Customized Items ×
Choose an item to customize and generate a quotation
  
GHGR/L : External holders for deep grooving and parting
Representative Image
Left-hand shown
 
Representative Image
Left-hand shown
 
  Designation  GIFUT5CWN  CWX  CUTDIA  CDX  H HF B OAL LH WF WB HBH HAND MINI APMX CCMS CSP  CW KAPR  Tool typGICATGIREMgiic
  GHGL 20-2      00.402.4034.017.00~20.020.020.0120.0033.019.201.70-L-~2.40~VKT01A2020~~~~SQUARE~2800609 In the case of inserts with CW<2 mm, tool pocket should be ground to 0.3 mm thinner than the insert's grooving width. 0
  GHGR 20-2      00.402.4034.017.00~20.020.020.0120.0033.019.201.70-R-~2.40~VKT01A2020~~~~SQUARE~2800608 In the case of inserts with CW<2 mm, tool pocket should be ground to 0.3 mm thinner than the insert's grooving width. 0
  GHGL 25-2      00.402.4034.017.00~25.025.025.0140.0033.024.201.70-L-~2.40~VKT01A2525~~~~SQUARE~2800605 In the case of inserts with CW<2 mm, tool pocket should be ground to 0.3 mm thinner than the insert's grooving width. 0
  GHGR 25-2      00.402.4034.017.00~25.025.025.0140.0033.024.201.70-R-~2.40~VKT01A2525~~~~SQUARE~2800604 In the case of inserts with CW<2 mm, tool pocket should be ground to 0.3 mm thinner than the insert's grooving width. 0
  GHGL 16-3    03.004.0040.020.00~16.016.016.0110.0036.014.702.504.0LMain Spindle~4.00~VKT01A1616~~~~SQUARE~2800233 0
  GHGR 16-3    03.004.0040.020.00~16.016.016.0110.0036.014.702.50-RMain Spindle~4.00~VKT01A1616~~~~SQUARE~2800259 0
  GHGL 16-3 ST      03.004.0034.017.00~16.016.016.078.0033.015.002.404.0LMain Spindle~4.00~VKT01A1212~~~~SQUARE~2861192 For Star and multi-spindle machines. 0
  GHGR 16-3 ST      03.004.0034.017.00~16.016.016.078.0033.015.002.404.0RMain Spindle~4.00~VKT01A1616~~~~SQUARE~2800260 For Star and multi-spindle machines. 0
  GHGL 20-3    03.004.0040.020.00~20.020.020.0120.0036.018.702.50-L-~4.00~VKT01A2020~~~~SQUARE~2800238 0
  GHGR 20-3    03.004.0040.020.00~20.020.020.0120.0036.018.702.50-R-~4.00~VKT01A2020~~~~SQUARE~2800263 0
  GHGL 25-3    03.004.0040.020.00~25.025.025.0140.0036.023.702.50-L-~4.00~VKT01A2525~~~~SQUARE~2800245 0
  GHGR 25-3    03.004.0040.020.00~25.025.025.0140.0036.023.702.50-R-~4.00~VKT01A2525~~~~SQUARE~2800270 0
  GHGR 16-4    04.005.0040.020.00~16.016.016.0110.0036.014.403.204.0R-~5.00~VKT01A1616~~~~SQUARE~2800777 0
  GHGL 20-4    04.005.0040.020.00~20.020.020.0120.0036.018.203.50-L-~5.00~VKT01A2020~~~~SQUARE~2800240 0
  GHGR 20-4    04.005.0040.020.00~20.020.020.0120.0036.018.203.50-R-~5.00~VKT01A2020~~~~SQUARE~2800265 0
  GHGL 25-4    04.005.0040.020.00~25.025.025.0140.0036.023.203.50-L-~5.00~VKT01A2525~~~~SQUARE~2800247 0
  GHGR 25-4    04.005.0040.020.00~25.025.025.0140.0036.023.203.50-R-~5.00~VKT01A2525~~~~SQUARE~2800272 0
  GHGL 25-425    04.005.0050.025.00~25.025.025.0140.0041.023.203.50-L-~5.00~VKT01A2525~~~~SQUARE~2800650 0
  GHGR 25-425    04.005.0050.025.00~25.025.025.0140.0041.023.203.50-R-~5.00~VKT01A2525~~~~SQUARE~2800649 0
  GHGL 25-5    05.006.4050.025.00~25.025.025.0140.0041.022.904.20-L-~6.40~VKT01A2525~~~~SQUARE~2800249 0
  GHGR 25-5    05.006.4050.025.00~25.025.025.0140.0041.022.904.20-R-~6.40~VKT01A2525~~~~SQUARE~2800274 0
  GHGL 32-5    05.006.4050.025.00~32.032.032.0150.0041.029.904.20-L-~6.40~VKT01A3232~~~~SQUARE~2800253 0
  GHGR 32-5    05.006.4050.025.00~32.032.032.0150.0041.029.904.20-R-~6.40~VKT01A3232~~~~SQUARE~2800278 0
  GHGL 25-630    06.008.0060.030.00~25.025.025.0140.0045.022.305.40-L-~8.00~VKT01A2525~~~~SQUARE~2800648 0
  GHGR 25-630    06.008.0060.030.00~25.025.025.0140.0045.022.305.40-R-~8.00~VKT01A2525~~~~SQUARE~2800647 0
  GHGL 32-632    06.008.0064.032.00~32.032.032.0170.0050.029.405.40-L-~8.00~VKT01A3232~~~~SQUARE~2800779 0
  GHGR 32-632    06.008.0064.032.00~32.032.032.0170.0050.029.405.40-R-~8.00~VKT01A3232~~~~SQUARE~2800778 0
For machining depth over 13 mm, a single-ended insert is required (GIM, GIMF,GIMY,GIMT,GIMN)
CDX for grooving depth depends on part diameter Dmax
For grooving a part with a diameter larger than CUTDIA, click on "More Info"
For using TIP inserts, tool holder seat needs to be modified according to insert profile to ensure clearance
For key blades and adjustable torque handles information (optional), click on "More Info"


Site Map

Groove-Turn & Parting  ISO-Turning   Threading   Milling   Hole Making   Reaming   Boring   Tooling Systems   Modular Adaptations  Multifunction Tools 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024 ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved