PICCO R/L-60°-Thread : Inserts with a 60° internal thread profile for 2.4 mm min. bore diameter.
Right-hand shown
COOLANT THROUGH TOOL 
  DesignationdPitchtewYfal2l1D minGICATGIREMgiicTough ‹————› Hard
Grade & Vc
  PICCO R 003.0105-8 4.000.500.270.040.30.302.308.022.002.406403941 1IC908 
  PICCO R 004.0105-10 4.000.500.270.090.41.003.0010.024.003.206403940 1IC908 
  PICCO L 004.0205-15 4.000.500.270.060.41.503.5015.030.004.006402445 1IC228 
  PICCO R 004.0205-15 4.000.500.270.060.41.503.5015.030.004.006402444 1IC228 
  PICCO L 005.0205-15 5.000.500.270.060.41.904.4015.030.005.006402447 1IC228 
  PICCO R 005.0205-15 5.000.500.270.060.41.904.4015.030.005.006402446 1IC228 
  PICCO L 005.0407-15 5.000.750.400.090.51.904.4015.030.005.006402449 1IC228 
  PICCO R 005.0407-15 5.000.750.400.090.51.904.4015.030.005.006480701 2IC228 IC908 
  PICCO R 005.0407-20 5.000.750.400.090.51.904.4020.035.005.006412033 1IC908 
  PICCO L 005.0510-15 5.001.000.550.120.61.904.4015.030.004.806402437 1IC228 
  PICCO R 005.0510-15 5.001.000.550.120.61.904.4015.030.004.806402436 1IC228 
  PICCO R 005.0510-20 5.001.000.550.120.61.904.4020.035.004.806412032 1IC908 
  PICCO L 006.0510-15 6.001.000.550.120.62.305.3015.030.006.006402451 1IC228 
  PICCO R 006.0510-15 6.001.000.550.120.62.305.3015.030.006.006402450 1IC228 
  PICCO R 006.0510-22 6.001.000.550.120.62.305.3022.037.006.006412036 1IC908 
  PICCO L 006.0612-15 6.001.250.680.150.72.305.3015.030.006.006402439 1IC228 
  PICCO R 006.0612-15 6.001.250.680.150.72.305.3015.030.006.006402438 1IC228 
  PICCO R 006.0612-22 6.001.250.680.150.72.305.3022.037.006.006412034 1IC908 
  PICCO L 006.0815-15 6.001.500.810.180.82.305.3015.030.006.006402441 1IC228 
  PICCO R 006.0815-15 6.001.500.810.180.82.305.3015.030.006.006402440 1IC228 
  PICCO R 006.0815-22 6.001.500.810.180.82.305.3022.037.006.006412035 1IC908 
  PICCO L 007.0815-15 7.001.500.810.180.82.706.3015.030.007.006402443 1IC228 
  PICCO R 007.0815-15 7.001.500.810.180.82.706.3015.030.007.006402442 1IC228 


For cutting speed recommendations, click on the required grade number related to specific item geometry