ISO | Material | Material Designation | Material Condition | Hardness | Cutting Speed Recommendations (Vc) |
N | 21 | Aluminum-wrought alloys | Not hardenable | 60 HB | 365-1065 m/min |
N | 22 | Aluminum-wrought alloys | Hardenable | 100 HB | 295-925 m/min |
N | 23 | Aluminum-cast alloys <=12% Si | Not hardenable | 75 HB | 295-925 m/min |
N | 24 | Aluminum-cast alloys <=12% Si | Hardenable | 90 HB | 200-570 m/min |
N | 25 | Aluminum-cast alloys >12% Si | High temperature | 130 HB | 190-350 m/min |
N | 26 | Copper alloys >1% Pb | Free cutting | 110 HB | 185-350 m/min |
N | 27 | Copper alloys | Brass | 90 HB | 140-265 m/min |
N | 28 | Copper alloys | Electrolytic copper | 100 HB | 95-185 m/min |
N | 29 | Non metallic. | Duro& fiber plastics | | 55-220 m/min |