DGTR/L : Integral shank parting and grooving tools.
Right-hand shown Left-hand shown
  DesignationW minW maxhbAl1l2h4D maxR/LGICATGIREMgiic
  DGTL 1010-2 1.902.5010.010.01.80150.0029.06.635.0L2301249 0
  DGTR 1010-2 1.902.5010.010.01.80150.0029.06.635.0R2301248 0
  DGTL 1212-2 1.902.5012.012.01.80150.0029.06.635.0 L2301251 0
  DGTR 1212-2 1.902.5012.012.01.80150.0029.06.635.0 R2301250 0
  DGTL 1616-2 1.902.5016.016.01.80150.0029.02.635.0 L2301253 0
  DGTR 1616-2 1.902.5016.016.01.80150.0029.02.635.0 R2301252 0
  DGTL 2012-2 1.902.5020.012.01.80125.0029.0-35.0 L2301321 0
  DGTR 2012-2 1.902.5020.012.01.80125.0029.0-35.0 R2301320 0
  DGTL 1212-3 3.003.1812.012.02.50150.0029.06.635.0 L2301255 0
  DGTR 1212-3 3.003.1812.012.02.50150.0029.06.635.0 R2301254 0
  DGTL 1616-3 3.003.1816.016.02.50150.0029.06.635.0 L2301257 0
  DGTR 1616-3 3.003.1816.016.02.50150.0029.06.635.0 R2301256 0
  DGTL 2012-3 3.003.1820.012.02.50125.0029.0-35.0 L2301259 0
  DGTR 2012-3 3.003.1820.012.02.50125.0029.0-35.0 R2301258 0
  DGTL 2020-3 3.003.1820.020.02.50125.0029.0-35.0 L2301261 0
  DGTR 2020-3 3.003.1820.020.02.50125.0029.0-35.0 R2301260 0
  DGTL 2525-3 3.003.1825.025.02.50150.0029.0-35.0 L2301263 0
  DGTR 2525-3 3.003.1825.025.02.50150.0029.0-35.0 R2301262 0
  DGTL 2020-4 4.004.7620.020.03.40125.0031.0-51.0L2301265 0
  DGTR 2020-4 4.004.7620.020.03.40125.0031.0-51.0R2301264 0
  DGTL 2525-4 4.004.7625.025.03.40150.0031.0-51.0L2301267 0
  DGTR 2525-4 4.004.7625.025.03.40150.0031.0-51.0R2301266 0
  DGTL 2020-5 4.805.0020.020.04.00125.0033.0-59.0L2301330 0
  DGTR 2020-5 4.805.0020.020.04.00125.0033.0-59.0R2301327 0
  DGTL 2525-5 4.805.0025.025.04.00150.0033.0-76.0L2301331 0
  DGTR 2525-5 4.805.0025.025.04.00150.0033.0-76.0R2301328 0
  DGTL 2525-6 6.006.3525.025.05.30150.0033.0-76.0L2301332 0
  DGTR 2525-6 6.006.3525.025.05.30150.0033.0-76.0R2301329 0

Insert limit is Tmax=18 mm. If deeper penetration is required, the insert should be modified into single-ended by the user.
DG..1.0 insert can be mounted into pocket sizes 2 and 3. In that case the pocket width has to be modified-click on "More Info"