PARTING, GROOVE-TURN, THREADING, TOOLING
NPA 03/2018



Expanding the Multi Connection (MC) JHP Line - Tools with Bottom Fed High Pressure Coolant Channel for Mounting on VDI DIN69880 Tool Holders

JetCut

Highlights

ISCAR is expanding the Multi Connection (MC) JHP Line by adding parting, grooving, threading and turning tools for VDI tool holders with a bottom fed coolant system.


The new system consists of specially designed JHP-MC turning and grooving tools with a bottom coolant inlet hole and VDI-JHPMC tool holders featuring a long coolant outlet slot that enables adjustment of the tool’s overhang.

VDI DIN69880 is the most popular quick change adaptation system for CNC turning machines with disc-type turrets. This standard holder adaptation serves mainly stationary turning or drilling tools.

The tools are widely used by European, Japanese, Korean, USA, Chinese and Taiwanese MTBs, due to their simplicity, low-cost and tool clamping rigidity.

VDI DIN69880 Characteristics
  • Easy and fast set-up
  • High stiffness, thanks to straight shank and flange face contact
  • Rigid design due to a serrated clamping system
  • High accuracy and center height repeatability
  • Compact and light design
  • Efficient coolant supply internally through the tool and externally through the flange


JETCUT Features
The new JHP tools are essential and important in the aviation, aerospace and medical industries.

Note
The shank lengths of the tools are shorter than the lengths of equivalent standard tools - adjusted to the VDI tool holders.


Max. tool overhang

Min. tool overhang


DGTR/L-B-D-JHP-SL-MC
Parting and Grooving Tools with Bottom Inlets for High Pressure Coolant
1) Cutting width minimum
(2) Cutting width maximum
Note: Parameter designations are according to ISO13399 standard.





TGTR/L-JHP-MC
Parting and Grooving Toolholders with Bottom Inlets for High Pressure Coolant Carrying TANG-GRIP Inserts
(1) Cutting width minimum
(2) Cutting width maximum
Note: Parameter designations are according to ISO13399 standard.

* Optional, should be ordered separately


GHDR/L-JHP-MC (short pocket)
Grooving and Turning Tools with Bottom Inlet Coolant Channels
• For using TIP and GPV inserts, toolholder seat needs to be modified according to insert profile to ensure clearance
(1) Cutting width minimum
(2) Cutting width maximum




PCHR/L-24-JHP-MC
Grooving, Parting and Recessing Tools Carrying PENTA Inserts with Bottom Inlets for High Pressure Coolant
(1) Cutting width minimum
(2) Cutting width maximum
(3) For specific information, refer to insert data.
Note: Parameter designations are according to ISO13399 standard.




PCHR/L-34-JHP-MC
Grooving, Parting and Recessing Tools Carrying PENTA Inserts with Bottom Inlets for High Pressure Coolant
(1) Cutting width minimum
(2) Cutting width maximum
(3) For specific information, refer to insert data
Note: Parameter designations are according to ISO13399 standard.




MAHR/L-JHP-MC
Holders with Bottom Inlets for High Pressure Coolant Channels Carrying MODULAR-GRIP Grooving and Turning Adapters
• For Tmax, refer to the adapters data.






MAHR/L-MG-XL-JHP-MC
Holders with Bottom Inlets for High Pressure Coolant Channels Carrying Parting and Grooving Adapters
• For Tmax, refer to the adapters data






SER/L-JHP-MC
Holders with Bottom Inlets for High Pressure Coolant Channels Carrying Parting and Grooving Adapters
• All tools are made for 1.5 helix angle
• For multi-tooth inserts use anvils AE16M / AI16M; AE22M / AI22M; AE27M / AI27M
• For GTGA inserts, use anvil AE 16-0
(1) Right-hand inserts (ER) for right-hand tools (SER)
Note: Parameter designations are according to ISO13399 standard.





SER/L-TT-JHP-MC
External Threading Tools with Bottom Inlet Coolant Channels, Carrying Inserts with 10 Threading Corners
• IMPORTANT: Applying coolant through the tool is mandatory
Note: Parameter designations are according to ISO13399 standard.





