RM-SHR-H7S-CS : DIN 8093 solid carbide reamers with straight flute and a cylindrical shank, for blind holes. - C - solid carbide, CH - brazed solid carbide head with DIN 1809 tang.
  DesignationDrL2L1L5FlutedGICATGIREMgiicGrade
  RM-SHR-0300-H7S-CS-C 3.00061.0030.015.0063.004440001 1IC07 
  RM-SHR-0320-H7S-CS-C 3.20070.0033.018.0063.204440002 1IC07 
  RM-SHR-0350-H7S-CS-C 3.50070.0033.018.0063.504440003 1IC07 
  RM-SHR-0400-H7S-CS-C 4.00075.0044.019.0064.004440004 1IC07 
  RM-SHR-0450-H7S-CS-C 4.50080.0046.021.0064.504440005 1IC07 
  RM-SHR-0500-H7S-CS-C 5.00086.0053.023.0065.004440006 1IC07 
  RM-SHR-0550-H7S-CS-C 5.50093.0056.026.0065.604440007 1IC07 
  RM-SHR-0600-H7S-CS-C 6.00093.0056.026.0065.604440008 1IC07 
  RM-SHR-0650-H7S-CS-C 6.500101.0063.028.0066.304440009 1IC07 
  RM-SHR-0700-H7S-CS-C 07 7.000109.0069.031.0067.104440010 1IC07 
  RM-SHR-0800-H7S-CS-C 8.000117.0075.033.0068.004440012 1IC07 
  RM-SHR-0850-H7S-CS-CH 8.500117.0075.033.0068.004440013 1IC07 
  RM-SHR-0900-H7S-CS-CH 9.000125.0081.036.0069.004440014 1IC07 
  RM-SHR-1000-H7S-CS-CH 10.000133.0087.038.00610.004440016 1IC07 
  RM-SHR-1100-H7S-CS-CH 11.000142.0096.041.00610.004440018 1IC07 
  RM-SHR-1200-H7S-CS-CH 12.000151.00105.044.00610.004440019 1IC07 
  RM-SHR-1300-H7S-CS-CH 13.000151.00105.044.00610.004440020 1IC07 
  RM-SHR-1400-H7S-CS-CH 14.000160.00110.047.00812.504440021 1IC07 
  RM-SHR-1500-H7S-CS-CH 15.000162.00112.050.00812.504440022 1IC07 
  RM-SHR-1600-H7S-CS-CH 16.000170.00120.052.00812.504440023 1IC07 

-C: Solid carbide
-CH: Brazed solid carbide head with DIN 1809 tang
Hole tolerance: H7 manufacturing tolerance according to DIN 1420
Reamers above 5 mm diameter have the tang back-end design
Available grades: IC07 (uncoated), optional: IC907 (TiAlN PVD coated)
Special diameters are available on request

For cutting speed recommendations, click on the required grade number related to specific item geometry