DGFHR/L-B-D..(R/L) : Double- and single-ended, parting and grooving reinforced blades for double-ended DGN inserts.
  DesignationB1 W min W maxAA2l1H2h1h4Tmax-rD max R/LGICATGIREMgiic
  DGFHL 26B-2D50   26.01.902.501.608.0110.0033.721.43.618.0042.0L2301566 For Traub machines, model TNC 30, TNM 28, TNS 26/30/42/112, TNA 300, TNK 260. 0
  DGFHR 26B-2D50   26.01.902.501.608.0110.0033.721.43.618.0042.0R2301565 For Traub machines, model TNC 30, TNM 28, TNS 26/30/42/112, TNA 300, TNK 260. 0
  DGFHL 26B-2D50R   26.01.902.501.608.0110.0031.521.43.718.0050.0L2301585 For Tornos Bechler, Emco 2000/20, 2000/26 machines. 0
  DGFHR 26B-2D50L   26.01.902.501.608.0110.0031.521.43.718.0050.0R2301586 For Tornos Bechler, Emco 2000/20, 2000/26 machines. 0
  DGFHL 26B-3D50   26.03.003.182.408.0110.0031.521.43.718.0030.0L2301567 For Traub machines, model TNC 30, TNM 28, TNS 26/30/42/112, TNA 300, TNK 260. 0
  DGFHR 26B-3D50   26.03.003.182.408.0110.0031.521.43.718.0030.0R2398827 For Traub machines, model TNC 30, TNM 28, TNS 26/30/42/112, TNA 300, TNK 260. 0
  DGFHL 26B-3D50R   26.03.003.182.408.0110.0031.521.43.718.0050.0L2301574 For Tornos Bechler, Emco 2000/20, 2000/26 machines. 0
  DGFHR 26B-3D50L   26.03.003.182.408.0110.0031.521.43.718.0050.0R2395969 For Tornos Bechler, Emco 2000/20, 2000/26 machines. 0
  DGFHL 32B-2D50   32.01.902.501.608.0120.0031.524.8-18.0042.0L2301569 For Traub machines, model TNC 42/65, TNM 42/65, TNS 42/60/65, TNA 300/400. 0
  DGFHR 32B-2D50   32.01.902.501.608.0120.0031.524.8-18.0042.0R2301568 For Traub machines, model TNC 42/65, TNM 42/65, TNS 42/60/65, TNA 300/400. 0
  DGFHL 32B-2D50R   32.01.902.501.608.0120.0031.524.8-18.0050.0L2301587 For Tornos Bechler, Emco 2000/20, 2000/26 machines. 0
  DGFHR 32B-2D50L   32.01.902.501.608.0120.0031.524.8-18.0050.0R2301588 For Tornos Bechler, Emco 2000/20, 2000/26 machines. 0
  DGFHL 32B-3D50   32.03.003.182.408.0120.0031.524.8-18.0042.0L2398930 For Traub machines, model TNC 42/65, TNM 42/65, TNS 42/60/65, TNA 300/400. 0
  DGFHR 32B-3D50   32.03.003.182.408.0120.0031.524.8-18.0042.0R2301570 For Traub machines, model TNC 42/65, TNM 42/65, TNS 42/60/65, TNA 300/400. 0
  DGFHL 32B-3D50R   32.03.003.182.408.0120.0031.524.8-18.0050.0L2398840 For Tornos Bechler, Emco 2000/20, 2000/26 machines. 0
  DGFHR 32B-3D50L   32.03.003.182.408.0120.0031.524.8-18.0050.0R2301575 For Tornos Bechler, Emco 2000/20, 2000/26 machines. 0

Insert limit is Tmax=18 mm. If deeper penetration is required, the insert should be modified into single-ended by the user.
DG..1.0 insert can be mounted into pocket sizes 2 and 3. Inthat case the pocket width has to be modified -click on "More Info"