard Materials and Tough Applications
V## SQ#-#-D65-ECD
Intermediate Holders for TANG-F-GRIP (TGAQ-ECD) Square D65 Adapters Designed for Modular Tooling Systems
HGR/L-J/JS
Double-Sided Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts
P290 SM
Extended Flute Shell Mills Carrying .472 and .708" Long Edged Inserts
P290 ACK
Extended Flute Endmills Carrying .472 and .708" Long Edged Inserts
LNHT 1106 PN-R HT
Tangentially Clamped Inserts with 4 Straight Right-Hand Cutting Edges
SCMT-SM
Square Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
LNHW 1506 ANTN (CER)
Tangentially Clamped Ceramic Inserts for High Speed Cast Iron Machining
SNGX (CER)
Negative Square Double-Sided Ceramic Inserts for Machining Cast Iron.
H3P
Exchangeable 3 Flute Drilling Heads for Machining Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
V## MAHD-XL-JHP
Intermediate Holders for ISCAR Modular System Holders with Directed Internal Coolant for MODULAR-GRIP-XL Adapters
SNGX-DIMPLE (CER)
Negative Square Double-Sided Ceramic Dimple Inserts for Machining Cast Iron
F3B
Exchangeable 3 Flute Counterboring Heads
F3P
Exchangeable 3 Flute Flat Drilling Heads for Machining Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
LNKX 150608AN-N PL
Tangentially Clamped Inserts with a Positive Rake Angle for Cast Iron
SNMG-EM-M/R
Double-Sided Square Inserts for Medium Machining on High Temperature Alloys
LNKX/LNMT 150608ANTN MM
Tangentially Clamped Inserts with a Negative Land and Reinforced Chipformer for Unfavorable Cutting Conditions
SNMG-F3M
Double-Sided Square Inserts for Stainless Steel Finishing Applications
LPGIB
Blank Inserts for Producing Inverted T Grooves
LNMT 1506PN-R-TS
Tangentially Clamped Inserts with a Serrated Cutting Edge for Chip Splitting
ECPI-E4L
4 Flute 38° Helix with 3xD Relieved Necks and Chip Splitting Cutting Edges Solid Carbide Roughing Endmills
V#TJS
Axial, Short Intermediate holders for High Speed Spindles Designed for Modular Tooling Systems
V#TJS-P
Radial, Short Intermediate Holders for High Speed Spindles Designed for Modular Tooling Systems
LNMW 150608 ANTN
Tangentially Clamped Insert with a Reinforced Negative Land, for Unfavorable Cutting Conditions
IDI-SG
General Use DCM Drill Heads
IDI-SK
DCM Drill Heads for Cast Iron
MTH-F
Helical Long Edge Finishing Inserts
C#-ASHR/L-45-HPMC
Holders with CAMFIX Exchangeable Shanks Carrying Square Shank Tools for 45° Mounting on Turn-Mill Machines
PENTA 17-NX-RS
Pentagonal Inserts for Precision Grooving and Parting Off for Next to Shoulder Applications
ECPI-E3L
3 Flute 38° Helix with 3xD Relieved Necks and Chip Splitting Cutting Edges Solid Carbide Roughing Endmills
OECR
Octagonal Milling Inserts with Positive Rake and Sharp Cutting Edges
OEMT/OEKT 060405
Octagonal Milling Inserts for General Use
PENTA 17-P-RS/LS
Pentagonal Inserts for Grooving and Parting Soft Materials, Thin and Miniature Parts
OEMW-AETN
Octagonal Flat Rake Inserts for Cast Iron
OFCR/OFCT-RW/AER (wiper)
Octagonal Milling Inserts with Four Wiper Cutting Edges
OFMR
HELIOCTO octagonal milling insert with a positive rake. Used for stainless steel and high temperature alloys.
OFMT 05
Octagonal milling inserts
EPNCI
Solid Carbide Endmill with Special Cutting Edges, for Machining Different Composite Materials
TR45 MAHDR-#-XL-JHP
Toolholders for Traub TNK45 / TNK 65 Machines with Directed Internal Coolant for MODULAR-GRIP-XL Adapters
CGHR/L-12-14D
Deep Machining Screw-Clamped Blades for Wide Grooving and Heavy Turning Applications
SPMR
Square Inserts with a Positive Chipformer Exerting Low Cutting Forces for Semi-Finishing and Finishing Applications
TCGT-AS
Triangular Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
PENTA 24N-J-RS
Parting and Precision Grooving Pentagonal Inserts for Next to High Shoulder Applications
TCMT (CBN)
Triangular Positive Inserts with a Single CBN Flat Rake Tip for Machining Hardened Steel
EBSI-A-3
3 Flute, 30° Helix, Short Solid Carbide Ball Nose Endmills
ONHQ-TN
16MILL Octagonal Double-Sided Ceramic Face Milling Inserts
ERFI-A/E-3,4,6
3, 4, and 6 Flute, 30° and 38° Helix, Solid Carbide Roughing Endmills, with 3xD Relieved Neck for Alloy Steel
TCMT (PCD)
Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Aluminum
ONHU 0505-W
Double-Sided Octagonal Wiper Inserts with 4 or 8 Cutting Edges
CR THDN-IQ
Cartridges for Blades Carrying Wide Grooving Inserts
ONHU 0706AN-R-W
Double-Sided Octagonal Wiper Inserts with 8 Right-Hand Cutting Edges
TCMT-14
Triangular, 7° Positive Flank Inserts, for Semi-Finish and Finish Turning on Soft Materials and Exotic Alloys
ONHU 0806-N-PL
Octagonal Inserts with a Sharp Edge and Positive Land for Cast Iron
ONHU 0806AN-W
Double-Sided Octagonal Wiper Inserts
PENTA 24R/L-J
Inserts with 5 Cutting Edges for Parting Tubes, Small and Thin-Walled Parts
TCMT-F3P
Triangular Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Steel
PENTA 24R/L-DSL
Parting Insert with 5 Angled Cutting Edges to Minimize Burr Size. Can Be Clamped Also on Standard PENTA CUT Holders.
TGV R/L
Double Sided Tangential Insert with Lead Angle Cutting Edge to minimize Burr size, Intended for Parting Small Parts
CATI-FC-MB
MB Modular Boring System Connections with Caterpillar Form Face Contact Tapered Shanks
EBI-E4L-CF
4 Flute, 38° Helix Ball Nose Endmills with 3xD Relieved Necks and Variable Pitch for Chatter Dampening on Hard Materials
PENTA 24R/L-Z
Inserts with 5 Cutting Edges for Parting Tubes, Small and Thin-Walled Parts
ONHU/ONMU 080608 AN-N-HP
16MILL Double-Sided Octagonal Face Milling Inserts for High Temperature Alloys, Stainless Steel and Steels
EBI-A-4
4 Flute Solid Carbide Ball Nose Endmills
TCMT-SM
Triangular Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
CATI-MB
MB Modular Boring System Connections with Caterpillar AD Form Tapered Shanks
PENTA 24R-C
Inserts with 5 Cutting Edges for Parting Bars, Hard Materials and Tough Applications
ONHU/ONMU-05
Octagonal Double-Sided Inserts with 16 Cutting Edges
PENTA 24R-P
Inserts with 5 Cutting Edges for Parting Soft Materials, Thin Walls and Miniature Parts
TR45TNL MAHDN-R-XL-JHP
Toolholders for Traub TNL16 to TNL18 / TNL32 Machines with Internal Coolant Supply for MODULAR-GRIP-XL Adapters
ONHU/ONMU-08-TN-MM
Double-Sided Octagonal Face Milling Inserts for General Steel Machining
TNGA (CER)
Negative 60° Triangular Double-Sided Ceramic Inserts for Machining Cast Iron, Hardened Steel, and Heat-Resistant Alloys
ONHU/ONMU-08-TN/HL
Double-Sided Octagonal Face Milling Inserts for Cast Iron and Rough Applications
TNGA-J(CBN)
Triangular Multi-Cornered CBN Inserts for Machining Hardened Steel
ONMU 1008
Double-Sided Heavy Duty Octagonal Inserts with 16 Cutting Edges
TNGA-M3 (CBN)
Triangular Inserts with 3 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys
PENTA 34N-C
Inserts with 5 Cutting Edges for Parting and Grooving Hard Materials, Tough and General Applications
TNGA-MC/M6 (CBN)
Triangular Multi-Cornered CBN Inserts for Machining Hardened Steel
ONMU/ONHU 0706
Double-Sided Octagonal Inserts with 16 Cutting Edges
EBSI-A-2
2 Flute, 30° Helix, Short Solid Carbide Ball Nose Endmills
OXMT 0507
Octagonal High Feed 45° Inserts
PENTA 34N-J
Inserts with 5 Cutting Edges for Parting and Grooving Soft Materials, Parting Tubes, Small and Thin-Walled Parts
PENTA 34N-PB
Parting and Grooving Pentagonal Inserts for Parting Bearing Steel and Other Ductile Materials
TNMA
Double-Sided Triangular Inserts with no Chipformer for Short Chipping Materials
QGI 30N-PF
4 Cutting Edged Inserts with a Positive Flat Rake for Parting and Precision Grooving
QGI 30N-P
4 Cutting Edged Inserts with a High Positive Flat Rake for Parting and Precision Grooving
TNMA (CBN)
Triangular Inserts with a Single Corner CBN Tip for Machining Cast Iron and Hardened Steel
PENTA 34R/L-C
Inserts with 5 Cutting Edges for Parting Hard Materials, Tough and General Applications
C#-SH-JHP
Serrated Connection Shanks with a CAMFIX Exchangeable Adaptation
C#-SH-E-JHP
Serrated Connection Shanks with Carbide Core and a CAMFIX Exchangeable Adaptation
PENTA 34R/L-J
Inserts with 5 Cutting Edges for Parting Tubes, Small and Thin-Walled Parts
TNMG-F3M
Double-Sided Triangular Inserts for Finish Turning on Stainless and Low Carbon Steel
TNMG-F3P
Double-Sided Triangular Inserts for Semi-Finishing and Finishing Applications
PENTA 34R/L-PB
Pentagonal Inserts for Parting Bearing Steel and other Ductile Materials
EBSI-A-4
4 Flute, 30° Helix, Short Solid Carbide Ball Nose Endmills
ECSI-E-3
3 Flute 38° Helix with 3xD Relieved Necks, Short Solid Carbide Endmills
PENTA D-N-C
Inserts with 5 Cutting Edges for Parting and Grooving Hard Materials, Tough and General Applications
TR TNK36 MAHDL-R-XL-JHP
Toolholders for Traub TNK36 / TNL26 Machines with Internal Coolant Supply for MODULAR-GRIP-XL Adapters
PENTA D-N-J
Inserts with 5 Cutting Edges for Parting and Grooving Soft Materials, Parting Tubes, Small and Thin-Walled Parts
TNMG-GN
Double-Sided Triangular Inserts for General Applications
PENTA D-N-PB
Pentagonal Inserts for Parting and Grooving Bearing Steel and Other Ductile Materials
TNMG-M3M
Double-Sided Triangular Inserts for Machining Stainless and Low Carbon Steel
PENTA D-R/L-C
Inserts with 5 Cutting Edges for Parting Hard Materials, Tough and General Applications
TNMG-M3P
Double-Sided Triangular Inserts for Medium Machining Conditions on Steel
PENTA D-R/L-J
Inserts with 5 Cutting Edges for Parting Tubes, Small and Thin-Walled Parts
EBLI-A-4
4 Flute, 30° Helix, Long Solid Carbide Ball Nose Endmills
QPMR 1004-HQ-M
Super Positive Square Milling Inserts for Machining Aluminum, Stainless Steel and High Temperature Alloys
TNMG-NF
Double-Sided Triangular Inserts for Semi-Finishing and Finishing Applications
TNMG-PF
Triangular Double-Sided Inserts for Finishing on Alloyed and Stainless Steel
PENTA D-R/L-PB
Pentagonal Inserts for Parting Bearing Steel and other Ductile Materials
PENTAS 27 blanks
Blank Inserts with 5 Wide Cutting Edges for the Production of Special Profile Contours
SCD-ACP3 (3xD)
Solid Carbide Drills with Coolant Holes, Drilling Depth 3xD
TNMG-SF
Triangular Double-Sided Inserts for Super Finishing; Controls Chip Flow at Very Low Feeds and Depths of Cut
TNMG-TF
Double-Sided Triangular Inserts for Machining a Wide Range of Materials under Medium Cutting Conditions
PMN D-C
Utility Inserts with 5 Cutting Edges for Parting and Grooving of Hard Materials, Tough and General Applications
PMN D-J
Utility Parting and Grooving Insert with 5 Cutting Edges, for Soft Materials and Parting of Tubes
TNMG-VL
Double-Sided Triangular Inserts with a Chipformer for High Temperature Alloys and Stainless Steel Valves
SCD-ACP5 (5xD)
Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD
TNMG/TNGG-PP
Double-Sided Triangular Inserts for Machining Very Ductile Materials under Medium Cutting Conditions
EX-MB
Extensions for the MB Modular Connection System
PMN D-PB
Utility Parting and Grooving Pentagonal Inserts for Parting Bearing Steel and Other Ductile Materials
ECPI-H7-CF
7 Flute Solid Carbide Endmills with Different Helix, Variable Pitch and Chip Splitting Cutting Edges
T490 LNK-CAT50
Modular Extended Flute Endmills with Caterpillar Tapered Shanks, Carrying T490 LNMT/HT 1306 Inserts
SC-PICCO
Reduction Sleeves for Round Shank Holders for Modular Back-End Machining System
T490 LNK-CAT50-FT
Basic Units of Modular Extended Flute Endmills with Caterpillar Tapered Shanks, Carrying T490 LNMT/HT 1306 Inserts
EFFI-S4/S6
4/6 Flute with Relieved Necks, Fast Feed High Productivity Solid Carbide Endmills
TNMM-NR
Single-Sided Triangular Inserts with a Special Chipformer for Heavy Machining
ECI-A-2
2 Flute 30° Helix, Center Cutting Solid Carbide Endmills
TNMS-12
Triangular Single-Sided Inserts for Soft and Nonferrous Materials
SOGT-W
Precision Ground Inserts with DT General Use Chipformer and a Wiper for MNC Drills
ABC MAHDR-#-XL-JHP
Toolholders for Index ABC Speedline with Internal Coolant Supply for MODULAR-GRIP-XL Adapters
MM EC-Z4-1.5xD
Interchangeable Solid Carbide Endmill Heads with 1.5xD Flute Lengths for Roughing and Finishing
SOGX-W
Precision Ground Inserts with DT General Use Chipformer and a Wiper for MNC Large Diameter Drills
TNMX-M3/4MW
Double-Sided Triangular Inserts with High Helical Cutting Edge for High Metal Removal Rates on Stainless Steel
EFPI-E4,5CF
Solid Carbide Roughing Endmills with Chip Splitting Cutting Edges, Variable Pitch and Large Radius Front Edge
MM EFS-CF
4 Flute Solid Carbide Heads with 38° Helix and Variable Pitch for CHATTERFREE Roughing and Finishing Applications
ECAI-H3-CF
Solid Carbide Endmills with Different Helix, Variable Pitch and 2, 3, 4 and 5xD Relieved Necks for Machining Aluminum
MM EC-CF
Interchangeable Solid Carbide Endmill Heads for CHATTERFREE Roughing and Finishing Operations
ECI-E-3
3 Flute, 38° Helix, Medium Length, Solid Carbide Endmills
ECAI-F-2
2 Flute, 55° Helix, Medium Length Solid Carbide Endmills for Machining Aluminum
ECI-E-4R
4 Flute 38° Helix Medium Length Solid Carbide Endmills with Assorted Radii
ECCI-A-4
4 Flute, 30° Helix, Medium Length, Solid Carbide Endmills with Chamfered Corners
ECI-A-4
4 Flute, 30° Helix, Medium Length, Solid Carbide Endmills
ECI-B-3
3 Flute, 45° Helix, Medium Length, Slot / Drill Solid Carbide Endmills
ECCI-A-2
2 Flute 30° Helix, Center Cutting Medium Length Solid Carbide Endmills with Chamfered Corners
ECRI-B3
3 Flute 45° Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks, for High Stock Removal Rates of Aluminum
ECAI-B-3
3 Flute, 45° Helix, Medium Length, Solid Carbide Endmills for Machining Aluminum
MM EFS
Combination of Interchangeable Solid Carbide Endmill Heads for Roughing and Finishing
ECAI-B-2
2 Flute, 45° Helix, Medium Length, Solid Carbide Endmills for Machining Aluminum
ECI-B-4
4 Flute, 45° Helix, Medium Length, Solid Carbide Endmills
TNMX-M3/4PW
Double-Sided Triangular Inserts with High Helical Cutting Edge for High Metal Removal Rates on Steel
SCIR/L-22-N/R/L
Grooving and Parting Inserts
SCD-ACP5N (5xD)
DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD
SCD-ACP3N (3XD)
DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 3xD
SCD-FNPCD
Solid Carbide Drills with PCD Full Nib Insert for Composite Materials (CFRP) and Stack Machining
SCD-WPCD
Solid Carbide Drills with PCD Insert for Composite Materials (CFRP) and Stack Machining
SCD-CVD
Solid Carbide Drills with CVD Coating for Composite Materials (CFRP) and Stack Machining
TPGB
Triangular Inserts with an 11° Positive Flank for Short Chipping Materials
SCD-ACP8FL (8XD)
Solid Carbide Drills with Coolant Holes, Drilling Depth 8xD (Available in North America Only)
SCD-ACP3FL (3XD)
Solid Carbide Drills with Coolant Holes, Drilling Depth 3xD (Available in North America Only)
SCD-ACP5FL (5XD)
Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD (Available in North America Only)
TPGB-XL
Triangular Inserts with an 11° Positive Flank for Short Chipping Materials
SCIR/L-22-NP
Grooving, Turning and Parting Inserts
FLSR/LT
External Tools for Deep Grooving Inserts
TPGH-R/L
Triangular Inserts with an 11° Positive and Ground Chipformer for Finish Turning
TPGH-XL
Triangular Inserts with an 11° Positive and Ground Chipformer for Finish Turning
RPMT
Round inserts with chipformers for general profile milling
RPMW
Round milling inserts with a flat rake, used for copying and rough milling
TPG (CER)
Positive 60° Triangular Ceramic Inserts for Machining Cast Iron and Hardened Steel
RE MB-MB
Reducers for the MB Modular Connection System
TPGT-SP
Super Positive Triangular Inserts with 11° Clearance for Fine Boring and Finish Turning
SCIR/L-41-N/R/L
Grooving and Parting Inserts
SCIR/L-41-NP
Grooving, Turning and Parting Inserts
TPGX (PCD)
Triangular Inserts with PCD Single Top Corner Brazed Tip, 11° Clearance and Positive Rake Angle for Finishing Aluminum
S845 SNHU 1305-W
Double-Sided Wiper Inserts with 4 Cutting Edges
MM EBC
Interchangeable Solid Carbide Ball Nose Milling Heads
S845 SNHU 1806AN-N-W
Wiper Insert with 2 R.H. and 2 L.H. Cutting Edges
MM EB
Interchangeable Solid Carbide Ball Nose Milling Heads
MM HRF
Interchangeable 2 Flute Solid Carbide Ball Nose Finishing Milling Heads
TPMR
Triangular 11° Positive Inserts with a Positive Chipformer Exerting Low Cutting Forces for Internal Finish Turning
MM ECK-CF
Five and Six-Flute Heads with 35°/38° Helix Featuring Different Corner Radii For Machining Titanium Alloys
S845 SNMU 2608
Heavy Duty Thick Square Inserts with 8 Helical Right-Hand Cutting Edges
ECI-E-4
4 Flute 38° Helix Medium Length Solid Carbide Endmills
MM EC-H-5-CF
Interchangeable Carbide Endmill Heads for CHATTERFREE Milling of High Temperature Alloys such as titanium and inconel
S845 SNMU/SNHU 1806
Square Inserts with 8 Helical Right-Hand Cutting Edges
TPMR-PF
Triangular 11° Positive Inserts with a Positive Chipformer Exerting Low Cutting Forces for Internal Finish Turning
ECI-E4 (CER)
Solid Ceramic Endmills with 4 Flutes for Machining Nickel-Based Alloy Materials
TPMT-PF
Triangular 11° Positive Inserts for Semi-Finishing and Finishing Applications
MM EBA-2
Interchangeable 2 Flute High Precision Solid Carbide Ball Nose Heads for Machining Aluminum
S845 SXMU/SXCU-16
Square Thick Inserts with 8 Helical Right-Hand Cutting Edges
RE MB-AVI
MB Modular System with Carbide Core Reducers
TAG R/L-C
Single-Ended Inserts for Parting Bars, Hard Materials and Tough Parting Applications
VBGW/VBMW-2 (CBN)
35° Positive Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel
TAG R/L-J/JS
TANG-GRIP Inserts for Parting Soft Materials, Tubes, Small Diameters and Thin-Walled Parts
VBMT (CBN)
Single Corner CBN Tipped Inserts with a Flat Rake for Machining Hardened Steel
SCD-SXC30
Solid Carbide Drills with Internal Coolant Channels, Drilling Depth 30xD
SCD-SXC40
Solid Carbide Drills with Internal Coolant Channels, Drilling Depth 40xD
SCD-SXC50
Solid Carbide Drills with Internal Coolant Channels, Drilling Depth 50xD
SCD-SXC16
Solid Carbide Drills with Internal Coolant Channels, Drilling Depth 16xD
SCD-SXC20
Solid Carbide Drills with Internal Coolant Channels, Drilling Depth 20xD
SDHT/X 120508
Square Inserts for Machining Titanium, High Temperature Alloys and Stainless Steel
MM HCR
Interchangeable 2 Flute Solid Carbide Ball Nose Milling Heads
SDHT/W 1004
Square Inserts for Machining Titanium, High Temperature Alloys and Stainless Steel
TIGER
Utility Single-Ended Inserts for External Heavy Grooving and Deep Machining
SDKR
Chip-splitting, serrated cutting edge milling insert
SDMR-HQ
Super Positive Square Insert for Aluminum, Stainless Steel and High Temperature Alloys
TIGER-IQ
Utility Single-Ended Inserts for External Heavy Grooving and Deep Machining
VCGW-2 (CBN)
35° Positive Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel
TIGERV
Utility Single-Ended Inserts for External Deep Grooving and Heavy Machining
MM HBR
Interchangeable 2 Flute High Precision Ball Nose Solid Carbide Milling Heads
SDMT-PDR-RM
Insert with Helical Cutting Edges for 90° Shoulder Milling
SC-SPR
SC Straight Collets for MAXIN Power Chucks
VCMT-14
35° Rhombic Inserts with a 7° Positive Flank for Semi-Finish and Finish Turning on Soft Materials and Exotic Alloys
SECT/SEMT 1404
Positive Square Inserts for General Soft and Clean Cutting
SEHT-AFN
Precision Ground Sharp Cutting Edged General Use Milling Inserts for 45° Milling Cutters
MM ETR
Torodial 6 Flute Interchangeable Solid Carbide Milling Heads
SEHW-AFTN
Precision Ground Sharp Cutting Edge Milling Inserts for General Use
VCMW
35° Rhombic Inserts with a 7° Positive Flank for Short Chipping Materials such as Cast Iron
VNGA-2 (CBN)
35° Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys
VNGA-4 (CBN)
35° Rhombic Inserts with 4 CBN Tips for Machining Hardened Steel
VNGA (CER)
Negative 35° Rhombic Double-Sided Ceramic Inserts for Machining Cast Iron, Cast Iron and Heat Resistant Alloys.
SC-SEAL
Sealed Collets for MAXIN Power Chucks
SEKT-AFTN
Square Screw-Clamped Inserts for Medium Machining
VNGA-J(CBN)
35° Rhombic Inserts with 4 CBN Tips for Machining Hardened Steel
VNGG-M4HM (CBN)
35° Rhombic Insert with 4 Chipbreaking CBN Tips for Machining Hardened Steel
SEMT 12..AFTN-76
Milling Inserts with Ribs Along Edges for Heavy Machining
SEMT 1204AF-R-HS
Square Milling Inserts with a Chip Splitting Serrated Cutting Edge for 45° Roughing
VNMG-F3M
Double-Sided 35° Rhombic Inserts for Finishing on Stainless Steel
VNMG-F3P
Double-Sided 35° Rhombic Inserts for Semi-Finishing and Finishing Applications on Steel
SEMW 1204AFTN
Flat Rake Square Milling Inserts, for 45° General Use
SC-T (sleeves)
Reduction Sleeves for Holders with Exchangeable Adaptation
VNMG-M3M
Double-Sided 35° Rhombic Inserts for Machining Stainless and Low Carbon Steel
VNMG-SF
Double-Sided 35° Rhombic Inserts for Super Finishing
VNMG-TF
Double-Sided 35° Rhombic Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions
SPK ED..
Flat Rake Milling Inserts for General Use
C#-ASHR/L
Holders with CAMFIX Exchangeable Shanks for External Square-Shank Tools
C#-ASHR/L-HPMC
Holders with CAMFIX Exchangeable Shanks for External Square Shank Tools with High-Pressure Multi-Connection
C#-ASHA-HPMC
Perpendicular Holders with CAMFIX Shanks for External Square Shank Tools with High-Pressure Multi-Connection
C#-ABB
Adapters with CAMFIX Exchangeable Shanks for Boring Bars with Reduction Sleeves
SD-S-A-ER-SP
Solid ER Collets with SD Spline Connection (SP)
VNMG/VNGG-NF
Double-Sided 35° Rhombic Inserts for Semi-Finishing and Finishing Applications
SPKR ED..-76
Square Milling Inserts with Ribs Along the Edges for 45° Roughing
VNMM-PP
Single-Sided 35° Rhombic Inserts for Machining Very Ductile Materials under Medium Cutting Conditions
SPKR EDTR-HS
Square Positive Inserts with Chip Splitting Serrated Cutting Edges
SPMT-HQ
Square Positive Inserts for Right-Hand Tools for General Use
VNMS-12
35° Rhombic Single-Sided Inserts for Soft and Nonferrous Materials
SPCT/SPMR PDR
Precision Insert Used for Semi-Finishing and Finishing Applications
SPMT-HP
High Positive Inserts for Machining Stainless Steel and High Temperature Alloys
C#-TBU
Blocks with CAMFIX Exchangeable Tapered Shanks for Parting and Grooving Blades
C#-GHAD-8
Holders with CAMFIX Exchangeable Shanks for Grooving, Turning and Facing Adapters
C#-GHAPR/L-8
Perpendicular Holders with CAMFIX Exchangeable Shanks for Grooving, Turning and Facing Adapters
C#-HAD
Holders with CAMFIX Exchangeable Tapered Shanks for Internal Facing Adapters
C#-HAPR/L
Perpendicular Holders with CAMFIX Exchangeable Shanks for Internal Facing Adapters
C#-MAHDR-45
Holders with CAMFIX Exchangeable Shanks for Parting, Grooving, Turning and Facing Adapters
C#-TBK-R/L
Blocks with CAMFIX Exchangeable Shanks for Parting and Grooving Blades
WBGT
Trigon Inserts with a 5° Positive Flank Ground Chipformer for Finish Turning
C#-MAHD
Holders with CAMFIX Exchangeable Shanks for Parting, Grooving, Turning and Facing Adapters
C#-MAHPD
Perpendicular Holders with CAMFIX Exchangeable Shanks Carrying Adapters for Parting, Grooving, Turning and Facing
T290 LNMT 1506
Tangential Insert with 2 Cutting Edges
C#-MAHD-JHP
Holders with CAMFIX Exchangeable Shanks and High Pressure Coolant Channels for MODULAR-GRIP Adapters
C#-MAHPD-JHP
Perpendicular Holders with CAMFIX Exchangeable Shanks for Parting, Grooving, Turning and Facing Adapters
C#-GHAD-JHP
Holders with High Pressure Coolant Channels and CAMFIX Exchangeable Shanks for Grooving and Turning
WBMT
Trigon Inserts with a 5° Positive Flank Ground Chipformer for Finish Turning
BBH D16
Extension Slides for MB Modular Fine Boring Holders
BBH 30/40
Extension Slides for MB Modular Fine Boring Holders
SH-DX-HI
Extension Shanks for Sliding Insert Holders for BSFD-H/I Boring Heads
WNGA (CER)
Negative 80° Trigon Double-Sided Ceramic Inserts for Machining Cast Iron, Hardened Steel and Heat-Resistant Alloys
WNGA-M3 (CBN)
Multi-Cornered CBN Inserts for Machining Hardened Steel
WNGA-MC/M6 (CBN)
Multi-Cornered CBN Inserts for Machining Hardened Steel
WNGG-F3N
Double-Sided Sharp Edged Positive and Polished Rake Inserts for Finishing Aluminum and Other Non-Ferrous Materials
WNGP-F2M
Double-Sided Trigon Inserts for Super Finish Machining Conditions on Stainless Steel
BHEH
Slides for MB Modular BHE Fine Boring Holders
BHFH
Counter Weight Slides for MB Modular Fine Boring Holders
SGFH 26-M
Internal Grooving Blades, for GHIC...-70 Bars
WNGP-F2P
Double-Sided Trigon Inserts for Super Finish Machining Conditions on Alloyed Steel
T490 LNMT/LNHT 1607
Tangentially Clamped Inserts with 4 Helical Cutting Edges
WNMA/WNMA-WG
Double-Sided Trigon Inserts for Short Chipping Materials such as Cast Iron
T490 LNMT/LNHT 2212
Tangentially Clamped Inserts with 4 Helical Cutting Edges
WNMG-CERMET
Double-Sided Trigon Cermet Grade Inserts for Semi-Finishing and Finishing Applications
WNMG-F3M
Double-Sided Trigon Inserts for Stainless Steel Finishing Applications
WNMG-F3P
Double-Sided Trigon Inserts for Semi-Finishing and Finishing Applications
HSK A-SEM
ISO 3937 Shell Mill Holders with HSK DIN69893 Form A Tapered Shanks
TNHF
Double-sided face milling insert for machining cast iron, used mainly by the automotive industry.
WNMG-F3S
Double-Sided 80° Trigon Inserts for Titanium and Heat Resistant Materials Finishing Applications
WNMG-GN
Double-Sided Trigon Inserts for General Applications
TNKF-AN-LM
Double-sided face milling insert for machining cast iron, used mainly by the automotive industry.
TNMF-AN-LM
Double-sided face milling insert for machining cast iron, used mainly by the automotive industry.
WNMG-M3M
Double-Sided Trigon Inserts for Machining Stainless and Low Carbon Steel
WNMG-M3P
Double-Sided Trigon Inserts for Medium Machining Conditions on Steel
TPK/TPKR
11° Positive Triangular Milling Inserts for General Use
TPU
Triangular positive inserts with a flat rake, used for short chipping materials
WNMG-NF
Double-Sided Trigon Inserts for Semi-Finishing and Finishing Applications
ADBH
Sleeve for MB Modular Fine Boring Holders
WNMG-NR
Double-Sided Trigon Inserts with a Special Chipformer for Heavy Machining
WNMG-PP
Double-Sided Trigon Inserts for Machining Very Ductile Materials under Medium Cutting Conditions
WNMG-SF
Double-Sided Trigon Inserts for Super Finishing
WNMG-TF
Double-Sided Trigon Inserts for Machining a Wide Range of Materials under Medium Cutting Conditions
WNMG-TNM
Double-Sided Trigon Inserts for Semi-Roughing and Roughing Applications
SLEEVE
Reduction Sleeves for Boring Bars on the MB Modular Boring System
WNMG-VL
Double-Sided Trigon Inserts with a Chipformer for High Temperature Alloys and Stainless Steel Valves
WNMG-WF
Double-Sided Trigon Wiper Inserts for Finishing Operations at High Feeds
WNMG-WG
Double-Sided Trigon Wiper Inserts for High Surface Finish at High Feed Turning
WNMM-NM
Single-Sided Trigon Inserts for Roughing Applications
CW32
Counter Balancing Weight Used on BHEH Slide for Fine Boring Holders
PRESET CX
Preset Screws for SRKIN Thermal Shrink Chucks
HMSDV
Adapter Holders for Davenport Machines
WOMG-6-R3P-IQ
Double-Sided 7° Negative Side Flank Trigon Inserts for Heavy Turning of Steel
YNMG-F3P
Double-Sided 25° Corner Inserts for Internal and External Deep and Narrow Profiling and Undercutting
BSFD DISPLAY UNIT
Digital Display Unit for BSFD Boring Heads with 40 µin Accurate Adjustment
ADP-V-IG
Adapter Plate for Diameter Range Extension of the CAR-V-I/IG Insert Holders
SPACER STUB
Stub Spacer Rings In Accordance with DIN2084-B Standard
EMH MB
Weldon and Whistle Notch Side-Lock Holders with the MB Modular Boring Connection System
AVC-SET
Center Height Set Up Device
AVC-SET-LEV
Center Height Set Up Device
CC MB-ER
DIN 6499 ER Collet Chuck with the MB Modular Boring Connection System
WRENCH COOL TUBE C#
Clamping and Removing Wrenches for CAMFIX (ISO 26623-1) Cooling Tubes
AOMT/AOGT
Inserts for DR Drills
DC MB
DIN238 DC Drill Chuck Arbor with the MB Modular Connection System
MM ERS
Interchangeable Solid Carbide Rough Milling Heads for High Metal Removal Rates
MM ERS-1.5xD
Interchangeable Solid Carbide Rough Milling Heads with 1.5xD Flute Lengths for High Metal Removal Rates
Torx/Hex Blades
Blades for Adjustable Torque Handles
Key Blades
Key Blades for Fixed Torque Handles
Adjustable Torque Handles
Adjustable Torque Handles for Screw Drivers
HSK A-FM
DIN 6357 Face Mill Holders with HSK DIN 69893 Form A Tapered Shanks
MM Adjustable Torque Keys
Adjustable Torque Handle and Keys for Secure and Accurate Tightening of MULTI-MASTER Milling Heads
HSD Fixed Torque Handles
Fixed Torque Handles for Screw Drivers
AMT MB-MT
MB Modular Connection System with Morse Taper Tang DIN 228 A/B
BLANK MB
Blanks with MB Modular Connection System
ECHI-B6
6 Flute 45° Helix, Medium Length Solid Carbide Endmills for Finishing Hard Materials up to 65 HRC
SCREW EM
Lock Screw for Endmill Holder
SD FM
Interchangeable Solid Carbide Face Milling Heads
MM FM
Interchangeable Solid Carbide Face Milling Heads with MULTI-MASTER Threaded Connections
BHEI MB
Fine Boring Head for the MB Boring System .0004" Direct Dia. Adjustment and .00008" by a Vernier Scale
MM EC-6
Interchangeable 6 Flute Solid Carbide Endmill Heads with 30°, 45° Helix and Various Corner Radii
MM EC-D
Interchangeable 6, 8, 10 Flute Solid Carbide Endmill Heads with 50° Helix for Machining Hardened Steel
MM EC-8/10
Interchangeable 8, 10 Flute Solid Carbide Endmill Heads with 30°, 45° Helix and Various Corner Radii
MM EC-CF-Z7/9-1.5xD
Interchangeable 7, 9 Flute Solid Carbide Endmill Heads with 36° Helix and 1.5xD Flute Lengths
BAR-CC0602-HI
Indexable Boring Bars for the BSFD-H/I Boring Heads
BSFD MB
Digital Fine Boring Heads with 40 µin Accurate Adjustment and Detachable Display
BSFD-V MB-I
Digital Fine Boring Vario Head with 40 µin Accurate Adjustment and Detachable Display
BSFD MB-H
Digital Fine Boring Head with 40 µin Accurate Adjustment and Detachable Display
BHD MB
Fine Boring Heads with Digital .0001" Direct Adjustment Diametric Display
BHFI MB50-MB80
Fine Boring Heads with .00008" Direct Diametric Adjustment
BHFI MB16-MB50
Fine Boring Heads with .00008" Direct Diametric Adjustment
MM ERA
Interchangeable Solid Carbide Rough Milling Heads for Machining Aluminum at High Metal Removal Rates
ECLI-B-6
6 Flute, 45° Helix, Long Solid Carbide Endmills
ECXI-B-6
6 Flute 45° Helix, Center Cutting Extra Long Solid Carbide Endmills
HSK A-ER-CLICKIN
CLICKIN Quick Change Connection Adapters with HSK DIN 69893/A Tapered Shanks
TCMT-M3P
Triangular Inserts with a 7° Positive Flank for medium machining Turning on Steel
TNGG-M3N
Double-Sided Sharp Edged Positive and Polished Rake Inserts for Finishing Aluminum and Other Non-Ferrous Materials
P290 ACK-C#-18
Extended Flute Endmills with CAMFIX Shanks Carrying .709" Long Edged Inserts
T490 LNK-13-C#
Extended Flute Endmills with CAMFIX Shanks Carrying T490 LNMT/HT 13... Tangentially Clamped Inserts
TCMT-M3M
Triangular Positive Flank Inserts, for Machining Stainless and Low Carbon Steel
COOLING TUBE C#
Cooling Tubes for CAMFIX (ISO 26623-1) Shanks
QC95MT-SM
Square Positive Inserts with 80° Corners for Finishing (CHAMELEON Multifunction Pocket System)
PS BT-MAZAK (Pull Stud)
BT Pull Stud with ANSI Retention Knob for MAZAK Machines
MM SPD-3T
Three-Flute Exchangeable Solid Carbide Drilling Heads
NQCH FIXTURE
Auxiliary handle for easy insert replacement
PS BT-MAS (Pull Stud)
BT Pull Stud with MAS Retention Knob
WNMZ-RF/LF
Double-Sided Trigon Inserts with a Ground Chipformer for Finishing Applications
TNGZ/TNMZ
Double-Sided Triangular Inserts for Medium and Finishing Applications
PS BT-JIS (Pull Stud)
BT Pull Stud with JIS 6339 Retention Knob
KIT TGFH
Each Kit Contains One Parting and Grooving Blade, 10 TANG-GRIP Single-Ended Inserts and an Extractor
T490 LNK-13
Extended Flute Endmills Carrying T490 LNMT/HT 1306... Tangentially Clamped Inserts
T490 LNM-08
Extended Flute Endmills Carrying T490 LNMT/HT 08... Tangentially Clamped Inserts
DCMT-M3P
55° Rhombic Positive Flank Inserts, for Medium Machining Conditions on Steel
T490 LNK-11
Extended Flute Endmills Carrying T490 LN#T 11... Tangentially Clamped Inserts
T490 CAP-13FT
Extension Units for Modular Extended Flute Shell Mills
PS CAT-ANSI (Pull Stud)
CAT Pull Stud ANSI Retention Knobs
3M AXK-13
Heavy Duty Extended Flute Endmills Carrying 3M AXKT 1304... Inserts 1.0"-1.5" dia. range.
PS CAT-JIS (Pull Stud)
CAT Pull Stud JIS Retention Knob
T490 SM-11
Extended Flute Shell Mills Carrying T490 LN#T 11... Tangentially Clamped Inserts
T490 SM-13
Extended Flute Shell Mills Carrying T490 LNMT/HT 1306... Tangentially Clamped Inserts
RC90MT-SM
Single-Sided Round Inserts for Semi-Roughing and Roughing Applications (CHAMELEON Multifunction Pocket System)
3M SM
Heavy Duty Extended Flute Shell Mills Carrying 3M AXKT 1304.../2006... Inserts
PS CAT-MAS (Pull Stud)
CAT Pull Stud with MAS Retention Knobs
PS OTT-BT (Pull Stud)
BT/SK Pull Stud with OTT System Retention Knob
HP ANK-07
Extended Flute Endmills Carrying HP ANK-07... Inserts
CROWN (ECD)
Crown Clamping Mechanism with a Single Screw for Fast Clamping and Indexing. Features Two Effective Coolant Holes
JHP HOSE
High-Pressure Coolant Hose
JHP CONNECTOR
High-Pressure Connector
T490 FLN-11
90° Face Mills Carrying T490 LN#T 11... Tangentially Clamped Inserts
JHP NIPPLE
High-Pressure Adaptation Nipple
H490 ANK-09
Extended Flute Endmills Carrying H490 ANKX 09... Double-Sided Rectangular Inserts with 4 Helical Cutting Edges
HSK A-WH-TBK-R/L
Blocks with HSK Exchangeable Tapered Shanks for Parting and Grooving Blades
JHP ELBOW
High-Pressure Adaptation Elbow
F90LN-N15
90° Face Mills with LN..1506... Tangentially Clamped Inserts
TCMW
Triangular, 7° Positive Flank Inserts, for Short Chipping Materials
PRESET SC CAP
Preset Screw Housing for SC-SPR MAXIN Collets
PRESET SCREW HYDRO
Tool Stopper Preset Screws for the HYDRO Collet Chucks
SNMS-12
Square Single-Sided Inserts for Soft and Nonferrous Materials
PRESET MAXIN
Tool Stopper Preset Screws for MAXIN Collet Chucks
TNMM-RP
Single-Sided Triangular Inserts for Roughing of Soft and Ductile Materials
3M F90AX-13
Heavy Duty 90° Face Mills with 3M AXKT 1304.. Inserts
CNMM-NM
Single-Sided 80° Rhombic Inserts for Roughing Applications
3M F90AX-20
Heavy Duty 90° Face Mills Carrying 3M AXKT 2006.. Inserts
CNMM-H5P
Single-Sided 80° Rhombic Insert with a Strong Cutting Edge for Extra Rough Turning
CNMM-H4P
Single-Sided 80° Rhombic Insert with a Strong Cutting Edge for Extra Rough Turning
SNMM-H3P
Single-Sided Square Inserts with a Strong Cutting Edge for Extra Rough Turning
SNMM-H5P
Single-Sided Square Insert with a Strong Cutting Edge for Extra Rough Turning
SNMM-H4P
Single-Sided Square Inserts with a Strong Cutting Edge for Extra Rough Turning
COOLANT SET
Clamping Screws with Adjustable Protruding Nozzles for Shell-Type Face Mills
HSK A63WH-ASHR/L-1
Square Shank Tool Adapters with HSK Exchangeable Shanks, for Turn-Mill Machines
SEM Clamping Screws
Lock Screws for Shell Mill Holders
SQ KEY
Driven Key for COMBI Shell Mill Holders for Assembling Disk Cutters
BH MB COUPLING SET
COOLING TUBE HSK-A
Cooling Tubes for HSK-A Shanks
TOOL CLAMP
Tool Clamp Fixture for ISO, CAT A.N.S.I. B5.50 and BT MAS-403 Tool Shanks
MULTI-CLAMP C#
Rotary Clamping Fixtures for CAMFIX (ISO 26623-1) Tapered Shank Toolholders
HSK A63WH-MAHDOR
Holders with HSK Exchangeable Shanks for Parting, Grooving, Turning and Facing Adapters
HSK A63WH-MAHUR/L
Holders with HSK-T Shanks for 10° Mounting on Mill-Turn Machines for Parting, Grooving, Turning and Facing Adapters
MULTI-CLAMP UNIVERSAL
Universal Clamping Fixtures for a Variety of Taper Shank Toolholders
RM SETTING DEVICE
Reamer Setting Device
EASYLOCK T.C USA
Electrical nut-clamp torque control device.
HSK A63WH-MAHDR-45
Holders with HSK Tapered Shanks for MODULAR-GRIP, Parting, Grooving and Facing Adapters
HSK A63WH ABB
Adapters with HSK Exchangeable Shanks for Boring Bars with Reduction Sleeves
C#-B4340 (blank)
Blanks with CAMFIX (ISO 26623-1 Standard) Exchangeable Tapered Shanks
HSK A-B-MN (blanks)
Blanks with HSK DIN69893/A Tapered Shanks
SM-FT
End Units for Modular Extended Flute Cutters
SDK CAT-FT
Basic Units of Modular Extended Flute Endmills Using S/QDMT 1205... Inserts. Can be Used with Many Extension Options
HMSN-New Britain
Holders for Grooving and Turning Adapters for New Britain Multi-Spindle Bar Machines
UBHCR/L
Holders for Grooving, Turning and Parting Blades
SGTBF
Perpendicular Blocks for Parting and Grooving Blades
PHAR/L
External Machining Holders for PADR/L Adapters
SGTBK
Blocks for Heavy Duty Parting and Grooving Blades
SGTBR/L
Blocks for Parting and Grooving Blades for Conventional Lathes
SGTBU/SGTBN
Blocks for Various Parting and Grooving Blades
F75A
75° Face Mills with HM90 AD..-1505... Inserts
E75A
75° Endmills with AP..-1003... Inserts
HAPR/L
Face Machining Perpendicular Holders for Adapters
HAR/L
Face Machining Adapter Holders
GHAPR/L-8
External Holders for Grooving and Turning With Perpendicularly Oriented Adapters
MAHR/L
Adapter Holders for all GRIP Systems
MAHPR/L
Holders for Perpendicularly Mounted Adapters suitable for all GRIP Systems
HSTBS
Holders for DO-GRIP DGAD Parting Adapters, for Automatic Brown & Sharpe Machines
F86LNX-15
86° Face Mills Using all 8 Cutting Edges of LN..1506... Tangentially Clamped Inserts
CA-SOMT
Cartridges used for large diameter drills
TGTBU
Tool Blocks for TGSU Parting and Grooving Blades
KIT DGFH
Each Kit Contains 1 Parting and Grooving Blade, 10 DO-GRIP Inserts
TGTBU-JHP
Tool Blocks for Parting and Grooving Blades for High-Pressure Coolant