ISCAR Cutting Tools - Metal Working Tools - Milling - Rampdown

Customized Items ×

Choose an item to customize and generate a quotation

FF EWX : HELIDO UPFEED endmills for fast feed, carrying double-sided Inserts with 6 cutting edges.(-)Fast Feed Endmills Carrying Double-Sided Inserts with 6 Cutting Edges(+)

Representative Image

Related tools for : H600 WXCU 070515HP

Designation	DCX	DC	AE	APMX	CICT	BD	LU	LH	OAL	DCONMS	Shank	RMPX°	MDN	MDX	KAPR	Fig.	IC	HAND	MIID		NOF	CCMS	CSP	ZEFF	GICAT
FF EWX D32-3-060-W32-07	32.00	19.00	6.5~	1.50	3	30.70	60.0	63.0	125.00	32.00	W	6.3	51.00	63.00	17.0	2	11.14~	R~	H600 WXCU 070515T	0.60	3~	ZYL10G3200h$06~	1~	3~	3106828
FF EWX D32-3-070-C32-07	32.00	19.00	6.5~	1.50	3	30.70	70.0	73.0	155.00	32.00	C	6.3	51.00	63.00	17.0	2	11.14~	R~	H600 WXCU 070515T	0.76	3~	ZYL01G3200h$06~	1~	3~	3106829
FF EWX D32-3-100-W32-07	32.00	19.00	6.5~	1.50	3	30.70	100.0	103.0	165.00	32.00	W	6.3	51.00	63.00	17.0	2	11.14~	R~	H600 WXCU 070515T	0.78	3~	ZYL10G3200h$06~	1~	3~	3106830
FF EWX D32-3-120-C32-07	32.00	19.00	6.5~	1.50	3	30.70	120.0	123.0	205.00	32.00	C	6.3	51.00	63.00	17.0	2	11.14~	R~	H600 WXCU 070515T	0.99	3~	ZYL01G3200h$06~	1~	3~	3106831
FF EWX D40-4-S50-C32-07	40.00	27.00	6.5~	1.50	4	-	50.0	52.2	150.00	32.00	C	4.2	77.00	79.00	17.0	1	11.14~	R~	H600 WXCU 070515T	0.84	4~	ZYL01G3200h$06~	1~	4~	3107062

For machining recommendations, radius for programming and adaptation click on "More Info"
To generate a straight surface without cusps, the width of cut must not exceed DC

Milling
Main Application

Rampdown
Sub Application

Site Map

Milling Main Application

Rampdown Sub Application

Site Map

Milling
Main Application

Rampdown
Sub Application