DWLNR/L-JHP-MC
Rigid Clamp Tools with Channels for High Pressure Coolant Carrying the 80° Trigon Inserts






PWLNR/L-X-JHP-MC
Lever Lock Tools with Bottom Inlets for High Pressure Coolant Channels Carrying HELITURN LD WNMX and WNMG Trigon Inserts







DCLNR/L-JHP-MC
Rigid Clamp Tools with Channels for High Pressure Coolant Carrying the 80° Rhombic Inserts






PCLNR/L-X-JHP-MC
Lever Lock Tools with Bottom Inlets for High Pressure Coolant Channels Carrying the CNMX/CNMG 80° Rhombic Inserts
• Supplied with TCX 3 seat for CNMX 0906.. inserts and TCN 323 seat for CNMG 0904.. inserts. TCX 4 seat for CNMX 1207.. inserts and TCN 443 seat for CNMG 1204.. inserts.



(a) For CNMX 0906.. (CNMX 34.) inserts
(b) For CNMX 1207.. (CNMX 45.) inserts
(c) For CNMG 0904.. (CNMG 33.) inserts
(d) For CNMG 1204.. (CNMG 43.) inserts



PTGNR/L-X-JHP-MC
Tools with Bottom Inlets for High Pressure Coolant Carrying the TNMX and TNMG Triangular Inserts
• Supplied with TTX 3 seat for TNMX 1606.. inserts and TTN 3 seat for TNMG 1604.. inserts.






PCLCR/L-JHP-MC
Tools with Channels for High Pressure Coolant Carrying 80° Positive Rhombic Inserts for Swiss Automatic Machines







DDJNR/L-JHP-MC
Rigid Clamp Tools with Channels for High Pressure Coolant Carrying the 55° Rhombic Inserts




PDACR/L-JHP-MC
Tools with Channels for High Pressure Coolant Carrying the 55° Positive Rhombic Inserts for Swiss Automatic Machines







PVACR/L-JHP-MC
Tools with Channels for High Pressure Coolant Carrying the 35° Positive Rhombic Inserts for Swiss Automatic Machines







PVDI-B1/B4A-JHPMC
Radially Oriented, Short, Right-Hand Holders with VDI DIN69880 Shanks for Square Shank Tools
• Form B1 radial R.H. short, form B4 radial overhead L.H. short
Note: Parameter designations are according to ISO13399 standard.


VDI-B1/B4AK-JHPMC
Radially Oriented, Short, Right-Hand, Wedge Clamping Holders with VDI DIN69880 Shanks for Square Shank Tools
• Form B1 radial R.H. short, form B4 radial overhead L.H. short.



VDI-B2/B3A-JHPMC
Radially Oriented, Short, Left-Hand Holders with VDI DIN69880 Shanks for Square Shank Tools
• Form B2 radial L.H. short, form B3 radial overhead R.H. short.
Note: Parameter designations are according to ISO13399 standard.


VDI-B2/B3AK-JHPMC
Radially Oriented, Short, Left-Hand, Wedge Clamping Holders with VDI DIN69880 Shanks for Square Shank Tools
• Form B2 radial L.H. short, form B3 radial overhead R.H. short.


VDI-C1/C4A-JHPMC
Axially Oriented, Short, Right-Hand Holders with VDI DIN69880 Shanks for Square Shank Tools
• Form C1 axial R.H., form C4 axial overhead L.H. short.
Note: Parameter designations are according to ISO13399 standard.



VDI-C1/C4AK-JHPMC
Axially Oriented, Short, Right-Hand, Wedge Clamping Holders with VDI DIN69880 Shanks for Square Shank Tools
• Form C1 axial R.H., form C4 axial overhead L.H. short.


VDI-C2/C3A-JHPMC
Axially Oriented, Short, Left-Hand Holders with VDI DIN69880 Shanks for Square Shank Tools
• Form C1 axial R.H., form C4 axial overhead L.H. short.
Note: Parameter designations are according to ISO13399 standard.



VDI-C2/C3AK-JHPMC
Axially Oriented, Short, Left-Hand, Wedge Clamping Holders with VDI DIN69880 Shanks for Square Shank Tools
• Form C2 axial L.H., form C3 axial overhead R.H. short.


V-ASH-MC
Axially Oriented, Short, Right-Hand, Wedge Clamping Holders for Square Shank Tools


The NPA03-2018's pdf file: View (PDF) or Download (ZIP)
Terms of Use and Legal Disclaimer    Privacy Statement
© ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved