DGFH : Double-ended parting and grooving blades for DO-GRIP and HELI-GRIP double-ended inserts. Blades with coolant holes are designated with "C".
  DesignationB1W minW maxAl1h1D maxGICATGIREMgiic
  DGFH 26-1.4 26.01.401.402.50 110.0021.426.02395946 0
  DGFH 26-2   26.01.90 2.501.60110.0021.439.0 2301241 For Dmax 50 mm, use single-ended insert (should be modified by the user). 0
  DGFH 26-3   26.03.00 3.182.40110.0021.439.0 2301242 For Dmax 50 mm, use single-ended insert (should be modified by the user). 0
  DGFH 26C-3   26.03.003.182.40110.0021.439.0 2301928 Blades with frontal coolant holes (JET-CUT) @For Dmax 50 mm, use single-ended insert (should be modified by the user). 0
  DGFH 26-4 26.04.004.003.20110.0021.480.02301243 0
  DGFH 32-1.4 32.01.401.402.50 150.0024.826.02301449 0
  DGFH 32-2   32.01.90 2.501.80150.0024.839.0 2301244 For Dmax 50 mm, use single-ended insert (should be modified by the user). 0
  DGFH 32-3   32.03.00 3.182.40150.0024.839.0 2301245 For Dmax 50 mm, use single-ended insert (should be modified by the user). 0
  DGFH 32C-3   32.03.003.182.40150.0024.839.0 2301745 Blades with frontal coolant holes (JET-CUT) @For Dmax 50 mm, use single-ended insert (should be modified by the user). 0
  DGFH 32-4 32.04.004.003.20150.0024.8100.02301246 0
  DGFH 32C-4   32.04.004.003.20150.0024.869.02301770 These blades are suitable for turning, using GRIP 4 inserts @ Blades with frontal coolant holes (JET-CUT) 0
  DGFH 32-5 32.05.005.004.00150.0024.8120.02301247 0
  DGFH 32-6 32.06.006.355.20150.0024.8120.02301268 0
  DGFH 45-3 45.03.00 3.182.40225.0038.0160.02301322 0
  DGFH 45-4 45.04.004.103.20225.0038.0160.02301323 0
  DGFH 45-5 45.04.805.004.00225.0038.0160.02301324 0
  DGFH 45-6 45.06.006.405.20225.0038.0160.02301325 0

DG..1.0 insert can be mounted into pocket sizes 2 and 3. In that case the pocket width has to be modified - click on "More Info".