Grade : IC635

For low speed, high feed and unfavorable conditions.

PropertyValue
ISO Range - P/M/K(P30-P50)(M20-M40)
ISO Range - N/S/H

PropertyValue
Grade or Coating TypeCVD
Coating Layers TiN+TiC+TiN


Find group of specific workpiece material (opens in a new window)


Cutting Speed for: GFF 6N IC635 - 6000036
ISOMaterialMaterial DesignationMaterial ConditionHardnessCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed125 HB110-150 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed190 HB85-120 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55% CQuenched and tempered250 HB70-110 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55% CAnnealed220 HB80-115 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55% CQuenched and tempered.300 HB70-105 m/min
P6Low alloy and cast steel (less than 5% of alloying elements)Annealed200 HB75-105 m/min
P7Low alloy and cast steel (less than 5% of alloying elements)Quenched and tempered275 HB65-105 m/min
P8Low alloy and cast steel (less than 5% of alloying elements)Quenched and tempered300 HB70-105 m/min
P9Low alloy and cast steel (less than 5% of alloying elements)Quenched and tempered350 HB50-85 m/min
P10High alloyed steel, cast steel and tool steelAnnealed200 HB65-90 m/min
P11High alloyed steel, cast steel and tool steelQuenched and tempered325 HB45-65 m/min
P12Stainless steel and cast steelFerritic/martensitic200 HB65-140 m/min
P13Stainless steel and cast steelMartensitic240 HB60-135 m/min
M14Stainless steel and cast steelAustenitic, duplex180 HB50-130 m/min
S31High temp. alloys Fe basedAnnealed200 HB25-45 m/min
S32High temp. alloys Fe basedHardened280 HB20-40 m/min
S33High temp. alloys Ni or Co basedAnnealed250 HB15-20 m/min
S34High temp. alloys. Ni or Co basedHardened350 HB15-20 m/min
S35High temp. alloys. Ni or Co basedCast320 HB15-20 m/min
S36Titanium (pure)Pure190 HB15-20 m/min
S37Titanium alloysAlpha+beta alloys, hardened310 HB15-30 m/min

Site Map

Groove-Turn & Parting  ISO-Turning   Threading   Milling   Hole Making   Reaming   Boring   Tooling Systems   Modular Adaptations  Multifunction Tools 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2024 ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved